1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Casambi PWM4 Single Color Dimming Controller. The PWM4 is designed to provide smooth and reliable dimming control for single-color LED lighting fixtures, integrating seamlessly into a Casambi Bluetooth mesh network.
2. Produktet er slutview
The Casambi PWM4 is a compact, high-performance dimming controller for 12-24 VDC constant voltage LED loads. It allows for precise control of light intensity through the Casambi app or compatible Casambi-enabled switches. Its robust design ensures stable operation and easy integration into various lighting applications.
Nøglefunktioner:
- Single channel PWM output for constant voltage LED strips and fixtures.
- Bred input voltage range: 12-24 VDC.
- Maximum output current: 6 A total.
- Bluetooth Low Energy (BLE) connectivity for Casambi network integration.
- Control via Casambi app (iOS/Android) or Casambi-compatible devices.
- Compact form factor for easy installation.
3. Opsætning og installation
Sikkerhedsforanstaltninger:
- Sørg for, at strømmen er afbrudt før installation eller ledningsføring.
- Installationen skal udføres af en kvalificeret elektriker.
- Observe all local electrical codes and regulations.
- Do not exceed the maximum current rating of 6 A.
Produktidentifikation:
This image displays various Casambi control modules. The top-left module is the PWM4 Single Color Dimming Controller, identifiable by its 'INPUT 12-24 VDC' and 'OUTPUT 12-24 VDC Max. 6 A total' labels. The other modules are a CBU-ASR 2ch 0-10V controller (top-right), a CBU-A2D 2ch 0-10V/DALI controller (bottom-left), and a general Casambi connector module (bottom-right).
Ledningsinstruktioner:
The PWM4 controller features screw terminals for secure connections. Refer to the top-left module in the image above for terminal locations.
- Power Input (INPUT 12-24 VDC): Connect your 12-24 VDC power supply to the input terminals. Ensure correct polarity: connect the positive (+) terminal of the power supply to the '+' terminal on the controller, and the negative (-) terminal of the power supply to the '-' terminal on the controller.
- LED Output (OUTPUT 12-24 VDC): Connect your single-color LED load to the output terminals. The PWM4 has four output terminals (1, 2, 3, 4) which are internally connected to provide a single dimming channel. Connect the positive (+) wire of your LED load to any of the output terminals (1, 2, 3, or 4) and the negative (-) wire of your LED load to the common negative output terminal (often marked with a line or a common symbol, or simply connect to the negative input terminal if the output is shared common negative). Ensure the total current draw of your LED load does not exceed 6 A.
- Sikre forbindelser: Tighten all screw terminals firmly to prevent loose connections.
Initial Pairing with Casambi App:
- Tænd: After wiring, apply power to the PWM4 controller. The connected LEDs should illuminate.
- Download app: Download the Casambi app from the Apple App Store (for iOS) or Google Play Store (for Android).
- Åbn app: Launch the Casambi app on your smartphone or tablet.
- Tilføj enhed: The app will automatically detect nearby Casambi devices. Select the PWM4 from the list of unconfigured devices.
- Konfigurer: Follow the in-app instructions to add the device to your network, assign it to a fixture, and configure its dimming behavior.
4. Betjeningsvejledning
The Casambi PWM4 is primarily controlled through the Casambi app, which offers a wide range of functionalities for managing your lighting.
Using the Casambi App:
- Dæmpning: Use the slider controls within the app to adjust the brightness of the connected LED lights.
- Scener: Create and save custom lighting scenes (e.g., 'Bright', 'Relax', 'Night Light') with specific brightness levels.
- Animationer: Program dynamic lighting effects or sequences.
- Timere og tidsplaner: Set up automated on/off times or scene activations based on time of day or astronomical clock.
- Gallerier: Organize your lighting fixtures into groups for simultaneous control.
- Kontakter: Pair the PWM4 with Casambi-compatible wireless switches for physical control.
5. Vedligeholdelse
The Casambi PWM4 controller is designed for long-term, maintenance-free operation. However, general care can help ensure its longevity.
- Rensning: Tør om nødvendigt forsigtigt enheden af med en tør, blød klud. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
- Miljø: Ensure the device is installed in a dry environment, free from excessive dust, moisture, and extreme temperatures. The IP20 rating indicates protection against solid objects larger than 12.5mm, but no protection against water.
- Forbindelser: Periodically check wiring connections to ensure they remain secure.
6. Fejlfinding
If you encounter issues with your PWM4 controller, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| LEDs do not turn on. | No power to controller; incorrect wiring; faulty LED load. | Kontroller strømforsyningens tilslutning og volumentage. Verify input and output wiring polarity. Test LED load separately. |
| Cannot find device in Casambi app. | Device not powered; out of Bluetooth range; app issue. | Ensure controller is powered. Move closer to the device. Restart the Casambi app or your mobile device. |
| LEDs flicker or dim erratically. | Overload; unstable power supply; loose connections. | Ensure total LED load does not exceed 6 A. Verify power supply stability. Check all wiring connections. |
| Device disconnects frequently. | Interference; weak Bluetooth signal. | Reduce distance between controller and controlling device. Minimize sources of wireless interference. |
7. Tekniske specifikationer
| Specifikation | Værdi |
|---|---|
| Modelnummer | 0354838856316 |
| Input bindtage | 12-24 VDC |
| Udgangstype | PWM, Single Channel |
| Maks. Udgangsstrøm | 6 I alt |
| Forbindelse | Bluetooth lavenergi (BLE) |
| Controller type | iOS, Android (via Casambi App) |
| Terminaltype | Skrue |
| IP-vurdering | IP20 |
| Certificeringer | ETL |
| Varens vægt | 2.65 ounce |
| Fabrikant | CASAMBI |
8. Garanti og support
Casambi products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Casambi webwebsted. Gem din købsbevis til garantikrav.
For technical support, troubleshooting assistance, or further inquiries, please contact your Casambi distributor or visit the Casambi support portal online. Ensure you have your product model number and a description of the issue ready when seeking support.
