Indledning
The Listen Technologies LW-100P-02-01 Listen Everywhere 2 Channel Server is designed to provide an affordable and reliable assistive listening solution. It supports up to 1000 users and utilizes your existing Wi-Fi network to stream audio directly to users via a free mobile application. This server is ideal for meeting ADA & IBC assistive listening requirements and offers cloud-based management for easy updates and customization.
Nøglefunktioner
- Supports up to 1000 users simultaneously.
- Provides 2 mono audio channels.
- Features low-latency audio streaming.
- Integrates with existing wireless networks (Wi-Fi).
- Compatible with iOS and Android devices via a dedicated app.
- Cloud-based management for remote administration and customization.
Opsætningsvejledning
This section provides instructions for the initial setup of your Listen Everywhere server.
1. Udpakning og inspektion
Carefully remove all components from the packaging. Inspect the server and accessories for any signs of damage. If any damage is found, contact your vendor immediately.
2. Fysiske forbindelser
Connect the necessary cables to the rear panel of the LW-100P-02-01 server.
Figur 1: Tilslutninger på bagpanelet. This image displays the rear panel of the LW-100P-02-01 server, highlighting its connectivity options. From left to right, you can see the Ethernet port (RJ45), a USB Type-A 2.0 port, the 5V DC power input, two sets of RCA audio inputs (Left and Right), and two sets of terminal block connectors for analog audio inputs.
- Magt: Connect the provided 5V DC power adapter to the power input jack on the rear panel.
- Netværk: Connect an Ethernet cable from your network router or switch to the RJ45 Ethernet port. Ensure your network supports 100 BaseT or 1000 BaseT (gigabit) and has Wi-Fi (802.11n or better with WMM enabled) for client device connectivity.
- Lydindgange: Connect your audio sources (e.g., mixer, sound system) to the RCA (Left/Right) or terminal block audio inputs. The server supports two mono channels.
- USB: The USB Type-A 2.0 port is available for future use or specific configurations as per manufacturer instructions.
3. Netværkskonfiguration
The server is designed to integrate with your existing Wi-Fi network. It supports DHCP for automatic IP address assignment, or you can configure a static or reserved IP address if required by your network setup. Ensure your Wireless Access Points (WAPs) operate on 2.4 GHz & 5 GHz frequencies and have WMM (Wi-Fi Multimedia) enabled for optimal performance.
Operation
Operating the Listen Everywhere server primarily involves managing it through its cloud-based interface and client interaction via the mobile app.
1. Tænder
Once all connections are made, press the power button on the front panel to turn on the device. The power indicator LED will illuminate.
Figur 2: Frontpanel overview. This image shows the front panel of the LW-100P-02-01 server. On the left, the 'LISTEN EVERYWHERE' logo is visible. In the center, there are two small green LED indicators labeled '1' and '2' for the audio channels. On the right, a prominent circular power button with an illuminated blue ring is present.
2. Cloud-Based Management
Access the Listen Everywhere cloud platform via a web browser to manage your server. From here, you can:
- Monitor server status and connected users.
- Configure audio channels and input levels.
- Customize the in-app experience with welcome messages, videos, and banners.
- Apply firmware updates.
3. Client App Usage
Users download the free Listen Everywhere app from the iOS App Store or Google Play Store. Once installed, they connect to your facility's Wi-Fi network and launch the app to select and listen to the available audio channels.
Opretholdelse
The Listen Everywhere server is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- Rensning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or aerosols, as they may damage the components.
- Ventilation: Ensure the server is placed in a location with adequate airflow to prevent overheating. Do not block ventilation openings.
- Miljø: Operate the server within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, direct sunlight, or moisture.
- Firmwareopdateringer: Regularly check the cloud management platform for available firmware updates to ensure optimal performance and access to new features.
Fejlfinding
If you encounter issues with your Listen Everywhere server, try the following basic troubleshooting steps:
- Ingen strøm: Ensure the power adapter is securely connected to the server and a working power outlet. Check if the power button LED is illuminated.
- Ingen lyd: Verify that audio sources are properly connected to the server's inputs. Check the audio input levels in the cloud management platform. Ensure client devices are connected to the correct Wi-Fi network and the app is functioning.
- Problemer med netværksforbindelse: Confirm the Ethernet cable is securely connected. Check your router/switch status. Ensure your network is providing DHCP or that the server's static IP is correctly configured. Verify WAP functionality and WMM enablement.
- Problemer med appforbindelse: Ensure the client device is connected to the same Wi-Fi network as the server. Restart the app or the client device.
- Dårlig lydkvalitet: Check the bandwidth usage on your network. Approximately 140 kbps per user is required. Ensure your WAPs are not overloaded and are 802.11n or better.
For persistent issues, refer to the detailed troubleshooting guides available on the Listen Technologies support webwebstedet eller kontakt teknisk support.
Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Modelnavn | LW 100P 2 |
| Lydindgange | Two (2) Female RCA (Right, Left), -14 dBu nominal, -2 dBu max, 15k ohm impedance; Analog Terminal Block Connectors |
| Ethernet | RJ45: 100 BaseT or 1000 BaseT (gigabit) |
| USB | Type A 2.0 (kvinde) |
| Konfiguration af IP-adresse | DHCP, Statisk, Reserveret |
| Prioritering | QoS/ToS |
| Max brugere | 1000 (pr. server) |
| Max kanaler | 2 mono |
| WAP-understøttelse | 802.11n eller bedre med WMM aktiveret |
| Understøttede WAP-frekvenser | 2.4 GHz og 5 GHz |
| Brug af båndbredde | Ca. 140 kbps pr. bruger |
| App support | iOS/Android |
| Cloud Service | Ja |
| Regulatorisk | FCC, CE, RoHS |
| Dimensioner (HxBxD) | 45 x 170 x 100 mm (1.77" x 6.69" x 3.94") |
| Vægt | 0.59 kg (1.3 lbs) |
| Forbindelsesteknologi | Ethernet, RCA, USB, Wi-Fi |
| Lydudgangstilstand | Mono |
| Monteringstype | Bordplademontering |
Garantioplysninger
The Listen Everywhere LW-100P-02-01 server comes with a Limited Warranty. Please refer to the official Listen Technologies website or your purchase documentation for specific terms, conditions, and duration of the warranty.
Støtte
For technical support, product registration, or additional resources, please visit the official Listen Technologies support webwebsted. Du kan også kontakte deres kundeservice direkte for at få hjælp.
