Zacurate 500DL

Zacurate Pro Series 500DL Fingertip Pulse Oximeter User Manual

Blood Oxygen Saturation Monitor with Silicone Cover, Batteries and Lanyard

1. Introduktion

The Zacurate Pro Series 500DL Fingertip Pulse Oximeter is designed for sports enthusiasts, pilots, and anyone needing to monitor their SpO2 (blood oxygen saturation levels) and PR (Pulse Rate) on the go. This device provides accurate and reliable readings quickly and conveniently.

Zacurate Pro Series 500DL Pulse Oximeter

Figure 1: Zacurate Pro Series 500DL Fingertip Pulse Oximeter

2. Pakkens indhold

Your Zacurate Pro Series 500DL package includes the following items:

  • Zacurate Pro Series 500DL fingerspidspulsoximeter
  • Silikone Cover
  • 2 x AAA batterier
  • Snor
  • Brugervejledning (dette dokument)
Zacurate Pulse Oximeter package contents including device, batteries, silicone cover, and lanyard

Figure 2: All items included in the Zacurate Pro Series 500DL package.

3. Opsætning

3.1 Batteriinstallation

Enheden kræver to AAA-batterier (medfølger). Sådan installeres:

  1. Åbn batteridækslet på bagsiden af ​​enheden.
  2. Insert the two AAA batteries according to the polarity indicators (+/-) inside the compartment.
  3. Luk batteridækslet forsvarligt.
Image showing the battery compartment of the pulse oximeter with two AAA batteries inserted.

Figur 3: Batterirum med AAA-batterier.

3.2 Fastgørelse af snoren

The included lanyard can be attached for convenience and portability:

  1. Insert the loop of the lanyard into the lanyard holes on the device.
  2. Thread the lanyard strap through the loop.
  3. Pull the lanyard strap until it is tight and secured.
Diagram showing three steps to attach the lanyard to the pulse oximeter.

Figure 4: Lanyard attachment steps.

4. Betjeningsvejledning

4.1 Tage en læsning

To obtain an accurate reading:

  1. Ensure your hands and fingers are warm. Rubbing your hands together can help improve blood flow.
  2. Clip the oximeter onto your finger (preferably the index or middle finger) with the LED display facing you.
  3. Tryk én gang på tænd/sluk-knappen for at tænde enheden.
  4. Keep your hand still. Movement can cause the device to reset its reading.
  5. Wait approximately 10-30 seconds for the readings to stabilize on the LED display.
Zacurate Pulse Oximeter showing labeled parts including SpO2, Pulse Rate, and One-Button Operation.

Figure 5: Pulse Oximeter display and components.

4.2 Fortolkning af displayet

The LED display shows two main values:

  • SpO2 (%): Blood Oxygen Saturation Level. The Zacurate Pro Series 500DL can display SpO2 up to 100%.
  • PR (BPM): Pulse Rate (beats per minute).

5. Important Notes for Accurate Readings

  • Low Blood Perfusion: If blood flow in your finger drops below a certain level (e.g., due to cold hands), the oximeter may not function accurately. Ensure hands are warm before taking a reading.
  • Bevægelse: Any movement during a reading can cause the device to reset or provide inaccurate results. Remain still.
  • Nail Polish/Fake Fingernails: Nail polish and artificial fingernails may cause false readings. If possible, use an unpolished nail or consider another application site.
  • Brug af enheden: This device is for Sports & Aviation use only and is not a medical device. Consult a healthcare professional for medical advice.

6. Vedligeholdelse

6.1 Rengøring

To clean the pulse oximeter, wipe the surface with a soft cloth dampened with alcohol. Do not immerse the device in water or any cleaning solution.

6.2 Opbevaring

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided silicone cover to protect it from dirt and physical damage.

7. Fejlfinding

ProblemMulig årsagLøsning
No display/readingLow batteries; Incorrect battery installation; Finger not inserted correctly; Device malfunction.Replace batteries; Reinsert batteries correctly; Re-position finger; Contact support.
Upræcis læsningCold fingers; Movement during reading; Nail polish/fake nails; Low blood perfusion.Warm hands; Remain still; Remove nail polish/use different finger; Ensure good blood flow.
Slow reading/stabilizationDevice optimizing sensitivity; User's physiological factors.Wait up to 30 seconds for readings to stabilize.

8. Specifikationer

FeatureDetalje
Modelnummer500DL
Produktdimensioner2.25 x 1.25 x 1.25 tommer
Vægt3.2 ounce
Målenøjagtighed+/-2 %
Måleområde (SpO2)70-100 %
Measuring Range (PR)30-250 BPM
Batterier2 x AAA (inkluderet)
Anbefalet alder12 år og derover

9. Garanti og support

The Zacurate Pro Series 500DL comes with a 12-month warranty. For technical support or any questions regarding your device, please contact Zacurate's USA-based technical support team.

Telefon: 832-939-8290

E-mail: cs@beyondmedshop.com

Webwebsted: zacurate.com

Du kan også henvende dig til den officielle Brugervejledning (PDF) for yderligere detaljer.

Relaterede dokumenter - 500DL

Preview Ofte stillede spørgsmål om Zacurate pulsoximeter
Ofte stillede spørgsmål om Zacurate fingerspidspulsoximeteret, der dækker dets funktioner, brug, batterilevetid, nøjagtighed og egnethed til forskellige forhold og brugere.
Preview Zacurate 500DL fingerspidspulsoximeter Hurtigstartguide og fejlfinding
Lynstartguide og fejlfindingsløsninger til Zacurate Pro Series 500DL fingerspidspulsoximeteret. Lær, hvordan du får nøjagtige SpO2- og pulsfrekvensaflæsninger, og hvordan du løser almindelige problemer.
Preview Zacurate pulsoximeter – ofte stillede spørgsmål og brugervejledning
Ofte stillede spørgsmål og svar om Zacurate fingerspidspulsoximetre, der dækker batterilevetid, brug, nøjagtighed og normale aflæsninger. Lær om SpO2- og pulsmåling.
Preview Installationsvejledning til Zacurate 500BL pulsoximeterbatteri
Trinvise instruktioner til installation af AAA-batterier i Zacurate 500BL fingerspidspulsoximeteret, inklusive vigtige bemærkninger om batteriernes retning og en detaljeret beskrivelse af processen.
Preview Zacurate 500CL fingerspidspulsoximeter brugermanual - SpO2- og pulsmåling
Omfattende brugermanual til Zacurate 500CL fingerspidspulsoximeteret. Lær, hvordan du bruger, vedligeholder og forstår SpO2- og pulsmålinger til sport og luftfart.