Bresser MeteoTemp 7007510 Wireless Weather Station

Indledning

This manual provides detailed instructions for the Bresser MeteoTemp 7007510 Wireless Weather Station. This device offers comprehensive weather information including indoor and outdoor temperature, humidity, atmospheric pressure, moon phases, and graphical weather forecasts. Please read this manual carefully before operating the device to ensure correct usage and optimal performance.

Billede: Forside view of the Bresser MeteoTemp 7007510 Weather Station displaying various weather parameters.

Opsætning

1. Pakkens indhold

Før du starter, skal du sørge for at alle ting er til stede:

• Hovedvejrstationsenhed
• Trådløs udendørs sensor
• Strømadapter
• Brugervejledning (dette dokument)

2. Batteriinstallation

Hovedenhed: The main unit can be powered by the included AC adapter or 3x AA batteries (not included). For continuous display illumination, use the AC adapter. If using batteries, the display will only illuminate briefly when a button is pressed to conserve power.

1. Åbn batteridækslet på bagsiden af ​​hovedenheden.
2. Insert 3x AA batteries, observing the correct polarity (+/-).
3. Luk batterirummets dæksel.
4. Optionally, connect the AC adapter to the main unit and a power outlet.

Udendørs sensor: The outdoor sensor requires 2x AA batteries (not included).

1. Åbn batteridækslet på bagsiden af ​​udendørssensoren.
2. Insert 2x AA batteries, observing the correct polarity (+/-).
3. Luk batterirummets dæksel.

Billede: Bagside view of the weather station, highlighting the battery compartment and integrated stand.

3. Sensorplacering

Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature and humidity readings. Avoid placing it near heat sources or reflective surfaces. The maximum transmission range is approximately 30 meters (100 feet) in open air. Walls and other obstacles may reduce this range.

4. Indledende parring

After inserting batteries into both the main unit and the outdoor sensor, the main unit will automatically search for the sensor signal. This process may take a few minutes. Once connected, the outdoor temperature and humidity will appear on the main unit's display.

Betjeningsvejledning

1. Display overview

The color display shows various information:

• Indendørs temperatur og fugtighed
• Udetemperatur og fugtighed
• Tid og dato
• Atmosfærisk tryk
• Månefaser
• Graphical Weather Forecast
• Min/Max Værdi Hukommelse

Image: Close-up of the weather station's color display, showing indoor/outdoor readings, time, and forecast icons.

2. Knapfunktioner

The main unit features several control buttons:

• KØRSELSVEJLEDNING: Switches between display modes, enters setting mode.
• OP (▲): Adjusts values in setting mode, displays maximum values.
• NED (▼): Adjusts values in setting mode, displays minimum values.
• CH: Switches between outdoor sensors (if multiple are connected).
• BØLGE: Manually initiates DCF time signal reception.
• ALARM/SNOOZE: Sets or deactivates the alarm, activates snooze function.

3. Indstilling af tid og dato

1. Tryk og hold på MODE -knappen i cirka 3 sekunder for at gå ind i tidsindstillingstilstand.
2. Timecifret vil blinke. Brug UP or NED knapper for at justere timen.
3. Trykke MODE again to confirm and move to the next setting (minutes, year, month, day).
4. Repeat step 2 and 3 for each setting.
5. Trykke MODE en sidste gang for at afslutte indstillingstilstand.

4. Alarm funktion

1. Tryk på ALARM/SNOOZE knappen én gang for at vise alarmtidspunktet.
2. Tryk og hold på ALARM/SNOOZE knappen i 3 sekunder for at gå ind i alarmindstillingstilstand.
3. Juster time og minutter ved hjælp af UP or NED knapper, og bekræft hver med ALARM/SNOOZE.
4. For at aktivere/deaktivere alarmen skal du trykke på ALARM/SNOOZE Tryk kortvarigt på knappen, når alarmtidspunktet vises. Et alarmikon vil vises/forsvinde.

5. Vejrudsigt

The weather station provides a graphical weather forecast for the next 12-24 hours based on atmospheric pressure changes. The icons displayed include Sunny, Partly Cloudy, Cloudy, Rainy, and Snowy. This is a prediction and may not always perfectly match actual weather conditions.

6. Moon Phases

The display shows the current moon phase, which updates automatically based on the set date.

Opretholdelse

1. Udskiftning af batteri

Udskift batterierne i både hovedenheden og udendørssensoren, når indikatoren for lavt batteriniveau vises på displayet. Udskift altid alle batterier på samme tid med nye af samme type.

2. Rensning

Rengør enheden med en blød, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige displayet ellerasing. Ensure no moisture enters the device.

3. Opbevaring

If the device will not be used for an extended period, remove all batteries to prevent leakage and damage. Store the unit in a cool, dry place.

Fejlfinding

• Ingen visning: Check battery polarity and ensure batteries are fresh. If using the AC adapter, ensure it is properly connected to a working power outlet.
• Udendørssensoren forbinder ikke:
  • Ensure the outdoor sensor batteries are correctly installed and fresh.
  • Move the outdoor sensor closer to the main unit.
  • Tryk på CH knappen på hovedenheden for manuelt at søge efter sensoren.
  • Remove batteries from both units, wait a few minutes, then reinsert batteries into the outdoor sensor first, then the main unit.
• Upræcise læsninger:
  • Ensure the outdoor sensor is placed in a shaded, well-ventilated area, away from direct sunlight, heat sources, or reflective surfaces.
  • Verify that the main unit is not near strong electromagnetic interference.
• DCF Time Signal Not Received:
  • Place the main unit away from electronic devices that may cause interference.
  • Manually initiate signal reception by pressing the BØLGE knap.
  • Reception may be affected by geographical location or atmospheric conditions.

Specifikationer

Garanti og support

Bresser products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Bresser webwebstedet. Behold din købskvittering som købsbevis.