Pro-Ject Phono Box S2 Ultra Phono Preamplivligere brugervejledning

1. Introduktion

The Pro-Ject Phono Box S2 Ultra is a high-performance phono preamplifier designed to enhance the audio quality from your turntable. It features a discrete circuit design without operational ampløftere (OpAmps) and utilizes audiophile-grade polystyrene capacitors for precise RIAA equalization. Its robust metal casing provides effective protection against electromagnetic interferences, ensuring a clean and detailed sound reproduction.

This manual provides essential information for setting up, operating, and maintaining your Phono Box S2 Ultra, ensuring optimal performance and longevity.

Figur 1: Forside view of the Pro-Ject Phono Box S2 Ultra. This image displays the sleek, silver-colored metal chassis with a single power button on the left and the "Phono Box S2 Ultra" text along with the Pro-Ject logo on the right.

2. Opsætning og forbindelser

Before connecting your Phono Box S2 Ultra, ensure all audio equipment is powered off. Carefully unpack the unit and verify all components are present.

2.1. Udpakning og indhold

Your package should contain the Phono Box S2 Ultra unit and its external 18V DC power supply.

2.2. Connecting Your Turntable

Tilslut RCA-udgangskablerne fra din pladespiller til "In" RCA jacks on the rear of the Phono Box S2 Ultra. Ensure the left and right channels are correctly matched (typically red for right, white/black for left). If your turntable has a ground wire, connect it to the ground terminal located next to the input jacks.

2.3. Connecting to Your Amplivligere/modtager

Tilslut "Out" RCA jacks of the Phono Box S2 Ultra to a line-level input on your amplifier or receiver (e.g., "Aux", "CD", "Line In"). Do not connect it to a "Phono" input on your amplifier, as this would result in double equalization and distorted sound.

2.4. Strømtilslutning

Connect the external 18V DC power supply to the "18V" input jack on the rear of the Phono Box S2 Ultra. Then, plug the power supply into a suitable AC outlet.

Bag view of the Pro-Ject Phono Box S2 Ultra showing input and output RCA jacks, ground terminal, subsonic filter button, and power input.

Figure 2: Rear connections of the Phono Box S2 Ultra. This image highlights the "In" (input) and "Out" (output) RCA connectors for left and right channels, the ground screw, the small black button for the subsonic filter, and the 18V DC power input jack.

2.5. Initial Configuration (Dip Switches)

The Phono Box S2 Ultra features dip switches on its underside for adjusting input impedance, capacitance, and gain. These settings should be matched to your phono cartridge's specifications for optimal sound. Refer to your cartridge's manual for recommended settings. A small tool (e.g., a toothpick or small screwdriver) may be needed to adjust these switches.

Gevinst: Adjusts the output level to match your amplifier's input sensitivity and cartridge output. Four adjustable gain levels are available.
Input Impedance/Capacitance: Crucial for matching Moving Magnet (MM) and Moving Coil (MC) cartridges. Incorrect settings can lead to frequency response anomalies.
Subsonisk filter: A switchable -18 dB @ 20Hz filter is located on the rear panel (see Figure 2). This filter helps to remove very low-frequency rumble and warp-induced signals that can cause speaker cone excursion without contributing to audible music.

It is recommended to experiment with these settings to find the best sound for your specific setup and listening preferences.

3. Betjening

Once all connections are secure and dip switches are set, you can begin using your Phono Box S2 Ultra.

3.1. Tænd/sluk

Press the power button on the front panel (refer to Figure 1) to turn the unit on or off. A small LED indicator next to the button will illuminate when the unit is powered on.

3.2. Listening to Records

With the Phono Box S2 Ultra powered on and your amplifier set to the correct input, you can now play records on your turntable. Adjust the volume on your amplifier as usual.

Pro-Ject Phono Box S2 Ultra placed next to a blue Pro-Ject turntable with an orange record, illustrating a typical setup.

Figure 3: The Phono Box S2 Ultra integrated into an audio system. This image shows the compact preamplifier positioned next to a turntable, demonstrating its small footprint and how it fits into a typical vinyl playback setup.

4. Vedligeholdelse

Proper care will ensure the longevity and performance of your Phono Box S2 Ultra.

Rensning: Disconnect the unit from power before cleaning. Use a soft, dry, lint-free cloth to wipe the exterior. Avoid using liquid cleaners, aerosols, or abrasive materials.
Placering: Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
Opbevaring: Hvis enheden opbevares i længere tid, skal den afbrydes til strømmen og opbevares et køligt og tørt sted, helst i originalemballagen.

5. Fejlfinding

If you encounter issues with your Phono Box S2 Ultra, consult the following table for common problems and solutions.

Problem	Mulig årsag	Løsning
Ingen lyd eller meget lav lydudgang.	Enheden er ikke tændt. Forkerte input/output-forbindelser. Incorrect gain settings on dip switches. Amplifier input not selected correctly.	Ensure power button is pressed and LED is illuminated. Verify RCA cables are securely connected to "In" from turntable and "Out" to amplivligere. Check dip switch settings for appropriate gain for your cartridge. Select the correct line-level input on your amplifier (e.g., Aux, CD).
Distorted or unnatural sound.	Phono Box connected to amplifier's "Phono" input. Incorrect impedance/capacitance settings. Beskadigede kabler.	Connect Phono Box S2 Ultra to a line-level input (e.g., Aux, CD) on your amplivligere. Adjust dip switches to match your cartridge's recommended impedance and capacitance. Try different RCA cables.
Summende eller summende lyd.	Ground wire not connected or loose. Interferens fra andre elektroniske enheder. Defekt strømforsyning.	Ensure turntable ground wire is securely connected to the Phono Box S2 Ultra's ground terminal. Move the Phono Box S2 Ultra away from power transformers, Wi-Fi routers, or other electronic devices. Test with a different power outlet. Contact support if hum persists.

6. Specifikationer

The following are key technical specifications for the Pro-Ject Phono Box S2 Ultra:

Model: Phono Box S2 Ultra
Input/output: 1 par RCA stik
Kanaler: 2
Voltage: 18 volt (DC)
Materiale: Metal casing
Funktioner: Switchable input impedance/capacitance, Four adjustable gain levels, Switchable Subsonic filter –18 dB @ 20Hz, Audiophile-grade polystyrene capacitors, No Operational Ampløftere (OpAmps) used.
Vægt: Cirka 1.52 pund (0.69 kg)
Overholdelse: CE, FCC
Fabrikant: Projekt

Note: Product dimensions provided in source data (0.39 x 0.39 x 0.39 inches) appear to be incorrect. The unit features a compact, surface-mount design.

7. Garanti og support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems webGarantibetingelserne kan variere fra region til region.

Should you require technical assistance or support, please contact your authorized Pro-Ject dealer or the Pro-Ject customer service department. Contact information can typically be found on the manufacturer's webwebsted eller i produktemballagen.

For mere information, besøg Pro-Ject Store on Amazon.

	Pro-Ject AD Box S2 Phono brugermanual Brugermanual til Pro-Ject AD Box S2 Phono, en phono-forhøjttaler af høj kvalitetampLifier til pladespillere med Moving Magnet- eller Moving Coil-pickups, der muliggør digitalisering og lagring af vinylplader og analoge signaler.
	Pro-Ject T1, T1 Phono SB, T1 BT pladespiller brugermanual og opsætningsvejledning Omfattende instruktioner til opsætning, betjening og vedligeholdelse af dine Pro-Ject T1-, T1 Phono SB- og T1 BT-pladespillere. Indeholder tekniske specifikationer, fejlfinding og garantioplysninger.
	Pro-Ject Tube Box DS3 B Brugermanual: Opsætning, tilslutninger og specifikationer Omfattende brugermanual til Pro-Ject Tube Box DS3 B phono-forstærkerampLifier. Dækker opsætning, tilslutninger, patronindstillinger, tekniske specifikationer, sikkerheds- og overholdelsesoplysninger.
	Pro-Ject A1 pladespiller: Brugermanual, opsætning og specifikationer Omfattende instruktioner til opsætning, betjening og vedligeholdelse af din Pro-Ject A1 pladespiller. Indeholder tekniske specifikationer, fejlfindingstips og garantioplysninger.
	Vejledning til pleje af Pro-Ject Phono-patron og pen Lær, hvordan du plejer din Pro-Ject phono-pickup, herunder rengøring af stylus, rengøring af plader med Pro-Ject Brush-it og udskiftning af stylus. Denne vejledning dækker de vigtigste dele af en phono-pickup og giver instruktioner til vedligeholdelse.
	Pro-Ject Debut EVO 2 pladespiller: Opsætningsvejledning, specifikationer og fejlfinding af hum Omfattende opsætningsvejledning, tekniske specifikationer og fejlfinding af elektrisk brummen til Pro-Ject Debut EVO 2 pladespilleren. Lær, hvordan du samler, tilslutter og vedligeholder din Hi-Fi-pladespiller.