Indledning
This manual provides essential information for the installation, operation, and maintenance of your GROHE Defined 29 302 Floor Mounted Tub Filler with Built-In Diverter and Hand Shower. Please read these instructions carefully before installation and retain them for future reference. Proper installation and maintenance will ensure optimal performance and longevity of your product.
Sikkerhedsoplysninger
- Sluk altid for hovedvandforsyningen, inden du påbegynder installations- eller vedligeholdelsesarbejde.
- Sørg for, at alle VVS-forbindelser er sikre for at forhindre lækager.
- Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret professionel VVS-installatør.
- Protect the product's finish from harsh chemicals and abrasive cleaning materials.
Opsætning og installation
The GROHE Defined 29 302 Floor Mounted Tub Filler requires a separate rough-in set for installation. Refer to the specific installation instructions provided with your rough-in kit for detailed steps on preparing the floor and water connections. This section focuses on the final assembly of the visible tub filler components.
Required Tools (General)
- Justerbar skruenøgle
- Skruetrækker (Phillips/Fladhoved efter behov)
- Plumber's tape
- Blød klud
Installationstrin (Overview)
- Ensure the rough-in body is securely installed and water connections are ready according to its specific instructions.
- Attach the tub filler body to the rough-in, ensuring all seals are correctly seated.
- Secure the tub filler to the floor using the provided mounting hardware.
- Connect the hand shower hose to the designated outlet on the tub filler body.
- Install the hand shower into its holder.
- Tænd forsigtigt for vandforsyningen, og kontroller for eventuelle lækager.
Billede 1: The GROHE Defined Floor Mounted Tub Filler with its integrated hand shower, showcasing the Starlight Chrome finish.
Billede 2: Technical drawing illustrating the key dimensions of the tub filler, including height, spout reach, and clearance.
Betjeningsvejledning
Tub Filler Operation
- Tænd/sluk: Lift the single lever handle to turn on the water flow. Push down to turn off.
- Temperaturkontrol: Rotate the lever handle left for hotter water and right for colder water.
- Flow kontrol: Adjust the height of the lever to control the water volume.
Hand Shower and Diverter Operation
- Activating Hand Shower: Pull the diverter knob located on the tub filler body to switch water flow from the tub spout to the hand shower.
- Returning to Tub Spout: Push the diverter knob back in to direct water flow to the tub spout.
- Using Hand Shower: Remove the hand shower from its holder and direct the spray as desired.
This product features GROHE EcoJoy technology, designed to deliver a perfect flow while reducing water consumption.
Vedligeholdelse og rengøring
To maintain the pristine appearance and functionality of your GROHE tub filler, follow these cleaning and maintenance guidelines:
- Rengøring af finishen: Clean the Starlight Chrome finish with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome fixtures.
- Undgå skrappe rengøringsmidler: Brug ikke slibende svampe, skuresvampe eller rengøringsmidler, der indeholder alkohol, ammoniak, blegemiddel eller fosforsyre, da disse kan beskadige overfladen.
- SilkMove Cartridge: The GROHE SilkMove cartridge ensures smooth and precise operation of the lever. No special maintenance is typically required for the cartridge itself.
- Håndbrusedyser: Periodically clean the nozzles of the hand shower to remove any mineral buildup. Many GROHE hand showers feature flexible silicone nozzles that can be easily wiped clean.
Billede 3: Visual representation of GROHE technologies: Starlight Chrome finish, SilkMove for smooth operation, and EcoJoy for water efficiency.
Fejlfinding
If you encounter issues with your tub filler, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lav vandgennemstrømning | Partially closed shut-off valves, clogged aerator/nozzles, or debris in water lines. | Ensure shut-off valves are fully open. Clean hand shower nozzles. Flush water lines if necessary. |
| Lækager fra forbindelser | Løse forbindelser, beskadigede O-ringe eller pakninger. | Tighten connections. Inspect and replace O-rings or seals if damaged. |
| Diverter not switching flow | Debris in diverter mechanism or worn diverter. | Flush the system. If problem persists, contact customer support. |
| Problemer med vandtemperaturen | Incorrect hot/cold supply connections or issues with water heater. | Verify hot and cold supply lines are correctly connected. Check water heater settings. |
If these solutions do not resolve the issue, please contact GROHE customer support or a qualified plumber.
Specifikationer
- Modelnummer: 29 302
- Mærke: GROHE
- Udfør type: Starlight Krom
- Materiale: Metal
- Antal håndtag: 1
- Monteringstype: Gulvmontering
- Samlet højde: Approximately 37-1/2 inches (from bottom to top of faucet)
- Tudhøjde: Approximately 32-3/8 inches (deck to spout outlet)
- Udløbsrækkevidde: Approximately 11-9/16 inches (center of faucet body to center of spout outlet horizontally)
- Hand Shower Flow Rate: 1.75 gallons-per-minute (GPM)
- Tub Filler Flow Rate: 6 gallons-per-minute (GPM)
- Hand Shower Hose Length: 49 tommer
- Faucet Holes Required: 1 (minimum)
- Varens vægt: Cirka 16.9 pund
Garantioplysninger
GROHE products are manufactured to the highest quality standards and are backed by a manufacturer's warranty. For detailed information regarding the specific warranty terms and conditions applicable to your GROHE Defined 29 302 Floor Mounted Tub Filler, please refer to the official warranty documentation provided with your purchase or visit the official GROHE webwebsted.
Kundesupport
If you require further assistance, have questions about installation, operation, or need to report a product issue, please contact GROHE customer service. Contact information can typically be found on the GROHE webstedet eller i emballagematerialerne.
GROHE Webwebsted: www.grohe.us
