Sporbar kalibreret termohygrometer med RS-232 brugsanvisning

1. Introduktion

This manual provides detailed instructions for the proper use and maintenance of your Traceable Calibrated Thermohygrometer with RS-232. This device is designed for accurate measurement of temperature and humidity, featuring microprocessor-based technology for easy calibration and an RS-232 output for data communication. For optimal performance and longevity, please read these instructions thoroughly before operation.

Image 1: The Traceable Calibrated Thermohygrometer. The device features a digital display showing humidity and temperature, with several control buttons below. A probe is connected via a coiled cable.

2. Funktioner

• Accurately measures temperature and relative humidity.
• Includes a NIST-Traceable certificate from an A2LA accredited calibration laboratory (1750.01), ensuring measurement accuracy.
• Microprocessor-based design facilitates quick and straightforward calibration procedures.
• Equipped with RS-232 output for data transmission to compatible systems.

3. Hvad er der i æsken

Upon unpacking, verify that the following items are present:

• Traceable Calibrated Thermohygrometer unit
• Humidity/Temperature Probe
• NIST-Traceable Calibration Certificate
• Instruktionsmanual

4. Opsætning

1. Batteri installation: Open the battery compartment (typically on the back of the unit) and insert the required batteries, observing correct polarity.
2. Probeforbindelse: Connect the humidity/temperature probe to the designated port on the main unit. Ensure a secure connection.
3. Første gang tændt: Tryk på ON button to power on the device. The display should illuminate and show initial readings.
4. Unit Selection (if applicable): If your model allows, select your preferred temperature unit (Celsius or Fahrenheit) using the ° C / ° F knap.
5. Placering: Position the thermohygrometer in the environment where measurements are required. Ensure the probe is exposed to the air and not obstructed.

5. Betjeningsvejledning

5.1 Grundlæggende betjening

• Tænd/sluk: Tryk på ON button to turn the unit on. Press the SLUKKET knappen for at slukke den.
• Læsedisplay: The display will show current relative humidity (RH%) and temperature (°C/°F).
• Temperaturenhed: Toggle between Celsius (°C) and Fahrenheit (°F) by pressing the ° C / ° F knap.
• Data Hold: Tryk på HOLDE button to freeze the current readings on the display. Press again to release.
• Minimum/Maximum Readings: Tryk på MIN / MAX knap til view the minimum and maximum temperature and humidity readings recorded since the last reset. Press repeatedly to cycle through MIN, MAX, and current readings.
• Reset MIN/MAX: Mens viewing MIN/MAX readings, press the NULSTIL button to clear the stored minimum and maximum values.

5.2 RS-232 Output

The device is equipped with an RS-232 port for connecting to a computer or data logger. This allows for real-time data acquisition and analysis. Refer to the specific software or interface instructions for your data collection system for details on establishing communication and data transfer protocols.

Image 2: A hand in a blue glove interacting with a Traceable device, demonstrating typical laboratory use. This image illustrates the practical application of Traceable instruments in a controlled environment.

6. Vedligeholdelse

• Rensning: Wipe the unit and probe with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af batteri: Replace batteries when the low battery indicator appears on the display. Ensure proper battery type and polarity.
• Opbevaring: When not in use for extended periods, remove the batteries and store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Genkalibrering: Due to the nature of humidity sensors, periodic recalibration is recommended to maintain accuracy. Refer to the NIST-Traceable certificate for recommended recalibration intervals.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please contact the manufacturer, Cole-Parmer, or your authorized distributor. Keep your purchase receipt and NIST-Traceable certificate for reference.

Fabrikant: COLE-PARMER

Mærke: SPORBAR

For yderligere hjælp, besøg Traceable Brand Store on Amazon.