1. Produktet er slutview
The SHARP SPC736 Dual Alarm Clock features a jumbo 1.8-inch white LED display with a faux wood finish, designed for clear visibility and a modern aesthetic. It includes dual alarm settings, a 3-step dimmer control for adjustable brightness, and a battery backup system to maintain time and alarm settings during power outages.
Billede: Forside view of the SHARP SPC736 Dual Alarm Clock, displaying 12:08 PM. The clock features a large white LED display set against a faux wood grain panel, with control buttons visible on the top edge.
2. Opsætning
2.1 Strømforsyning til enheden
The SHARP SPC736 alarm clock operates primarily on AC power. Connect the provided AC adapter to the clock and plug it into a standard electrical outlet.
2.2 Installation af batteribackup
For battery backup functionality, install 2 x AAA batteries (not included) into the battery compartment located on the bottom of the unit. The battery backup ensures that time and alarm settings are retained during a power interruption, though the display will not illuminate.
2.3 Indstilling af starttidspunkt
- Tryk og hold på TIDSINDSTILLING button (usually indicated by a clock icon) until the display flashes.
- Brug HR (Time) og MIN (Minute) buttons to adjust the time. Pay attention to the PM indicator for correct AM/PM setting.
- Tryk på TIDSINDSTILLING knappen igen for at bekræfte og afslutte tidsindstillingstilstanden.
3. Betjeningsvejledning
3.1 Indstilling af alarmer (Alarm 1 og Alarm 2)
This clock features two independent alarms. Follow these steps for each alarm:
- Tryk og hold på ALARM 1 or ALARM 2 button (indicated by a bell icon) until the alarm time flashes.
- Brug HR og MIN buttons to set the desired alarm time. Ensure the AM/PM indicator is correct.
- Tryk på det tilsvarende ALARM button again to confirm the setting. The alarm indicator will appear on the display.
- For at aktivere/deaktivere en alarm skal du trykke på ALARM 1 or ALARM 2 button briefly. The alarm indicator will turn on or off.
3.2 Snooze -funktion
Når en alarm lyder, skal du trykke på den store SLUM knappen øverst på uret. Alarmen stopper midlertidigt og lyder igen efter cirka 9 minutter.
3.3 Lysdæmperstyring
The clock features a 3-step dimmer control to adjust the brightness of the LED display. Repeatedly press the DIMMER button (indicated by a sun icon) to cycle through high, medium, low, and off brightness settings.
4. Vedligeholdelse
4.1 Rengøring
To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or display.
4.2 Udskiftning af batteri
Hvis uret oplever hyppige strømafbrydelsertages or if the display does not retain time during brief disconnections, it may be time to replace the AAA backup batteries. Ensure the clock is connected to AC power before replacing batteries to avoid losing current time settings.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Displayet er tomt. | No AC power; Dimmer set to 'off'. | Ensure AC adapter is securely plugged in. Press the DIMMER button to cycle through brightness settings. |
| Alarmen lyder ikke. | Alarm not activated; Alarm volume too low (if applicable); Incorrect alarm time set. | Verify alarm indicator is on. Check alarm time for AM/PM accuracy. |
| LED segments are dim or missing. | LED component degradation over time. | This may indicate a component failure. If within warranty, contact customer support. Otherwise, replacement may be necessary. |
| Tid/indstillinger mistet efter strømafbrydelsetage. | Backup-batterierne er døde eller ikke installeret. | Install new 2 x AAA batteries in the battery compartment. |
6. Specifikationer
- Mærke: Skarp
- Model: SPC736
- Skærmtype: Digital LED
- Skærmstørrelse: 1.8 inches (Jumbo)
- Skærmfarve: Hvid
- Slutte: Faux træ
- Strømkilde: AC Powered with 2 x AAA Battery Backup (batteries not included)
- Særlige funktioner: Dual Alarms, 3-Step Dimmer Control, Snooze Function
- Dimensioner: Cirka 8 x 5.6 x 3 tommer
- Vægt: Cirka 12.8 ounce
- UPC: 049353000275
7. Garanti og support
For detailed warranty information and customer support, please refer to the documentation included with your product at the time of purchase or visit the official Sharp website. This manual provides general operational guidelines and does not supersede specific warranty terms.
Note: No official seller videos were available for embedding based on the provided data. For additional product demonstrations or support, please check the manufacturer's official channels.
