Indledning
This manual provides comprehensive instructions for the Timex Men's Dress Day-Date 41mm Watch, model TW2T50400JT. Please read this manual carefully to ensure proper use and maintenance of your timepiece. This watch features an analog-quartz movement, a black dial with partial Roman numerals, and a day and date window. It is water-resistant up to 30 meters (100 feet).
Produkt overview
Figur 1: Front view of the Timex Men's Dress Day-Date 41mm Watch. This image displays the black dial with white hands, partial Roman numerals, and the day-date window at the 3 o'clock position. The black stainless steel bracelet is also visible.
Figur 2: Side view of the watch, highlighting the crown used for setting time and date. The slim profile of the 41mm case is also visible.
Figur 3: Tilbage view of the watch bracelet, showcasing the deployment clasp mechanism. This clasp ensures a secure fit and easy removal.
Opsætning
Indstilling af tid
- Pull the crown (refer to Figure 2) out to position 2.
- Turn the crown clockwise to move the hour and minute hands forward until the desired time is set. Ensure to account for AM/PM if setting the day/date.
- Tryk kronen tilbage i position 1 for at starte uret.
Indstilling af dag og dato
- Træk kronen ud til position 1 (første klik).
- Drej kronen mod uret for at justere dagen.
- Drej kronen med uret for at justere datoen.
- Once the correct day and date are displayed, pull the crown out to position 2 and set the time as described above, ensuring the day and date change at midnight.
- Tryk kronen tilbage i position 0 for at starte uret.
Betjeningsvejledning
Your Timex watch is powered by an analog-quartz movement, providing accurate timekeeping. Once the time, day, and date are set, the watch will operate continuously. The day and date will automatically advance at midnight.
Vandmodstand
Dette ur er vandtæt ned til 30 meter (100 fod). Det betyder, at det kan modstå stænk eller kortvarig nedsænkning i vand. Det er ikke suitable for swimming, bathing, or diving. Avoid operating the crown while the watch is wet to prevent water ingress.
Opretholdelse
Rensning
- Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dust and fingerprints.
- For stubborn dirt on the stainless steel bracelet, a slightly damp klud kan bruges, efterfulgt af øjeblikkelig tørring.
- Undgå at bruge skrappe kemikalier, opløsningsmidler eller slibende rengøringsmidler, da disse kan beskadige urets finish.
Udskiftning af batteri
The watch is powered by one product-specific battery (included). When the watch stops or the second hand begins to jump erratically (indicating low battery), it is time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is maintained.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Uret går ikke eller går periodisk. | Low or dead battery. Crown is pulled out. | Replace battery (professional recommended). Push crown fully in. |
| Day/Date not changing at midnight. | Tiden er indstillet forkert (AM/PM). | Advance time by 12 hours. Reset time, ensuring day/date changes at 12 AM. |
| Kondensation under krystal. | Vandindtrængen. | Seek professional service immediately to prevent damage. Avoid extreme temperature changes. |
Specifikationer
- Modelnummer: TW2T50400JT
- Æske diameter: 41 mm
- Bevægelse: Analog-kvarts
- Vandtæthed: 30 meter (100 fod)
- Armbånd materiale: Rustfrit stål
- Bracelet Width: 21 mm
- Armbåndets pasform: Op til 8 cm håndledsomkreds
- Dial Features: Black dial, partial Roman numerals, day and date window at 3 o'clock
- Batteri: 1 produktspecifikt batteri (inkluderet)
- Fabrikant: Timex Corporation- Cebu
- Dato først tilgængelig: 13. april 2019
Garanti og support
For garantioplysninger og kundesupport henvises til den officielle Timex webwebstedet eller kontakt Timex kundeservice direkte. Gem din købsbevis til garantikrav.
Du kan også finde yderligere information og support på Timex-butik på Amazon.
