POOLEX Silverline 90 Poolvarmepumpe Brugermanual

1. Introduktion

This user manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your POOLEX Silverline 90 Pool Heat Pump, model PC-SLP090. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the unit.

2. Sikkerhedsoplysninger

Always adhere to local electrical codes and regulations. Installation must be performed by a qualified professional. Failure to follow these instructions may result in property damage, serious injury, or death.

• Ensure the power supply is disconnected before any maintenance or service.
• Do not operate the heat pump if any part is damaged or missing.
• Hold børn og kæledyr væk fra enheden under drift.
• Korrekt jordforbindelse er afgørende for at forhindre elektrisk stød.
• Bloker ikke luftindtags- eller udstødningsventilerne.

3. Produktet er slutview og komponenter

The POOLEX Silverline 90 is a high-performance heat pump designed for heating swimming pools. It features a Mitsubishi compressor and a double-spiral titanium exchanger for efficient heat transfer.

Figur 3.1: Forside view of the POOLEX Silverline 90 heat pump, showing the main unit with the POOLEX Silverline logo and various indicators. This image illustrates the compact design and primary external features of the heat pump.

Figure 3.2: The POOLEX Silverline 90 heat pump, highlighting its compatibility with pools up to 45m³ and the integrated Touch & Go control system. This image emphasizes the user-friendly interface and capacity suitability.

Figure 3.3: Key features of the POOLEX Silverline 90 heat pump, including 6 capacities up to 85m³, titanium exchanger, power range of 5.5 to 18 kW, and anti-corrosion properties. This graphic summarizes the technical advantages of the unit.

Figure 3.4: Accessories included with the POOLEX Silverline 90 heat pump: maintenance cover, anti-vibration support kit, 10-meter extension cable, condensate drainage hose, and 50mm PVC connectors. This image details the complete package for installation and maintenance.

Figure 3.5: The POOLEX Silverline heat pump's energy efficiency, demonstrating up to 80% savings compared to traditional heating methods. This image highlights the economic benefit of using the heat pump.

Figure 3.6: The POOLEX Silverline 90 heat pump uses R410 ecological refrigerant, emphasizing its environmental friendliness. This image points out the type of refrigerant used and its eco-conscious design.

Figure 3.7: The POOLEX Silverline heat pump offers 6 capacities for pools up to 85m³, with a power range of 5.5 to 18 kW. This image illustrates the versatility and scalability of the heat pump series.

4. Opsætning og installation

4.1 Valg af sted

Choose a well-ventilated outdoor location, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow (minimum 50cm from walls or other obstructions). The ground must be level and capable of supporting the unit's weight (49 kg).

4.2 VVS-tilslutning

1. Tilslut varmepumpen til din pools filtreringssystem efter filteret og før eventuelle kemiske indsprøjtningspunkter.
2. Use the provided PVC connectors (Ø 50mm) for water inlet and outlet.
3. Sørg for, at alle forbindelser er vandtætte for at forhindre lækager.
4. Install a bypass valve system to allow for maintenance without draining the pool.

4.3 Elektrisk tilslutning

Electrical installation must be performed by a certified electrician in accordance with local regulations.

• The unit requires an electrical power supply (Type: Electric).
• Ensure the circuit is protected by a suitable circuit breaker and residual current device (RCD).
• Jordforbind enheden korrekt.
• Connect the wired control extension (10m) if using the remote panel.

4.4 Første opstart

1. Ensure the pool pump is running and water is flowing through the heat pump.
2. Tænd for strømforsyningen til varmepumpen.
3. Set the desired water temperature using the LCD control panel.
4. Allow several hours or days for the pool water to reach the set temperature, depending on initial water temperature and ambient conditions.

5. Betjeningsvejledning

5.1 Control Panel (Touch & Go)

The heat pump is equipped with an LCD control panel featuring Touch & Go technology for easy operation. Refer to the specific instructions provided with the control panel for detailed navigation.

5.2 Temperaturindstilling

Use the up/down arrows on the control panel to adjust the desired pool water temperature. The unit will automatically operate to maintain this temperature.

5.3 driftstilstande

The heat pump primarily operates in heating mode. It will automatically turn on when the pool water temperature drops below the set point and turn off once the set point is reached.

5.4 Wi-Fi Module (Optional)

An optional Wi-Fi module is available for remote control and monitoring. Consult the Wi-Fi module's separate manual for installation and operation instructions.

6. Vedligeholdelse

6.1 Regelmæssig rengøring

• Keep the area around the heat pump clear of debris, leaves, and other obstructions.
• Clean the evaporator coil regularly with a soft brush or low-pressure water to ensure efficient airflow.
• Wipe down the exterior casing med annonceamp klæde.

6.2 Vinterisering

Before winter or prolonged periods of non-use, it is essential to properly winterize the heat pump:

1. Afbryd strømforsyningen.
2. Drain all water from the heat pump's plumbing system to prevent freezing damage.
3. Cover the unit with the provided maintenance cover or a suitable protective cover.

6.3 Kondensatdræning

Ensure the condensate drainage hose is clear and properly routed to allow water to drain away from the unit's base.

7. Fejlfinding

For issues not listed or if problems persist, contact a qualified service technician or POOLEX customer support.

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Poolstar webwebsted. Gem din købsbevis til garantikrav.

Included accessories: Anti-vibration support kit, PVC connectors (Ø 50mm 1½''), condensate drainage hose, multi-language user manual, wired control extension (10m).