EDM RGB LED-spotlight 10W 806 Lumen LUMECO Model 70329 Brugermanual

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EDM RGB LED Spotlight 10W 806 Lumen LUMECO Model 70329. Please read this manual thoroughly before using the product and retain it for future reference.

The EDM RGB LED Spotlight is designed for various lighting applications, offering multi-color illumination and energy efficiency. It features a robust design suitable for outdoor use (IP65 rated) and comes with a remote control for convenient operation.

2. Sikkerhedsinstruktioner

• Elektrisk sikkerhed: Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter. Sørg for, at strømforsyningen er afbrudt før installation eller vedligeholdelse.
• Voltage: This spotlight operates on 220 Volts. Verify your power supply matches this requirement.
• Jording: Ensure the spotlight is properly grounded to prevent electrical shock.
• Vandtæthed: The spotlight is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it should not be submerged in water.
• Varme: Do not cover the spotlight during operation, as this can lead to overheating and damage. Maintain adequate ventilation around the unit.
• Lyskilde: Se ikke direkte ind i LED-lyskilden, når den er tændt, da dette kan forårsage øjenbelastning eller skader.
• Børn: Keep the product and its remote control out of reach of children.

3. Pakkens indhold

Tjek venligst pakken for følgende varer:

• 1 x EDM RGB LED Spotlight 10W 806 Lumen LUMECO (Model 70329)
• 1 x fjernbetjening
• 1 x Mounting Bracket (pre-attached)

4. Produktet er slutview

The EDM RGB LED Spotlight features a durable construction with a glass front and aluminum housing, designed for longevity and efficient heat dissipation. The included remote control allows for easy adjustment of colors and lighting modes.

Figur 1: EDM RGB LED Spotlight (Model 70329) shown with its accompanying remote control. The spotlight features a black aluminum housing and a clear glass front, with exposed wiring for connection.

Figur 2: EDM RGB LED Spotlight and remote control, highlighting key features such as 10W power, IP65 outdoor rating, 806 lumens brightness, and 21 high-quality LEDs. The remote shows buttons for color selection and lighting modes.

5. Opsætning

5.1 Mounting the Spotlight

1. Vælg placering: Select a suitable mounting location that can support the weight of the spotlight and provides the desired illumination angle. Ensure the location is accessible for wiring and maintenance.
2. Sikkert beslag: Use appropriate screws and anchors (not included) to securely fasten the pre-attached mounting bracket to the desired surface.
3. Juster vinkel: Loosen the screws on the sides of the mounting bracket to adjust the spotlight's angle. Tighten the screws firmly once the desired angle is achieved.

5.2 Elektrisk tilslutning

WARNING: Ensure power is OFF at the circuit breaker before proceeding with electrical connections.

1. Identificér ledninger: The spotlight comes with three wires: Live (typically brown or black), Neutral (typically blue), and Ground (typically green/yellow).
2. Tilslut ledninger: Connect the spotlight's wires to your main power supply wires according to standard electrical practices (Live to Live, Neutral to Neutral, Ground to Ground). Use appropriate waterproof connectors for outdoor installations.
3. Isoler forbindelser: Ensure all connections are properly insulated and protected from moisture, especially for outdoor use.
4. Gendan strøm: Once all connections are secure and insulated, restore power at the circuit breaker.

6. Betjeningsvejledning

The EDM RGB LED Spotlight is controlled using the included infrared remote control. Ensure the remote control is pointed towards the spotlight's sensor for optimal response.

6.1 Fjernbetjeningsfunktioner

• TIL/FRA: Tryk på ON button to turn the spotlight on, and SLUKKET for at slukke den.
• Justering af lysstyrke: Brug Lysstyrke op () og Lysstyrke ned () buttons to increase or decrease the light intensity.
• Farvevalg: Tryk på R (Rød), G (Grøn), B (Blue), or W (White) buttons for direct color selection. Additional color buttons provide various shades.
• Dynamiske tilstande:
  • BLITZ: Skifter hurtigt mellem farver.
  • STROBE: Flashes a single color on and off.
  • FALME: Jævne overgange mellem farver.
  • GLAT: A slower, more gradual transition between colors compared to FADE.

Note: While the product specifications mention 'App' as a control method, the primary control for this model is via the included infrared remote control as depicted in the product images.

7. Vedligeholdelse

• Rensning: Disconnect power before cleaning. Wipe the spotlight's glass and housing with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Periodically inspect the power cable and connections for any signs of damage or wear. Ensure the mounting bracket remains secure.
• lysdioder: The LED light source is designed for long life and is not user-replaceable.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact EDM customer service directly. Keep your purchase receipt as proof of purchase.