1. Produktet er slutview
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Calvas Fetcus replacement remote control for Panasonic air conditioners. This remote is designed to provide seamless control over your compatible air conditioning unit, offering functions such as power, mode selection, temperature adjustment, fan speed control, and timer settings.
Figur 1: Forside view of the Calvas Fetcus remote control.
2. Opsætning
2.1. Batteriinstallation
The remote control requires batteries for operation. Please follow these steps to install or replace the batteries:
- Find batterirummets dæksel på bagsiden af fjernbetjeningen.
- Skub dækslet nedad, eller tryk på låsen (hvis den er monteret) for at åbne rummet.
- Insert two new batteries of the appropriate type (e.g., AAA or AA, please check markings inside the compartment) into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside.
- Luk batteridækslet ved at skubbe det tilbage på plads, indtil det klikker sikkert.
Figur 2: Batterirum på bagsiden af fjernbetjeningen.
2.2. Førstegangsbrug
Once batteries are installed, the remote control is ready for use. No programming is typically required for this replacement remote, as it is pre-programmed for compatible Panasonic air conditioner models. Simply point the remote control towards the air conditioner's receiver and press the desired function button.
3. Betjeningsvejledning
Gør dig bekendt med knapperne og deres funktioner for optimal styring af dit klimaanlæg.
Figur 3: Detaljeret view af fjernbetjeningens knapper.
3.1. Knapfunktioner
- ON/OFF knap: Tænder eller slukker klimaanlægget.
- MODE knap: Skifter mellem driftstilstande som Køling, Varme, Ventilator, Tørring og Auto.
- TEMP ▲/▼ knapper: Justerer den ønskede temperaturindstilling op eller ned.
- FAN SPEED knap: Ændrer ventilatorhastigheden (f.eks. Lav, Mellem, Høj, Auto).
- LUFTSVINGNINGSknap: Styrer den vertikale bevægelse af lamellen for luftretning.
- TIMER knap: Initiates or adjusts the timer settings for scheduled operation.
- AUTO knap: Activates the automatic operating mode, where the unit selects the best mode and fan speed based on room temperature.
- Genstarts knap: Resets the remote control settings (usually a small recessed button requiring a pointed object).
3.2. Grundlæggende betjening
- Tænd/sluk: Tryk på ON/OFF knappen én gang for at tænde enheden, og igen for at slukke den.
- Valg af tilstand: Tryk på MODE button repeatedly until the desired operating mode (e.g., Cool, Heat) is displayed on the remote's screen.
- Justering af temperatur: Brug TEMP ▲ or TEMP ▼ buttons to set your preferred temperature.
- Indstilling af ventilatorhastighed: Tryk på BLÆSERHASTIGHED button to cycle through available fan speeds.
4. Vedligeholdelse
4.1. Udskiftning af batteri
Replace batteries when the remote control's display becomes dim or when the remote no longer responds to button presses. Refer to Section 2.1 for detailed battery installation instructions. Always replace both batteries at the same time with new ones of the appropriate type.
4.2. Rensning
For at rengøre fjernbetjeningen skal du forsigtigt tørre dens overflade af med en blød, tør klud. Ved genstridigt snavs kan du bruge en let tør klud.amp cloth can be used, followed immediately by a dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water, as this can damage the electronic components.
4.3. Opbevaring
If the remote control will not be used for an extended period, it is recommended to remove the batteries to prevent leakage and potential damage to the remote. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fjernbetjening virker ikke. | Døde eller forkert installerede batterier. | Udskift batterierne, og sørg for at polariteten (+/-) vender korrekt. |
| Fjernbetjeningens rækkevidde er dårlig. | Weak batteries; Obstruction between remote and AC unit; Remote not pointed directly at AC unit. | Replace batteries; Remove obstructions; Ensure direct line of sight to AC unit's receiver. |
| Klimaanlægget reagerer ikke på kommandoer. | Remote control not compatible with AC unit; AC unit is off or unplugged; AC unit's receiver is faulty. | Verify compatibility with your specific Panasonic AC model; Check AC unit's power supply; Consult AC unit's manual or service technician. |
| Fjernbetjeningens display er svagt eller tomt. | Lav batteristrøm. | Udskift batterierne. |
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Calvas |
| Modelnummer | CLS-D41D8CD98F00B204E9800998ECF8427E |
| Kompatible enheder | Panasonic Air Conditioners (CS-E9CKP, CS-E15CKP, CWA75C258, CWA75C377, CWA75C376) |
| Forbindelsesteknologi | Infrarød (IR) |
| Trådløs kommunikation | IR |
| Frekvens | 433 MHz |
| Kanal | 1 |
| Maks. antal understøttede enheder | 1 |
| Varens vægt | 99.8 g (ca.) |
| Materiale | Andre |
| Vare Pakke Antal | 1 |
| Særlige funktioner | Infrared, Universal, Wireless |
| Batteribeskrivelse | Lithium (Note: Typically uses AAA/AA. Please check remote's battery compartment for specific type.) |
7. Garantioplysninger
Dette produkt leveres med en 90 dages garanti from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please contact your retailer or the manufacturer.
8. Support
For further assistance, troubleshooting not covered in this manual, or inquiries regarding your Calvas Fetcus remote control, please contact the seller or the manufacturer directly. Refer to your purchase documentation for contact details. You may also visit the product page on Amazon.ca for additional information or customer service options.
Produktlink: https://www.amazon.ca/Calvas-RemoteControl-Panasonic-CS-E15CKP-Conditioner/dp/B07R6X7KZL
