Indledning
Thank you for choosing the Astrum ET200 Earphone. This in-ear Bluetooth 4.0 earphone is designed to provide clear sound for both voice calls and music playback. Featuring dual pairing capability and a comfortable hook design, it offers up to 5 hours of talk time. Its high-performance speakers deliver rich bass and precise treble, ensuring a premium audio experience.
Produkt overview
Figur 1: Forside view of the Astrum ET200 Earphone in white, showcasing its compact design and ear hook.
Figur 2: Side view of the Astrum ET200 Earphone, highlighting the indicator light and control button area.
Figure 3: Both white and black versions of the Astrum ET200 Earphone, illustrating the overall form factor.
Opsætning
1. Charging the Earphone
Before first use, fully charge the earphone. Connect the charging cable (not specified, assuming standard micro-USB) to the charging port on the earphone and the other end to a USB power source (e.g., computer USB port, wall adapter). The indicator light will typically show red during charging and turn blue or off when fully charged.
2. Bluetooth-parring
- Tænd: Press and hold the Multi-function Button (MFB) until the indicator light flashes blue and red alternately. This indicates the earphone is in pairing mode.
- Aktiver Bluetooth: On your mobile device or computer, enable Bluetooth.
- Søg efter Enheder: Scan for available Bluetooth devices. You should see "Astrum ET200" or a similar name appear in the list.
- Forbinde: Select "Astrum ET200" from the list to connect. Once successfully paired, the indicator light will typically flash blue slowly or turn off.
- Dobbelt parring: To pair a second device, disconnect the earphone from the first device, put it back into pairing mode, and connect to the second device. Then, reconnect to the first device from its Bluetooth settings. The earphone will now be connected to both devices simultaneously.
Betjeningsvejledning
- Tænd: Press and hold the MFB for approximately 3 seconds until the blue indicator light flashes.
- Sluk: Press and hold the MFB for approximately 5 seconds until the red indicator light flashes and then turns off.
- Besvar/afslut opkald: Press the MFB once to answer an incoming call. Press the MFB once again to end an active call.
- Afvis opkald: Press and hold the MFB for approximately 2 seconds to reject an incoming call.
- Genopkald sidste nummer: Double-press the MFB to redial the last dialed number.
- Afspil/sæt musik på pause: Press the MFB once to play or pause music playback.
- Lydstyrkekontrol: (Assuming volume buttons are present, as is common for BT earphones) Use the volume up (+) and volume down (-) buttons on the earphone to adjust the volume. If no dedicated buttons, adjust volume from your connected device.
- Næste / forrige nummer: (Assuming track control buttons are present) Use the next track (>>) and previous track (<<) buttons on the earphone to skip tracks. If no dedicated buttons, control from your connected device.
Opretholdelse
- Rensning: Use a soft, dry cloth to clean the earphone. Do not use abrasive cleaners or solvents.
- Opbevaring: Store the earphone in a cool, dry place away from direct sunlight and extreme temperatures.
- Batteripleje: To prolong battery life, avoid fully discharging the battery frequently. Charge the earphone regularly, even if not in use for extended periods.
- Vandtæthed: This earphone is not waterproof. Avoid exposure to water or excessive moisture.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Earphone does not power on. | Lavt batteri. | Charge the earphone fully. |
| Kan ikke parres med enheden. | Earphone not in pairing mode; Bluetooth off on device; too far from device. | Ensure earphone is in pairing mode (flashing blue/red). Turn on Bluetooth on your device. Move earphone closer to device (within 10 meters). |
| Ingen lyd eller lav lydstyrke. | Volume too low on earphone or device; earphone not connected properly. | Increase volume on both the earphone and your connected device. Reconnect the earphone to your device. |
| Intermitterende forbindelse. | Interference; too far from device; low battery. | Move closer to your device. Avoid strong electromagnetic interference. Charge the earphone. |
Specifikationer
| Modelnummer | 1046 |
| Bluetooth version | 4.0 |
| Formfaktor | In-Ear with Hook |
| Taletid | Op til 5 timer |
| Funktioner | Voice + Music, Dual Pairing, Clear Sound, Rich Bass, Precise Treble |
| Dimensioner (LxBxH) | 3.5 x 3.5 x 12.8 cm |
| Varens vægt | 10 g |
| Farve | Hvid |
| Fabrikant | Astrum Electronics India Pvt. Ltd. |
Garanti og support
Garantioplysninger
The Astrum ET200 Earphone comes with a 1 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl. Gem venligst din købsbevis i tilfælde af garantikrav.
Kundesupport
For any technical assistance, troubleshooting, or warranty claims, please contact Astrum customer support through their official website or the retailer from whom you purchased the product. Please have your product model number (1046) and proof of purchase ready when contacting support.
