1. Introduktion
The Memphis Audio SE1040 10-inch Street Edge Single 4-Ohm Subwoofer is designed to deliver impressive bass performance for your vehicle's audio system. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your subwoofer.
Nøglefunktioner:
- Polypropylene SE branded cone for durability and sound quality.
- Rubber surround for enhanced excursion and longevity.
- 1.5-inch copper voice coil for efficient power handling.
- 27oz magnet for robust motor structure.
- DVVC Direct Vent Voice Coil Cooling for thermal management.
2. Sikkerhedsoplysninger
Please read all safety instructions before installing or operating your subwoofer. Failure to do so may result in injury or damage to the product or vehicle.
- Frakobl altid bilens negative batteripol, inden du påbegynder elektrisk arbejde.
- Sørg for, at alle ledninger er korrekt isoleret og fastgjort for at forhindre kortslutninger og skader.
- Avoid mounting the subwoofer in locations where it may obstruct driver visibility or interfere with vehicle safety systems.
- Udsæt ikke subwooferen for overdreven fugtighed eller ekstreme temperaturer.
- Use appropriate hearing protection when testing or operating the audio system at high volumes.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Memphis Audio SE1040 10" Subwoofer (Model: SE1040-UVG)
4. Opsætning og installation
Proper installation is crucial for the performance and longevity of your subwoofer. If you are unsure about any part of the installation process, consult a professional car audio installer.
4.1 Monteringsovervejelser
The SE1040 subwoofer is designed for installation in a suitable enclosure (not included). The enclosure type (sealed, ported, bandpass) will significantly impact the subwoofer's performance characteristics. Refer to recommended enclosure specifications from Memphis Audio for optimal results.
- Ensure the mounting surface is rigid and free from vibrations.
- Allow adequate clearance around the subwoofer for proper air circulation and excursion.
- Secure the subwoofer firmly to the enclosure using appropriate screws and gaskets to prevent air leaks.
Figur 1: Vinklet view of the Memphis Audio SE1040 10-inch subwoofer, showcasing keglen og omgiver.
Figur 2: Top-down view of the Memphis Audio SE1040 10-inch subwoofer, highlighting the 'SE Street Edge' branding on the cone.
4.2 Ledningsforbindelser
The SE1040 is a single 4-Ohm subwoofer. Connect the subwoofer to a compatible amplifier that can safely operate at a 4-Ohm load. Ensure correct polarity (+ to + and - to -) to avoid phase issues and ensure optimal sound reproduction.
- Use high-quality speaker wire of appropriate gauge for the power level and distance.
- Strip wire ends carefully and ensure no stray strands can cause short circuits.
- Securely connect wires to the subwoofer's push terminals.
Figur 3: Side view of the Memphis Audio SE1040 10-inch subwoofer, showing the rear magnet structure and speaker wire terminals.
5. Betjening
Once installed, the subwoofer operates as part of your vehicle's overall audio system. Proper amplifier settings and head unit adjustments are essential for optimal performance.
5.1 AmpLifier Matching
Sørg for din amplifier's RMS power output matches the subwoofer's RMS power handling (200 watts). Overpowering or underpowering can lead to damage or poor performance.
5.2 Indledende lydjustering
- Start med amplifier's gain control at its minimum setting.
- Play a familiar piece of music with strong bass content.
- Langsomt øge amplifier's gain until the subwoofer blends seamlessly with the rest of your audio system without distortion.
- Adjust the low-pass filter (LPF) on your amplifier or head unit to prevent the subwoofer from playing frequencies it is not designed for, typically between 80Hz and 120Hz.
6. Vedligeholdelse
The Memphis Audio SE1040 subwoofer requires minimal maintenance to ensure long-term performance.
- Periodically inspect the subwoofer cone and surround for any signs of damage or wear.
- Keep the subwoofer free from dust and debris. Use a soft, dry cloth for cleaning.
- Sørg for, at alle ledningsforbindelser forbliver sikre.
7. Fejlfinding
Hvis du oplever problemer med din subwoofer, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra subwooferen | Ingen strøm til amplifier; loose wiring; amplifier in protect mode; incorrect head unit settings. | Check amplifier power and ground connections. Verify remote turn-on wire. Inspect all speaker wires. Check amplifier fuses. Adjust head unit settings (subwoofer output, volume). |
| Forvrænget eller uklar bas | Amplifier gain set too high; incorrect LPF setting; damaged subwoofer; poor enclosure. | Reducere amplifier gain. Adjust LPF. Inspect subwoofer cone and surround for damage. Ensure enclosure is sealed and properly constructed. |
| Subwooferen afbrydes periodisk | Loose wiring; amplifier overheating; impedance mismatch. | Check all wiring connections. Ensure amplifier has adequate ventilation. Verify amplifier is stable at the subwoofer's 4-Ohm impedance. |
8. Specifikationer
Detailed technical specifications for the Memphis Audio SE1040 10" Street Edge Single 4-Ohm Subwoofer:
| Specifikation | Værdi |
|---|---|
| Modelnavn | SE1040 |
| Højttaler type | Subwoofer |
| Anbefalet anvendelse af produktet | Køretøj |
| Subwoofer diameter | 10 tommer |
| Antal enheder | 1.0 tæller |
| Inkluderede komponenter | SE1040-UVG |
| Produktdimensioner | 6.3" D x 11.61" B x 5.3" H |
| Varens vægt | 7.7 pund |
| Impedans | 4 Ohm |
| Antal genstande | 1 |
| Højttaler størrelse | 10 tommer |
| Strømkilde | Corded Electric (for ampstrømforsyningsforbindelse) |
| Bashøjttaler diameter | 10 tommer |
| Type køretøjstjeneste | SUVs, Select Cars, Truck |
| Audio driver størrelse | 10 tommer |
| UPC | 702588210085 |
| Fabrikant | Memphis lyd |
| Højttaler Maksimal udgangseffekt | 200 Watt RMS / 400 Watt Peak |
| Forbindelsesteknologi | Auxiliary, RCA (via amplivligere) |
| Monteringstype | Flush Mount |
9. Garantioplysninger
Memphis Audio products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims. For detailed warranty information, please contact Memphis Audio customer support or refer to the warranty card included with your product, if applicable.
10. Kundesupport
For further assistance, technical support, or inquiries regarding your Memphis Audio SE1040 subwoofer, please contact Memphis Audio directly.
- Fabrikant: Memphis lyd
- Online butik: Visit the Memphis Audio Store on Amazon
