Qlima PGWH 1010 Bærbar Gasvandvarmer og Udendørs Bruser Brugermanual

1. Introduktion

Thank you for choosing the Qlima PGWH 1010 Portable Gas Water Heater and Outdoor Shower. This device is designed to provide instant hot water for various outdoor activities such as camping, washing vehicles, or bathing pets. Its portable and compact design ensures convenience and ease of use. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.

2. Sikkerhedsinstruktioner

Your safety is paramount. Always follow these instructions to prevent injury or damage.

2.1 Generel sikkerhed

• Læs alle instruktioner, inden du betjener apparatet.
• Hold børn og kæledyr væk fra apparatet under drift.
• Use the appliance only in well-ventilated outdoor areas. Never use indoors or in enclosed spaces.
• Do not modify the appliance or use non-original parts.
• Ensure the appliance is stable and securely hung during use.

2.2 Gassikkerhed

• Use only the specified gas type (G30-butane / propane / LPG) and recommended gas pressure (28-30-37 mbar).
• Always check for gas leaks using soapy water at all connections before each use. Never use an open flame.
• Ensure gas cylinders are stored upright and away from heat sources.
• Disconnect the gas supply when the appliance is not in use or during maintenance.

2.3 Vandsikkerhed

• Ensure adequate water pressure (between 0.2 and 10 bar) for proper operation.
• Do not operate the unit without water flowing through it (dry-run protection is included, but it's best to avoid).
• Drain all water from the unit before storing or in freezing conditions to prevent damage.
• The maximum water temperature can reach 70°C. Exercise caution to avoid scalding.

3. Produktet er slutview

The Qlima PGWH 1010 is a compact and portable water heater designed for outdoor use. It features a durable white casing with integrated controls and connections.

Figur 1: Forside view of the Qlima PGWH 1010 unit with attached shower head and hose.

3.1 Komponenter

• Hovedenhed: The central heating component.
• Integreret håndtag: For easy carrying and hanging.
• Shower Head with Hose: For water delivery.
• Gasindtag: Tilslutningspunkt for gasslangen.
• Vandindtag: Connection point for the cold water supply hose.
• Vandudløb: Connection point for the shower hose.
• Removable Drain Valve: Placeret i bunden til dræning af vand.

3.2 Betjeningselementer og display

Figur 2: Nærbillede af kontrolpanelet.

• Gas Flow Control Knob (Left): Adjusts the gas supply to the burner, influencing the heat output. Marked with flame icons (Min to Max).
• Water Flow Control Knob (Right): Adjusts the water flow rate through the unit. Marked with water droplet icons (Max to Min).
• LED display: Viser den aktuelle vandtemperatur.

4. Opsætning

Follow these steps to set up your Qlima PGWH 1010 for first use.

4.1 Placering

• Hang the unit securely using its integrated handle in a well-ventilated outdoor area. Ensure it is stable and cannot fall.
• Keep the unit away from flammable materials and ensure adequate clearance around it.

4.2 Gastilslutning

• Connect the gas supply hose to the gas inlet on the bottom of the unit. Tighten securely.
• Connect the other end of the gas hose to your gas cylinder (butane/propane/LPG) with the appropriate regulator.
• Before opening the gas cylinder valve, apply soapy water to all gas connections. Open the gas valve slowly and check for bubbles, which indicate a leak. If a leak is detected, close the gas valve immediately and re-tighten connections. Do not proceed until all leaks are resolved.

4.3 Vandtilslutning

• Connect a cold water supply hose to the water inlet on the bottom of the unit. Tighten securely.
• Connect the shower hose to the water outlet on the bottom of the unit. Tighten securely.
• Ensure the water supply is capable of providing the required pressure (0.2 to 10 bar).

5. Betjeningsvejledning

Once the unit is properly set up, follow these steps to operate it.

1. Åben gasforsyning: Slowly open the valve on your gas cylinder.
2. Open Water Supply: Tænd for koldtvandsforsyningen til enheden.
3. Start vandgennemstrømning: Press the trigger on the shower head to allow water to flow. The unit will automatically ignite once water flow is detected. The LED display will show the current water temperature.
4. Juster temperatur:
   • To increase water temperature, turn the Gas Flow Control Knob (left) towards 'Max' or turn the Water Flow Control Knob (right) towards 'Min' (reducing water flow allows more time for heating).
   • To decrease water temperature, turn the Gas Flow Control Knob (left) towards 'Min' or turn the Water Flow Control Knob (right) towards 'Max' (increasing water flow reduces heating time).
5. Slukning: To turn off the unit, first close the gas supply valve on the gas cylinder, then close the water supply tap. The unit will automatically shut down.

Note: The unit features automatic shut-off and dry-run protection for safety.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din vandvarmers levetid og optimale ydeevne.

6.1 Rengøring

• Tør ydersiden af ​​enheden af ​​med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Ensure the burner area is free from dust and debris.

6.2 Tømning og opbevaring

• Before storing the unit or if there is a risk of freezing temperatures, completely drain all water from the system. Use the removable drain valve located at the bottom of the unit.
• Disconnect all hoses and the gas supply.
• Store the unit in a dry, safe place, protected from extreme temperatures and direct sunlight.

7. Fejlfinding

If you encounter issues with your Qlima PGWH 1010, refer to the following common problems and solutions.

• Intet varmt vand:
  • Check if the gas cylinder is open and has sufficient gas.
  • Ensure the water supply is open and providing adequate pressure.
  • Verify that the gas and water connections are secure and free of leaks.
  • Confirm that water is flowing through the shower head when the trigger is pressed.
• Enheden tændes ikke:
  • Check gas supply and connections as above.
  • Ensure sufficient water flow to activate the ignition sensor.
  • If the unit has batteries for ignition (not explicitly stated but common), check if they need replacement.
• Vand for varmt eller for koldt:
  • Adjust the Gas Flow Control Knob (left) to increase or decrease heat.
  • Adjust the Water Flow Control Knob (right) to increase or decrease water flow. A slower flow generally results in hotter water.
• Lavt vandtryk:
  • Check your external water supply for adequate pressure.
  • Sørg for, at slangerne ikke er knækkede eller blokerede.

If problems persist after following these steps, please contact Qlima customer support.

8. Specifikationer

Technical details for the Qlima PGWH 1010 Portable Gas Water Heater.

9. Garanti og support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Qlima webwebsted. Gem din købsbevis i tilfælde af garantikrav.