Radiolink R7FG 7-kanals RC Gyro-modtager Brugsanvisning

1. Introduktion

The Radiolink R7FG is a 7-channel RC receiver designed for various remote-controlled vehicles, including crawlers, drifting cars, and boats. It features an integrated gyroscope for enhanced stability, real-time voltage telemetry, and a water-splash proof design (IPX4). This manual provides detailed instructions for setting up, operating, and maintaining your R7FG receiver.

Figure 1: Radiolink R7FG 7-Channel RC Gyro Receiver

2. Sikkerhedsoplysninger

This product is not a toy. It is not suitable for children under 14 years of age. Always operate RC equipment responsibly and follow all safety guidelines provided by your vehicle's manufacturer.

• Sørg for, at alle forbindelser er sikre før brug.
• Verify correct polarity when connecting power to avoid damage.
• Do not expose the receiver to extreme temperatures or direct sunlight for prolonged periods.
• While water-splash proof, avoid full submersion to prevent potential damage.

3. Hvad er der i æsken

Når du åbner din pakke, bør du finde følgende varer:

• 1x R7FG Receiver
• 1x Voltage Telemetri kabel

4. Opsætning

4.1. Binding Process

The R7FG receiver features a convenient 'Push to Bind' function, eliminating the need for a bind plug or complex radio settings.

1. Tænd for din sender.
2. Connect power to the R7FG receiver.
3. Press and hold the bind button on the receiver for approximately 1 second. The LED indicator on the receiver will flash rapidly, indicating it is in binding mode.
4. Once the binding is successful, the LED on the receiver will turn solid green (Normal Mode) or solid red (Gyro Mode).

Figure 2: Location of the Bind Button on the R7FG Receiver

4.2. Tilslutningsvejledning

Proper connection of the receiver to your Electronic Speed Control (ESC) and battery is crucial for correct operation and telemetry functionality.

Figure 3: Standard Vehicle Power Connection

Figure 4: Vehicle Power and Voltage Telemetry Connection

For bdtage telemetry, connect the included voltage telemetry cable between your vehicle's battery and the telemetry port on the R7FG receiver, as shown in Figure 4.

4.3. Gyro Mode Indication

The R7FG receiver's LED indicates its current operating mode:

• Fast grøn LED: Normal Mode (Gyro function is off).
• Konstant rød LED: Gyro Mode (Gyro function is active).

Figure 5: Green LED for Normal Mode, Red LED for Gyro Mode

5. Operating the R7FG Receiver

5.1. Real-time Telemetry

When connected to a compatible Radiolink transmitter (e.g., RC8X, RC6GS V2/V3, RC4GS V2/V3), the R7FG receiver can transmit real-time data back to your transmitter screen. This includes:

• Køretøjsbatteri Voltage: Helps prevent over-discharge and damage to your battery.
• RSSI Signal Strength: Indicates the strength of the radio signal, allowing you to monitor connection quality.

Figur 6: Eksample of Telemetry Data Displayed on a Compatible Transmitter

5.2. Integrated Gyro Function

The built-in gyroscope helps maintain the vehicle's stability and keeps it in a straight line, which is particularly useful for drifting and on-road cars. The gyro sensitivity can be adjusted directly from your compatible transmitter.

Figure 7: Visual representation of vehicle stability with and without gyro assistance.

5.3. Water-Splash Proof (IPX4)

The R7FG receiver is rated IPX4, providing protection against water splashes from any direction. This makes it suitable for use in environments where light moisture may be present, such as near puddles or in light rain. However, it is not designed for submersion.

Figure 8: R7FG receiver installed in an RC vehicle operating in a splash-prone environment.

6. Vedligeholdelse

To ensure the longevity and optimal performance of your R7FG receiver, follow these maintenance guidelines:

• Keep the receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Regularly inspect all wiring and connectors for signs of wear or damage. Replace any damaged components immediately.
• Store the receiver in a dry, cool environment when not in use.
• Avoid exposing the receiver to strong vibrations or impacts.

7. Fejlfinding

If you encounter issues with your R7FG receiver, consider the following common troubleshooting steps:

• Ingen strøm/LED slukket: Check battery connections and ensure the battery is charged. Verify correct polarity.
• No Signal/Control: Re-perform the binding process. Ensure your transmitter is powered on and within range. Check for interference from other 2.4GHz devices.
• Uregelmæssig kontrol: Check all servo and ESC connections. Ensure the receiver is securely mounted and not experiencing excessive vibration. Adjust gyro sensitivity if the issue is related to vehicle stability.
• Telemetry Not Displaying: Bekræft voltage telemetry cable is correctly connected to both the battery and the receiver's telemetry port. Ensure your transmitter supports telemetry display for the R7FG.

For more detailed troubleshooting or persistent issues, please refer to the online user instruction or contact Radiolink customer support.

8. Specifikationer

Figure 9: R7FG Receiver Dimensions and Key Specifications

9. Compatible Transmitters

The Radiolink R7FG receiver is compatible with a range of Radiolink transmitters, including:

• Radiolink RC8X
• Radiolink RC6GS V3 (and V2)
• Radiolink RC4GS V3 (and V2)
• Radiolink T8S
• Radiolink T8FB
• Radiolink T12D
• Radiolink T16D

Figur 10: Overview of compatible Radiolink transmitters.

10. Receiver Comparison

For comparison with other Radiolink receivers, refer to the table below:

Figure 11: Comparison of R7FG with other Radiolink receiver models.

11. Garanti og support

11.1. Garantioplysninger

Radiolink products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Radiolink customer service directly. Keep your proof of purchase for warranty claims.

11.2. Kundesupport

For technical assistance, troubleshooting, or any questions regarding your Radiolink R7FG receiver, please contact Radiolink customer support. You can find support information on the Radiolink Direct store or through their official website. Full user manuals and FAQ troubleshooting files are also available on product pages.

Kontaktoplysninger:

• Refer to the Radiolink Direct store on Amazon: Radiolink-butik
• Consult online user instructions and FAQ files.