En for alle WM7471

One For All WM7471 Universal TV Tripod Stand Brugsanvisning

Model: WM7471

1. Introduktion

This manual provides detailed instructions for the assembly, operation, and maintenance of your One For All WM7471 Universal TV Tripod Stand. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to securely hold televisions ranging from 32 to 65 inches with VESA mounting patterns between 200x100mm and 400x400mm.

2. Sikkerhedsoplysninger

ADVARSEL: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you have any questions, please contact customer support.

  • Sørg for, at alle komponenter er til stede og ubeskadigede før montering. Brug ikke beskadigede dele.
  • Overskrid ikke den maksimale vægtkapacitet eller skærmstørrelse, der er angivet i specifikationsafsnittet.
  • Always assemble the stand on a flat, stable surface.
  • Ensure the TV is securely attached to the mounting brackets and the stand is stable before releasinfjernsynet.
  • Hold børn og kæledyr væk under montering. Små dele kan være en kvælningsfare.
  • Do not attempt to modify the stand.
  • Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre.

3. Pakkens indhold

Verify that all parts listed below are included in your package. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

  • Tripod Base Assembly (Wooden legs, central column)
  • TV Mounting Brackets (Horizontal bars)
  • Vertical Support Bar
  • Cable Management Strap (Leather)
  • Universal Soundbar Attachment
  • Hardware Kit (Screws, washers, spacers for TV mounting)
  • Instruktionsmanual (dette dokument)
One For All WM7471 Universal TV Tripod Stand components
Figur 1: Overview of the One For All WM7471 Universal TV Tripod Stand components. This image shows the main parts including the tripod base, central column, and TV mounting brackets.

4. Opsætning og montering

Follow these steps carefully to assemble your TV tripod stand. It is recommended to have a second person assist with mounting the television.

  1. Saml stativbasen:

    Carefully attach the three wooden legs to the central column. Ensure they are securely fastened according to the provided diagrams in the separate assembly guide (if applicable). The design allows for tool-free or minimal tool assembly.

    Close-up of the One For All logo on the central column where the legs connect
    Figure 2: Detail of the central connection point of the tripod stand, showing the secure attachment of the wooden legs to the main column.
  2. Fastgør TV-monteringsbeslag til TV'et:

    Identify the VESA mounting holes on the back of your television. Select the appropriate screws, washers, and spacers from the hardware kit that match your TV's specifications. Attach the horizontal TV mounting brackets to the back of your TV. Ensure they are level and securely tightened.

    Close-up of the VESA mounting bar with various hole patterns
    Figure 3: The VESA mounting bar, illustrating the multiple hole patterns for compatibility with various TV models.
  3. Monter TV på stativ:

    With assistance, carefully lift the television and hook the attached mounting brackets onto the vertical support bar of the tripod stand. Ensure the TV is centered and level. Secure the TV to the stand using the provided safety mechanisms, such as locking screws or clips, to prevent accidental dislodgement.

    Close-up of the TV mounting bracket attached to the central column with cable management
    Figur 4: En detaljeret view of the TV mounting bracket securely fastened to the stand's central column, also showing the integrated cable management clip.
  4. Kabelstyring:

    Utilize the integrated cable management strap and clips to route and conceal TV and accessory cables along the central column and down one of the legs. This helps maintain a tidy appearance and prevents tripping hazards.

    Close-up of a cable being routed along a wooden leg of the tripod stand
    Figur 5: Et example of cable management, showing a cable neatly routed along one of the wooden tripod legs.
  5. Soundbar Attachment (Optional):

    If using a soundbar, attach the universal soundbar attachment to the TV mounting brackets as per its specific instructions. This allows the soundbar to move with the TV when adjusted.

5. Betjeningsvejledning (Justeringer)

The One For All WM7471 stand offers flexibility in TV positioning.

  • Højdejustering:

    The TV can be adjusted vertically along the central column. Loosen the height adjustment mechanism (refer to the assembly guide for specific details), slide the TV to the desired height, and then securely tighten the mechanism. Always ensure the TV is level after adjustment.

  • 360° drejning:

    The entire TV and mounting assembly can be rotated 360 degrees around the central column. Gently rotate the TV to achieve the optimal viewing angle. Ensure no cables are snagged or strained during rotation.

    Side view of the TV tripod stand with a television mounted, showing its slim profile
    Figur 6: Sideprofile of the stand with a TV, demonstrating the potential for swivel and height adjustments.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din TV-messes levetid og sikre drift.

  • Rensning: Brug en blød, tør klud til at tørre stativet af. Ved genstridige mærker, brug en let tør klud.amp en klud med mild sæbe kan bruges, efterfulgt af øjeblikkelig tørring. Undgå slibende rengøringsmidler eller opløsningsmidler.
  • Inspektioner: Periodically check all screws, bolts, and connections for tightness. Re-tighten if necessary.
  • Kabelstyring: Ensure cables remain neatly organized and are not pinched or strained.

7. Fejlfinding

If you encounter issues with your TV stand, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Stativet føles ustabilt.Loose connections; uneven floor; TV too heavy/large.Ensure all screws are tightened. Move stand to a level surface. Verify TV weight and size are within specifications.
TV'et er ikke i vater.Mounting brackets unevenly attached; stand not level.Re-adjust TV mounting brackets. Ensure stand is on a level surface.
Vanskeligheder med at justere højden eller drejefunktionen.Adjustment mechanism is too tight or obstructed.Loosen adjustment mechanism slightly. Check for cable obstructions. Do not force movement.

If the problem persists, please contact One For All customer support.

8. Specifikationer

FeatureDetalje
ModelnummerWM7471
MærkeEn for alle
Kompatible skærmstørrelser32-65 tommer
VESA-kompatibilitet200x100mm til 400x400mm
Bevægelsestype360° Swivel, Height Adjustable
MaterialeWood (Walnut), Metal (Gunmetal/Chrome)
FarveWalnut & Gunmetal
Inkluderede komponenterTripod stand, TV mounting hardware, cable management strap, universal soundbar attachment

9. Garanti og support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official One For All webwebsted. Specifikke garantivilkår kan variere afhængigt af region og forhandler.

Fabrikant: En for alle

Oprindelsesland: Kina

Relaterede dokumenter - WM7471

Preview One For All universal stativ til TV-bord WM7461/7462 hurtig installationsvejledning
This document provides a quick installation guide for the One For All Universal Tripod TV Stand, models WM7461 and WM7462. It details product specifications, a list of included parts, step-by-step assembly instructions, safety disclaimers, and warranty information.
Preview One For All Universal Quadpod TV-stander WM7475/WM7476 Hurtig installationsvejledning
Comprehensive installation guide for the One For All Universal Quadpod TV Stand (models WM7475 and WM7476). Includes a detailed parts list, step-by-step assembly instructions, safety warnings, VESA compatibility information, and product specifications.
Preview One For All Falcon TV-bordmanual (WM7481/WM7482)
Omfattende manual til One For All Falcon TV-bordet, der understøtter TV'er fra 32" til 70". Det fås i valnød/gunmetal og eg/sølv, har et integreret TV-beslag og inkluderer et vigtigt anti-tip-sæt for sikkerhed.
Preview ONE FOR ALL URC-1625 Universal fjernbetjening Brugsanvisning
Omfattende brugsanvisning til ONE FOR ALL URC-1625 universalfjernbetjeningen. Lær, hvordan du konfigurerer din fjernbetjening til tv, satellitmodtagere, kabelkonvertere og andre AV-enheder, foretager fejlfinding af almindelige problemer og får adgang til avancerede funktioner.
Preview One For All DM2110/DM2120 Smart Monitorarm: Hurtig installationsvejledning
Detaljeret hurtig installationsvejledning til One For All DM2110 og DM2120 smart monitorarme. Lær, hvordan du monterer din skærm sikkert og nemt, forstå garantibetingelser og find produktspecifikationer.
Preview Brugervejledning til One For All URC-9910 universalfjernbetjening
Denne brugervejledning indeholder omfattende instruktioner til One For All IR/RF LCD 8-enheds universalfjernbetjening med indlæringsfunktion (URC-9910). Lær, hvordan du programmerer, konfigurerer og bruger dens funktioner til at styre flere hjemmeunderholdningsenheder, konsolidere fjernbetjeninger og forbedre din hjemmebiografoplevelse.