Dio 54515

Chacon DI-O 54515 Universal Dimmer Hvid Brugermanual

Model: 54515 | Brand: Dio

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Chacon DI-O 54515 Universal Dimmer White. This device allows you to wirelessly control your lighting, integrating seamlessly with existing light switches and the DiO 1.0 ecosystem.

The DI-O 54515 micro-module is designed to be installed behind your existing light switch, enabling wireless ON-OFF control of your lights. It supports control via the physical switch, a remote control, or automatically through compatible motion or opening sensors. When connected to a LiteBox or DiO Home+ hub, it offers smartphone app control, timers, and scenario programming, including voice control via Amazon Echo or Google Home.

2. Sikkerhedsoplysninger

Læs alle sikkerhedsinstruktioner omhyggeligt inden installation og brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.

3. Pakkens indhold

Pakken skal indeholde følgende varer:

Chacon DI-O 54515 Universal Dimmer White Module

Image 1: The Chacon DI-O 54515 Universal Dimmer White module, showing its compact design and wiring terminals.

4. Produktfunktioner

Diagram showing wireless control and power specifications

Image 2: An illustrative diagram detailing the wireless control capabilities and key electrical specifications of the module.

5. Opsætning og installation

The installation of the Chacon DI-O 54515 module is designed to be straightforward. However, if you are unsure, consult a qualified electrician.

5.1 Ledningsinstruktioner

  1. Afbryd strømmen: Before starting any electrical work, ensure the power supply to the circuit is turned off at the main circuit breaker.
  2. Adgangsafbryderboks: Carefully remove your existing light switch from the wall box.
  3. Tilslut modul:
    • Connect the Live (L) wire from your electrical supply to the 'L' terminal on the DiO module.
    • Connect the wire going to your light fixture to the output terminal (often marked with a wave symbol or 'OUT') on the DiO module.
    • Connect the two wires from your existing light switch to the designated switch input terminals on the DiO module. This module does not require a neutral wire for operation.
  4. Position Module: Carefully place the DiO module into the wall box behind your existing light switch. Ensure wires are not pinched.
  5. Reinstall Switch: Reattach your existing light switch to the wall box.
  6. Gendan strøm: Tænd for strømmen igen ved afbryderen.
Installation diagram showing the module inside a wall box with a switch

Image 3: A visual representation of the DiO module being installed within a standard electrical wall box, positioned behind an existing light switch.

Close-up of the module showing wiring terminals

Billede 4: En detaljeret view of the Chacon DI-O 54515 module, highlighting its wiring terminals for proper connection.

5.2 Pairing with DiO 1.0 Controls

To enable wireless control, you need to pair the module with a compatible DiO 1.0 remote control, wireless switch, or sensor.

  1. Gå ind i parringstilstand: Refer to the specific instructions for your DiO 1.0 control device to put it into pairing mode. Typically, this involves pressing a pairing button on the module or performing a specific sequence with the existing switch.
  2. Activate Control: Once the module is in pairing mode, activate your DiO 1.0 control (e.g., press the 'ON' button on a remote or wireless switch).
  3. Bekræftelse: The light connected to the module should flash or turn on/off to confirm successful pairing.
  4. Repeat for Multiple Controls: You can pair multiple DiO 1.0 controls to the same module if desired.

6. Betjeningsvejledning

Once installed and paired, the Chacon DI-O 54515 module offers several ways to control your lighting:

7. Vedligeholdelse

The Chacon DI-O 54515 module requires minimal maintenance. Follow these guidelines to ensure optimal performance:

8. Fejlfinding

ProblemMulig årsagLøsning
Lyset tænder/slukker ikke.No power to the module, incorrect wiring, module not paired, faulty bulb.Check circuit breaker. Verify wiring according to Section 5.1. Re-pair the module with the control device (Section 5.2). Test with a known working bulb.
Wireless control not working.Module not paired, control device out of range, battery low in remote/sensor.Ensure module is correctly paired (Section 5.2). Move control device closer to the module. Replace batteries in remote/sensor.
Module indicator light flashing red.Overload or short circuit detected.Immediately disconnect power. Check the connected load does not exceed specifications. Inspect wiring for any short circuits. Consult a qualified electrician if the problem persists.
Stemmestyringen svarer ikke.DiO Home+ hub not connected, incorrect voice command, smart speaker issue.Ensure DiO Home+ is online and linked to your smart speaker account. Verify the correct device name is used in commands. Check smart speaker's internet connection.

9. Specifikationer

FeatureDetalje
Modelnummer54515
MærkeDio
DriftstilstandTÆND SLUK
Nuværende vurdering10 Amps
Switch TypeLysdæmperkontakt
MonteringstypeVægmontering
Aktuator typeFjernbetjening
International Protection RatingIP44
Controller typeAmazon Alexa
KontrolmetodeFjern
FarveHvid
Dimensioner (L x B x H)41 x 42 x 13 mm
Garanti2 år

Note on Dimming Functionality: While the product title includes "Dimmer" and "Switch Type" is listed as "Dimmer Switch", the official specifications list "Operation mode: ON-OFF". Some user reviews also indicate that newer versions of this module function as a simple ON/OFF switch rather than a dimmer. Please verify the specific functionality of your module upon receipt.

10. Garanti og support

This Chacon DI-O 54515 Universal Dimmer White module comes with a 2 års garanti fra købsdatoen, dækker fabrikationsfejl.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official Dio website for contact information. Please have your proof of purchase and model number (54515) ready when contacting support.

Relaterede dokumenter - 54515

Preview DiO 1.0 belysningsmikromodul (54515) - Installations- og brugervejledning
Comprehensive guide for installing and operating the DiO 1.0 Lighting Micro Module (54515). Learn how to wire, pair with remote controls, troubleshoot common issues, and understand technical specifications for your smart home lighting.
Preview DiO 1.0 fjernbetjening (model 54791) - brugermanual og opsætningsvejledning
Omfattende guide til DiO 1.0 fjernbetjeningen (model 54791) fra CHACON. Lær, hvordan du parrer, skifter batterier, bruger funktioner som TIL/FRA og dæmpning, foretager fejlfinding af almindelige problemer og forstår de tekniske specifikationer for din smart home-opsætning.
Preview DiO 1.0 1-kanals fjernbetjening (model 54791) - Brugervejledning
Brugermanual til DiO 1.0 1-kanals fjernbetjening (model 54791) fra CHACON. Lær, hvordan du skifter batteri, forbinder til modtagere, sletter links, bruger fjernbetjeningen, foretager fejlfinding og view tekniske specifikationer.
Preview DiO 1.0 3-kanals fjernbetjening (54760) - Brugermanual og vejledning
Lær, hvordan du installerer, bruger og fejlfinder DiO 1.0 3-kanals fjernbetjeningen (model 54760) til dine smart home-enheder. Indeholder tekniske specifikationer og kompatibilitetsoplysninger.
Preview DiO DiOVDP-IP02 Video Dørtelefon System - Lynstartguide
Denne hurtigstartvejledning indeholder vigtige oplysninger om installation og betjening af DiO DiOVDP-IP02 videodørtelefonsystemet, der har en LCD-skærm og et udendørskamera for forbedret hjemmesikkerhed og kommunikation.
Preview Guide demarrage rapide DiO DIOCAM-FI01: Installation og brug af kameraet Wi-Fi
Découvrez kommentar installationsprogram og bruger faciliterer votre caméra Wi-Fi DiO DIOCAM-FI01. Ce guide rapide couvre la connexion, l'installation wallale, l'utilisation af l'application DiOCam Plus og les caractéristiques-teknikker.