1. Introduktion
This manual provides essential information for the safe and effective use of your MARS HYDRO TS600 100W LED Grow Light. Please read all instructions carefully before installation and operation. This LED grow light is designed to provide full-spectrum illumination for indoor plants, supporting all stages of growth from seedling to bloom.
2. Sikkerhedsoplysninger
- Sørg for, at strømforsyningen voltage is within the specified range (110-130V). Incorrect voltage kan beskadige produktet.
- Do not touch the light when it is working.
- Suitable for operation in ambient temperatures not exceeding 40°C.
- Velegnet til damp locations, but not for direct water exposure.
- Not suitable for intracanopy applications.
- Afbryd altid strømmen før rengøring eller vedligeholdelse.
- Opbevares utilgængeligt for børn.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x MARS HYDRO TS600 LED Grow Light
- 2 x Adjustable Rope Hangers
- 2 x Hanging Kits (steel wire hangers)
- 1 x strømkabel
- 1 x brugermanual

Figure 3.1: Contents of the MARS HYDRO TS600 package.
4. Opsætning
4.1 Mounting the Grow Light
- Attach the hanging kits (steel wire hangers) to the designated points on the top of the TS600 LED Grow Light.
- Connect the adjustable rope hangers to the steel wire hangers.
- Hang the light securely from a sturdy support structure within your grow tent or growing area.
- Adjust the height of the light using the rope hangers to achieve the desired distance from your plants.

Figure 4.1: MARS HYDRO TS600 LED Grow Light with included hanging accessories.
4.2 Tilslutning af strøm
Plug the provided power cord into the light and then into a compatible 110-130V power outlet. Ensure the connection is secure.
5. Betjeningsvejledning
5.1 Light Spectrum
The TS600 features a full-spectrum LED design, including 730-740nm Red IR, 3200-4200Knm, and 5200-6800Knm spectra. This combination provides optimal light for all plant stages, promoting rapid growth from seed to flower and increasing yield and crop quality. Over 90% of the light energy can be absorbed by plants.

Figure 5.1: Full spectrum output of the TS600 LED Grow Light.
5.2 Recommended Hanging Heights
Adjust the light's height based on the plant's growth stage to optimize light intensity and coverage:
- Frøplante Stage: Approximately 24 inches (60 cm) above the plants.
- Vegetativ Stage: Approximately 14 inches (36 cm) above the plants.
- Blomstrende Stage: Approximately 12 inches (30 cm) above the plants.

Figure 5.2: Recommended hanging heights for different plant growth stages.
5.3 Coverage Area
The TS600 is ideal for a 2x2 ft (60x60cm) grow tent, providing uniform light distribution and maximizing plant yield. When paired with a high reflectivity tent, it efficiently harnesses light for robust growth.

Figure 5.3: PPFD (Photosynthetic Photon Flux Density) map for TS600 in a 2x2ft grow tent.
6. Vedligeholdelse
6.1 Rengøring
Ensure the light is unplugged and cool before cleaning. Gently wipe the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
6.2 Varmeafledning
The TS600 features a high-reflective and noise-free fanless design with aluminum material for efficient heat dissipation. This design reduces heat loss and increases light intensity, allowing plants to receive more energy without the risk of burning.

Figure 6.1: Advanced cooling system for the TS600.
7. Fejlfinding
If you encounter any issues with your MARS HYDRO TS600 LED Grow Light, please refer to the following general advice:
- Lyset tænder ikke: Check the power cord connection and ensure the outlet is functional. Verify the voltage er inden for det angivne område.
- Reduced light output: Ensure the light surface is clean and free from dust or debris.
- Overophedning: While designed for efficient heat dissipation, ensure adequate airflow around the unit. Do not obstruct the heat sink.
For persistent issues, please contact MARS HYDRO customer support.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | TS600 |
| Wattage | 100 watt |
| Input bindtage | 110-130V |
| Lysstyrke | 12410 Lumen |
| Lyskildetype | LED |
| Spektrum | Full Spectrum (730-740nm Red IR/3200-4200Knm/5200-6800Knm) |
| Kernedækning | 1.5 fod x 1.5 fod |
| Max dækning | 2 fod x 2 fod |
| PPE | 2.0 umol/J |
| Max udbytte | 1.8g/W |
| Varens vægt | 2 pund |
| Produktdimensioner | 12.2 cm L x 14 cm B x 1.4 cm H |
| Materiale | Aluminium |
| Certificering | CE |
9. Garanti og support
The MARS HYDRO TS600 LED Grow Light comes with a 5-year warranty, as indicated in product information. For warranty claims, technical support, or any inquiries, please contact MARS HYDRO customer service.
You can also visit the official MARS HYDRO store for more products and information: MARS HYDRO Store
10. Produktet er slutview Video
Video 10.1: An official MARS HYDRO video showcasing the customized plant growing system kit, including the TS600 LED Grow Light and its application in various grow tent sizes.





