Brugermanual til Cisco-kameramontering

Model: 5080963

For Cisco Webex Room Kit Mini og Webex Rum USB

1. Introduktion

This manual provides detailed instructions for the installation, use, and maintenance of the Cisco Camera Mount, designed specifically for the Cisco Webex Room Kit Mini og Webex Room USB systems. This mount ensures optimal placement of your video conferencing camera, providing a clear line of sight for participants.

Please read this manual thoroughly before installation to ensure proper setup and to maximize the performance and longevity of your camera mount.

2. Sikkerhedsoplysninger

Sørg for, at alle komponenter er forsvarligt fastgjort under installationen for at forhindre utilsigtet forskydning.
Do not attempt to modify the mount. Unauthorized modifications may compromise its structural integrity and void the warranty.
Hold små dele og emballagematerialer væk fra børn for at forhindre kvælningsfare.
If any part is damaged or missing, do not proceed with installation. Contact Cisco support for replacement parts.

3. Pakkens indhold

Bekræft, at alle følgende komponenter er inkluderet i din pakke:

Cisco Camera Mount components including two black metal bars, several black circular spacers, and various screws.

Image: All components of the Cisco Camera Mount. This includes two primary black metal mounting bars, one longer and one shorter, both with multiple screw holes. Also visible are eight black circular spacers and various black screws of different lengths, along with four small brass-threaded nuts.

Main Mounting Bar (Long)
Secondary Mounting Bar (Short)
Afstandsstykker (8 stk.)
Various Screws (for assembly and attachment)
Nødder (4 stk.)
Installationsvejledning (dette dokument)

4. Opsætning og installation

The Cisco Camera Mount is designed for over-display placement to ensure an optimal line of sight for video conferencing. Follow these steps for proper installation:

Prepare the Display: Ensure your display is securely mounted and accessible for installation. The mount is designed to sit on top of the display.
Attach the Main Mounting Bar: Position the longer main mounting bar on top of your display. Align the holes with the mounting points on your Cisco Webex Room Kit Mini or Webex Room USB system.
Secure the Camera System: Using the provided screws and spacers, attach your Cisco Webex Room Kit Mini or Webex Room USB system to the main mounting bar. Ensure the camera is facing forward and is level.
Attach the Secondary Mounting Bar (if applicable): Depending on your specific setup and the model of your Webex system, you may need to use the shorter secondary mounting bar for additional support or specific camera configurations. Refer to your Webex system's manual for precise attachment points.
Endelige justeringer: Once the camera system is securely mounted, make any necessary minor adjustments to ensure stability and optimal camera angle.
Kabelstyring: Route any necessary cables (power, HDMI, USB) neatly to avoid interference and maintain a clean setup.

Note: All necessary hardware for installation is included with the mount. For detailed instructions on attaching the Webex Room Kit Mini or Webex Room USB to the mount, refer to the specific documentation provided with your Cisco Webex system.

5. Vedligeholdelse

The Cisco Camera Mount requires minimal maintenance. Follow these guidelines to ensure its longevity:

Rensning: Use a soft, dry cloth to wipe down the mount. Avoid abrasive cleaners or solvents, as they may damage the finish.
Periodisk eftersyn: Periodically check all screws and connections to ensure they remain tight and secure. Tighten any loose fasteners as needed.
Opbevaring: If the mount is removed for storage, keep all components together in a dry, safe place to prevent loss or damage.

6. Fejlfinding

This section addresses common issues you might encounter with the camera mount.

Problem	Mulig årsag	Løsning
Beslaget føles ustabilt eller vakkelvornt.	Loose screws or improper attachment.	Ensure all screws are tightened securely. Re-check alignment with the display and camera system.
Camera not level after mounting.	Uneven placement or display surface.	Adjust the mount's position on the display. Ensure the display surface is flat. Use shims if necessary (not included).
Manglende komponenter.	Emballagefejl.	Refer to the "Package Contents" section. If components are missing, contact Cisco support immediately.

If you encounter issues not listed here, or if the suggested solutions do not resolve the problem, please contact Cisco technical support.

7. Specifikationer

Feature	Detalje
Mærke	Cisco
Modelnummer	5080963
Kompatible enheder	Cisco Webex Room Kit Mini, Cisco Webex Rum USB
Monteringshardware	CS-KIT-MINI-SMK=
Produktdimensioner	44 x 12.2 x 3.79 cm (17.32 x 4.80 x 1.49 tommer)
Varens vægt	940 g (2.07 lbs)
Farve	Sort
Materiale	Metal (as implied by product image and type)

8. Garanti og support

Garantioplysninger

This Cisco Camera Mount comes with a 90 dages begrænset hardwaregaranti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriseret ændring eller forkert installation.

For full details regarding the warranty terms and conditions, please refer to the official Cisco warranty documentation or visit the Cisco support webwebsted.

Kundesupport

If you require technical assistance, have questions about your product, or need to report a warranty claim, please contact Cisco customer support. You can find contact information and additional resources on the official Cisco webwebsted:

www.cisco.com/go/support

Hav venligst dit produktmodelnummer (5080963) og købsbevis klar, når du kontakter support.

	Cisco RoomOS 11 API Reference Guide for Collaboration Devices This API Reference Guide for Cisco RoomOS 11.27 details the Application Programming Interface for Cisco collaboration devices. It is essential for developers and integrators, covering xConfiguration, xCommand, xStatus, and events, with support for various connection methods and device models like Board, Desk, and Room Series.
	Cisco Touch Controller Quick Reference Guide for Webex Room Devices A quick reference guide for using the Cisco Touch Controller with Webex Enabled Room Devices, covering placing calls, sharing content, using the Webex app as a remote, and managing meeting settings.
	Cisco WebGuide til implementering af ex-enheder En omfattende guide fra Cisco om implementering Webex Room-enheder, der dækker implementeringsscenarier, netværksberedskab, migrering, vedligeholdelse, overvågning, telefoniaktivering og en implementeringstjekliste.
	Cisco Webex Room Kit Plus Installationsvejledning This guide provides comprehensive instructions for installing the Cisco Webex Room Kit Plus, including the Quad Camera and Codec Plus. It covers unboxing, mounting, cable connections, and initial software setup for video conferencing.
	Cisco USB Passthrough Version 2 Setup Guide: Video System Configuration Step-by-step instructions for configuring Cisco video endpoints for USB Passthrough Version 2, including manual web interface settings for optimal performance with capture devices and INOGENI 4KX-PLUS.
	Cisco Webex Room Navigator Software Compatibility and Upgrade Guide This guide provides essential information on software compatibility for the Cisco Webex Room Navigator, detailing upgrade procedures for both on-premises and Webex cloud environments, and lists all supported Cisco video conferencing devices.

cisco 5080963