Indledning
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sencor SDC 2800 W Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and to maximize its lifespan. Keep this manual for future reference.
Produkt overview
The Sencor SDC 2800 W is a digital alarm clock designed for clear time display, date, day of the week, and temperature readings. It features two independent alarms and a backlight for visibility in various lighting conditions.
This image displays the Sencor SDC 2800 W Digital Alarm Clock. The large digital display shows the time as 12:58 PM, with a PM indicator and a backlight icon. On the right side, smaller digits indicate the date as December 30th (30.12), the day of the week as Monday (MO), and the current temperature as 20.6°C. Below the temperature, there are two alarm icons, labeled 1 and 2, indicating the presence of two settable alarms. The clock has a white rectangular casing with control buttons visible on the top edge.
Control Buttons (Top Panel)
- SÆT: Enters setting mode for time, date, and alarms.
- UP/DOWN (▲/▼): Adjusts values during setting mode.
- ALM: Activates/deactivates alarms and enters alarm setting mode.
- SNOOZE / LYS: Activates snooze function during an alarm; temporarily illuminates backlight.
Opsætning
Installation af batteri
- Find batteridækslet på bagsiden af vækkeuret.
- Remove the cover by sliding or lifting it.
- Insert two (2) AAA batteries (not included) according to the polarity indicators (+ and -) inside the compartment.
- Sæt batterirummets dæksel på igen.
- The clock will power on and display default settings or the current time if batteries were already present.
Betjeningsvejledning
Indstilling af tid og dato
- Tryk og hold på SÆT button for approximately 3 seconds until the time display starts flashing.
- Brug UP or NED knapperne for at justere timetallet. Tryk på SÆT for at bekræfte.
- Brug UP or NED knapperne for at justere minuttallet. Tryk på SÆT for at bekræfte.
- Continue this process to set the year, month, and day.
- After setting the day, press SÆT to exit the time/date setting mode.
- For at skifte mellem 12-timers og 24-timers format skal du trykke på UP button while in normal time display mode. The "PM" indicator will appear for PM hours in 12-hour format.
Indstilling af alarmer (Alarm 1 og Alarm 2)
- Tryk på ALM Tryk én gang på knappen for at få vist Alarm 1-tiden.
- Tryk og hold på ALM button for approximately 3 seconds until the Alarm 1 time starts flashing.
- Brug UP or NED buttons to adjust the Alarm 1 hour. Press ALM for at bekræfte.
- Brug UP or NED buttons to adjust the Alarm 1 minute. Press ALM for at bekræfte.
- Repeat steps 1-4 for Alarm 2 by pressing ALM again after setting Alarm 1.
- For at aktivere eller deaktivere en alarm skal du trykke på ALM button repeatedly in normal time display mode until the desired alarm icon (1 or 2) appears or disappears on the display.
Snooze funktion
- Når en alarm lyder, skal du trykke på SNOOZE / LYS button to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
- To turn off the alarm completely, press any other button (e.g., SÆT, ALM, UP, NED).
Baggrundsbelysning
- Tryk på SNOOZE / LYS button at any time to briefly illuminate the display backlight for better visibility in low light conditions.
Temperatur display
- The clock automatically displays the ambient temperature.
- For at skifte mellem Celsius (°C) og Fahrenheit (°F), tryk på NED button while in normal time display mode.
Opretholdelse
- Rensning: Wipe the clock clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Udskiftning af batteri: Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AAA batteries.
- Opbevaring: Hvis uret ikke skal bruges i længere tid, skal batterierne fjernes for at forhindre lækage.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen er tom eller svag. | Batterierne er lave eller forkert installeret. | Udskift batterierne med nye AAA-batterier, og sørg for at polariteten vender korrekt. |
| Alarmen lyder ikke. | Alarmen er ikke aktiveret eller indstillet forkert. | Ensure the alarm icon (1 or 2) is visible on the display. Verify alarm time is set correctly. |
| Forkert tidspunkt/dato. | Tid/dato blev ikke indstillet eller nulstillet efter batteriskift. | Følg instruktionerne under "Indstilling af tid og dato" for at nulstille. |
| Temperaturaflæsningen virker unøjagtig. | Clock is placed near a heat source or in direct sunlight. | Relocate the clock to an area with stable ambient temperature. |
Specifikationer
- Mærke: Sencor
- Model: SDC 2800 W
- Farve: Hvid
- Skærmtype: Digital
- Strømkilde: 2 x AAA batterier (medfølger ikke)
- Dimensioner: 5.08 x 2.64 x 1.57 tommer (12.9 x 6.7 x 4 cm)
- Varens vægt: 4.8 ounce (137 gram)
- Særlige funktioner: Alarm, Date, Day of Week, Temperature Display (°C/°F), Backlight
- Materiale: Plast
- Driftstilstand: Elektrisk
Garanti og support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Sencor customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, visit the official Sencor webwebstedet eller kontakt deres kundesupportkanaler.
