Tanita Cooking Thermometer TT-583 GR Instruction Manual

1. Introduktion

The Tanita Cooking Thermometer TT-583 GR is a precision instrument designed for accurate temperature measurement in various culinary applications. Its waterproof design and extended sensor allow for safe and convenient use, ensuring optimal cooking results. This manual provides essential information for the proper setup, operation, and maintenance of your thermometer.

2. Produktet er slutview

The TT-583 GR features a long sensor probe, a clear digital display, and a convenient sensor holder that doubles as a handle. It also includes a magnet for easy storage.

Image 2.1: Tanita Cooking Thermometer TT-583 GR and its sensor holder.

2.1 Komponenter og funktioner

Image 2.2: Labeled components of the TT-583 GR thermometer.

1. Kroghul: Insert the tip of the sensor holder into this hole. This allows for measurement while keeping your hand further away from heat sources.
2. HOLD knap: Press this button during temperature measurement to freeze the displayed temperature value for easier reading and confirmation.
3. ON/OFF knap: Press to power the device on or off. The thermometer features an auto power-off function that activates after approximately 10 minutes of inactivity, or if the ambient temperature is below 45°C and the temperature change is less than 3°C.
4. Visningsområde: The digital screen shows the temperature readings. It is designed for clear readability whether held in the left or right hand.

3. Opsætning

3.1 Batteriinstallation

The Tanita TT-583 GR uses one CR2032 coin cell battery. A trial battery is included with your purchase.

1. Locate the battery compartment cover on the back of the thermometer unit.
2. Use a small coin or screwdriver to open the battery compartment.
3. Isæt CR2032-batteriet med den positive (+) side opad.
4. Sæt batterirummets dæksel på igen og fastgør det.

Ensure the battery is correctly installed for proper device function.

4. Betjening

4.1 Grundlæggende temperaturmåling

1. Tryk på ON/OFF knappen for at tænde termometeret.
2. Insert the stainless steel sensor probe into the food or liquid you wish to measure. The sensor is 14 cm long, allowing for deep insertion and safe distance from heat.
3. Read the temperature displayed on the digital screen. The display updates every 1 second.
4. To turn off the thermometer, press the ON/OFF button again. The device will also automatically power off after approximately 10 minutes of inactivity.

Image 4.1: Measuring the temperature of melted chocolate.

4.2 Brug af HOLD-funktionen

The HOLD function allows you to freeze the current temperature reading on the display.

1. While measuring temperature, press the HOLDE button. The current temperature will remain on the display.
2. To resume live temperature measurement, press the HOLDE knappen igen.

4.3 Sensor Holder Usage

The included sensor holder can be used to extend your reach and protect your hands from heat.

1. Insert the tip of the thermometer's sensor holder into the hook hole located on the main unit.
2. This configuration allows you to hold the thermometer further away from hot surfaces or liquids during measurement.

Billede 4.2: Eks.amples of thermometer use for drip coffee, steak, vegetable washing, and baby milk.

5. Vedligeholdelse

5.1 Rengøring

The Tanita TT-583 GR has an IPX2 waterproof rating, meaning it is protected against dripping water. To clean the thermometer:

• Wipe the sensor probe and main unit with a damp klæde.
• Do not immerse the entire unit in water or wash it under running water, as this may damage internal components.
• Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.

5.2 Opbevaring

For convenient and space-saving storage, the thermometer features a built-in magnet.

• Attach the thermometer to a metallic surface, such as a refrigerator door or oven hood.
• Store the sensor holder with the thermometer when not in use.

Image 5.1: Thermometer dimensions, IPX2 waterproof rating, and magnetic storage feature.

5.3 Udskiftning af batteri

When the display becomes dim or the thermometer stops functioning, replace the CR2032 battery following the instructions in Section 3.1.

6. Fejlfinding

• Intet display / Mørkt display: Check battery installation. Replace the CR2032 battery if necessary.
• Upræcise læsninger: Ensure the sensor probe is fully inserted into the substance being measured. Avoid measuring near strong electromagnetic fields.
• Thermometer Does Not Turn On: Verify battery is correctly installed and has sufficient charge.

Hvis problemerne fortsætter efter at have forsøgt disse trin, bedes du kontakte kundesupport.

7. Specifikationer

8. Garanti og support

For warranty information or technical support, please refer to the official Tanita webwebstedet eller kontakt din lokale forhandler. Gem din købskvittering som købsbevis.

For yderligere produktinformation kan du besøge Tanita Brand Store.