Orbit 24620 1-udløbsslange til vandhane med timer brugermanual

Indledning

Thank you for choosing the Orbit 24620 1-Outlet Hose Faucet Timer. This device is designed to automate your watering schedule, providing convenience and efficiency for your lawn and garden. With its user-friendly interface and robust construction, you can easily program precise watering times, helping to conserve water and maintain healthy plants. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your timer.

Vigtige sikkerhedsoplysninger

• Read all instructions carefully before operating the timer.
• Do not immerse the timer in water. It is water-resistant, not waterproof.
• Use only fresh alkaline batteries of the specified type (e.g., AA or AAA). Do not mix old and new batteries or different battery types.
• Remove batteries if the timer will not be used for an extended period to prevent corrosion.
• Do not expose the timer to extreme temperatures (below freezing or above 120°F / 49°C).
• Sørg for, at alle forbindelser er tætte for at forhindre lækager.
• Opbevares utilgængeligt for børn.

Produktkomponenter

Familiarize yourself with the main parts of your Orbit 1-Outlet Hose Faucet Timer:

• Indgangsforbindelse: Tilsluttes din udendørs vandhane.
• Udgangstilslutning: Tilsluttes din haveslange.
• Digital skærm: Shows time, program settings, and status.
• Kontrolopkald: Used to navigate through programming options.
• Knapper: For setting specific values (e.g., "SET CLOCK", "START TIME", "HOW LONG", "HOW OFTEN", "AUTO/MANUAL", "OFF").
• Batterirum: Located on the back or side, for battery installation.

Figur 1: Front view of the Orbit 1-Outlet Hose Faucet Timer, showing the digital display and control dial. The inlet is at the top, and the outlet is at the bottom.

Opsætning og installation

1. Batteriinstallation

1. Find batterirummet på bagsiden eller siden af ​​timeren.
2. Remove the battery tray or cover.
3. Isæt to (2) nye AA alkaline-batterier, og sørg for at polerne vender korrekt (+/-).
4. Replace the battery tray or cover securely. The display should light up.

2. Attaching the Timer to the Faucet

1. Sørg for, at din udendørs vandhane er slukket.
2. Thread the timer's inlet connection (top) onto your outdoor faucet.
3. Hand-tighten until snug. Do not overtighten.
4. Turn on your faucet fully. The timer is designed to operate under full water pressure.

3. Attaching the Hose

1. Thread your garden hose onto the timer's outlet connection (bottom).
2. Stram med hånden, indtil den sidder godt fast.

Figur 2: Side view of the Orbit 1-Outlet Hose Faucet Timer, showing the robust construction and connections.

Betjeningsvejledning

The Orbit timer features a large digital display and a simple dial for programming. Rotate the dial to select a setting, then use the buttons to adjust values.

1. Indstil uret

1. Drej drejeknappen til SÆT UR.
2. Timen vil blinke. Brug + og - buttons to set the current hour (AM/PM).
3. Tryk på NÆSTE button to move to minutes.
4. Bruge + og - to set the current minutes.
5. Trykke NÆSTE for at bekræfte.

2. Starttid

1. Drej drejeknappen til STARTTID.
2. Set the desired time for watering to begin using the + og - buttons for hour and minutes.
3. Trykke NÆSTE for at bekræfte.

3. How Long (Watering Duration)

1. Drej drejeknappen til HVOR LÆNGE.
2. Set the duration for each watering cycle from 1 to 360 minutes using the + og - knapper.
3. Trykke NÆSTE for at bekræfte.

4. How Often (Watering Frequency)

1. Drej drejeknappen til HVOR OFTE.
2. Indstil frekvensen:
   • Every hour (for short, frequent watering)
   • Every 6, 12 hours
   • Every 1, 2, 3... up to 7 days
3. Brug + og - buttons to select the desired interval.
4. Trykke NÆSTE for at bekræfte.

5. Auto/Manual Operation & Rain Delay

• BIL: Drej drejeknappen til AUTO/MANUEL. The timer will now operate according to your programmed schedule.
• MANUEL: To manually water, turn the dial to AUTO/MANUEL, og tryk derefter på MANUEL knap. Brug + og - to set a manual watering duration, then press ENTER to start. The timer will revert to AUTO after the manual cycle.
• REGNFORSINKELSE: If rain is expected, you can pause your watering schedule. Turn the dial to AUTO/MANUEL, og tryk derefter på og hold FORSINKELSE AF REGN knap. Brug + og - to select a delay of 1 to 7 days. The timer will resume its schedule after the delay.

6. FRA

Drej drejeknappen til SLUKKET to stop all automatic and manual watering. The timer will remain off until the dial is moved to another setting.

Opretholdelse

Udskiftning af batteri

When the battery indicator on the display shows low power, or if the display becomes dim, it's time to replace the batteries. Follow the battery installation steps in the "Setup and Installation" section. Replacing batteries typically retains your programmed settings for a short period, but it's good practice to verify them after replacement.

Rensning

Tør timeren med annonceamp cloth to remove dirt or debris. Do not use abrasive cleaners or solvents. Ensure the battery compartment remains dry.

Vinterisering

Before the first frost, remove the timer from the faucet. Drain any water from the timer and store it indoors in a dry, protected location where temperatures will not drop below freezing. Remove batteries before storage.

Fejlfinding

Specifikationer

Figur 3: Dimensions of the Orbit 1-Outlet Hose Faucet Timer: 7.62cm depth, 18.11cm height, 22.56cm width.

Garantioplysninger

Orbit products are manufactured with quality materials and workmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit webwebstedet. Behold din købskvittering som købsbevis.

Kundesupport

If you have any questions, require technical assistance, or need to troubleshoot issues not covered in this manual, please contact Orbit customer support.

• Webwebsted: www.orbitonline.com
• Telefon: Refer to the Orbit webwebsted for regionale kontaktnumre.