1. Introduktion
Thank you for choosing the Klarstein Kronleuchter Island Extractor Hood. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.
1.1 Vigtige sikkerhedsinstruktioner
- Sørg for, at strømforsyningen voltage stemmer overens med typeskiltet på apparatet.
- Installationen skal udføres af en kvalificeret tekniker i overensstemmelse med lokale regler.
- Afbryd altid apparatet fra strømforsyningen før rengøring eller vedligeholdelse.
- Der må ikke flamberes under emhætten.
- Apparatet er kun til husholdningsbrug.
- Hold børn væk fra apparatet under brug og rengøring.
2. Produktet er slutview
The Klarstein Kronleuchter is an island extractor hood designed for ceiling mounting above freestanding cooktops. It features a recirculation system to effectively remove cooking odors and steam from your kitchen.
Figur 1: Forside view of the Klarstein Kronleuchter Island Extractor Hood.
2.1 Nøglefunktioner
- Island Design: Ceiling-mounted for freestanding cooktops.
- Energieffektivitet: Rated Class A for economical operation.
- Luftrensning: Washable aluminum grease filter and optional activated carbon filters for odor removal.
- Pladsbesparende: Floating installation above the stove for comfortable cooking.
- SenseControl: Easy operation via an LED touch panel.
- Integreret belysning: Two 1.5 Watt LED lights provide illumination for the cooking area.
- Æstetisk design: Front and back made of white safety glass, with brushed stainless steel sides.
- Præstation: 60 cm wide with 165 Watt motor power and 3 selectable circulation modes.
2.2 Inkluderede komponenter
- 1 x Extractor Hood Unit
- 1 x Ceiling Plate
- Mounting Material (screws and dowels)
- 1 x Grease Filter (pre-installed)
3. Opsætning og installation
This section provides general guidance for installing your extractor hood. For detailed, step-by-step instructions and safety warnings, please refer to the separate installation guide provided with your product.
3.1 Kontrol før installation
- Verify that the ceiling structure can support the weight of the hood (approximately 17 kg / 37.2 lbs).
- Ensure a suitable electrical outlet (220-240 V~ | 50/60 Hz) is available near the installation point.
- Confirm the hood is intended for recirculation mode only; it cannot be converted to a drainage system.
3.2 Montering af emhætten
The hood is designed for ceiling mounting. The ceiling plate provides the anchor point, from which the hood is suspended. The height is adjustable up to a maximum of 60 cm from the ceiling plate to the top of the hood body.
Figure 2: Product dimensions. The hood measures approximately 60 x 35 x 35 cm (WxHxD).
Figure 3: The Klarstein Kronleuchter island extractor hood installed above a freestanding cooktop in a modern kitchen.
3.3 Elektrisk tilslutning
Connect the power cable from the hood to the electrical outlet. Ensure the connection is secure and complies with all electrical safety standards.
4. Betjening
The Klarstein Kronleuchter extractor hood is operated via an intuitive LED touch panel located on the front of the unit.
Figure 4: The SenseControl LED touch panel for easy operation.
4.1 Kontrolpanel
The touch panel allows you to power the unit on/off, adjust fan speed, and control the lighting. Red indicator LEDs show the currently selected power level.
4.2 Valg af ventilatorhastighed
The hood offers three selectable circulation modes (fan speeds) to suit different cooking needs. Press the corresponding touch button to cycle through the speeds:
- Hastighed 1: Low power for light cooking or maintaining air quality.
- Hastighed 2: Mellem effekt til generel madlavning.
- Hastighed 3: High power for intense cooking or strong odors.
4.3 Lysstyring
The integrated LED stove lighting (2 x 1.5 Watt) can be switched on or off independently of the fan operation. This provides clear illumination of your cooking surface.
Figure 5: Integrated LED lighting illuminates the cooking area.
5. Vedligeholdelse
Regular maintenance ensures optimal performance and extends the lifespan of your extractor hood. Always disconnect the appliance from the power supply before performing any cleaning or maintenance tasks.
5.1 Rengøring af ydersiden
Wipe the exterior surfaces (safety glass and stainless steel) with a soft cloth dampened with mild detergent. Do not use abrasive cleaners or harsh chemicals, as these can damage the finish.
5.2 Cleaning the Grease Filter
The aluminum grease filter should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain effective grease removal. The filter is washable.
- Carefully remove the grease filter from the hood.
- Wash the filter by hand in hot soapy water or in a dishwasher on a low-temperature cycle.
- Allow the filter to dry completely before re-installing it.
Figure 6: The washable aluminum grease filter.
5.3 Replacing Activated Carbon Filters (Optional)
If you are using optional activated carbon filters for odor filtration, these cannot be washed and must be replaced periodically (typically every 3-6 months, depending on usage). Matching replacement activated carbon filters can be found under article number 10030983.
6. Fejlfinding
Before contacting customer support, please consult the following table for common issues and their potential solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Hood not operating | Ingen strømforsyning | Check if the appliance is plugged in and the circuit breaker is on. |
| Lav sugeevne | Grease filter clogged | Rengør eller udskift fedtfilteret. |
| Activated carbon filter saturated (if installed) | Udskift det aktive kulfilter. | |
| Lys virker ikke | LEDs faulty | Kontakt kundesupport for udskiftning. |
| Overdreven støj | Loose components or improper installation | Ensure all mounting screws are tightened. Check for any obstructions in the fan. |
7. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | CGCH2-90200-KronLW (Internal: f0fa2cda-d6b4-4d64-bb7d-b1b26d1e9ab0) |
| Mærke | KLARSTEIN |
| Monteringstype | Island Mount (Ceiling) |
| Ventilationstype | Recirkulation |
| Dimensioner (BxHxD) | Ca. 60 x 35 x 35 cm (23.62" x 13.78" x 13.78") |
| Varens vægt | Ca. 16.9 kg (37.2 lbs) |
| Materiale | Stainless Steel, Aluminum, Safety Glass |
| Farve | Hvid |
| Luftmængde kapacitet | 250 kubikmeter i timen |
| Antal hastigheder | 3 |
| Støjniveau | 58 decibel |
| Kontroltype | Touch (LED Panel) |
| Belysning | 2 x 1.5 Watt LED (Light Efficiency Class A) |
| Filtertype | Mesh (Aluminum Grease Filter) |
| Strømkrav | 220-240 V~ | 50/60 Hz |
| Wattage | 175 watt |
| Energieffektivitetsklasse | A |
Figure 7: Energy efficiency label for the Klarstein Kronleuchter hood.
8. Garanti og kundesupport
Your Klarstein Kronleuchter Island Extractor Hood comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact Klarstein customer support. Contact details can typically be found on the Klarstein webwebstedet eller i din købsdokumentation.
Please have your model number (CGCH2-90200-KronLW) and purchase date ready when contacting support.
