Indledning
This manual provides detailed instructions for the safe and effective use of your NEC RE0209 LED Ceiling Light Remote Control. Please read this manual thoroughly before use and retain it for future reference. This remote control is designed for specific NEC LED ceiling light fixtures and offers functions such as dimming, color temperature adjustment, and timer settings.
Important Compatibility Notice
This product is a replacement part. It cannot be used with devices other than compatible fixtures. Please confirm the product number of your lighting fixture before purchasing and using this remote control.

Image: A warning message in Japanese stating that the product is a replacement part and must only be used with compatible fixtures, urging users to confirm the product number before purchase.
Opsætning
1. Batteriinstallation
The NEC RE0209 remote control requires two (2) AAA alkaline batteries (not included). Follow these steps to install them:
- Find batterirummets dæksel på bagsiden af fjernbetjeningen.
- Skub dækslet nedad eller i den retning, der er angivet med en pil, for at åbne det.
- Isæt to (2) AAA alkaliske batterier, og sørg for, at de positive (+) og negative (-) poler er korrekt justeret med markeringerne inde i batterirummet.
- Sæt batteridækslet på igen ved at skubbe det på plads, indtil det klikker sikkert.
Note: Always use new alkaline batteries for optimal performance. Do not mix old and new batteries, or different types of batteries.
2. Channel Selection (if applicable)
Some lighting fixtures may require channel selection to ensure proper communication with the remote. The RE0209 remote control features CH1 and CH2 buttons. If your light fixture has a channel setting, ensure the remote's channel matches the fixture's channel. Refer to your ceiling light's manual for specific channel setting instructions.
Betjeningsvejledning
Gør dig bekendt med knapperne og deres funktioner som vist nedenfor:

Image: A detailed diagram of the NEC RE0209 remote control, labeling each button and explaining its function in Japanese, including dimming, color temperature, and timer settings.
Grundlæggende funktioner
- Power On/Off (点灯/常夜灯/OFF): The central button cycles through lighting modes: Full Light (点灯) → Night Light (常夜灯) → SLUKKET. The light will turn on at the brightness level used last. This button also glows in the dark for easy visibility.
- Dimming (明るく/暗く): Brug Up (明るく) og Down (暗く) knapper til at justere lysstyrkeniveauet.
- Briefly press to change brightness by one level (Main light: 10 levels, Night light: 7 levels).
- Press and hold for 2 seconds or more for continuous dimming.
- Color Temperature Adjustment (白色/暖色): Brug Left (白色) og Right (暖色) buttons to switch the light color.
- Left (白色): Adjusts towards a cooler, daylight white color.
- Right (暖色): Adjusts towards a warmer, incandescent-like color.
- There are 5 levels of color temperature adjustment.
Avancerede funktioner
- Sleep Timer (スリープタイマー 60分/30分): Press this button to set an OFF timer for either 60 minutes or 30 minutes. The light will automatically turn off after the selected duration.
- Easy Guard Timer / Full Light (長押し全灯 / 留守番):
- Easy Guard Timer (留守番): When activated, the lighting fixture will automatically turn on and off repeatedly during your absence, simulating occupancy.
- Full Light (長押し全灯): Press and hold this button for 2 seconds or more to turn on the light at its full brightness setting.
- Channel Selection (CH1/CH2): Use these buttons to select the operating channel for the remote control, if your lighting fixture supports multiple channels.
Opretholdelse
Udskiftning af batteri
When the remote control's range decreases or it becomes unresponsive, it's time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
- Udskift altid begge batterier på samme tid.
- Bortskaf brugte batterier i henhold til lokale regler.
Rensning
Sådan rengøres fjernbetjeningen:
- Tør overfladen af med en blød, tør klud.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the remote's finish or internal components.
Opbevaring
Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.
Fejlfinding
Hvis din fjernbetjening ikke fungerer som forventet, kan du se følgende almindelige problemer og løsninger:

Image: A troubleshooting guide in Japanese for the NEC RE0209 remote control, covering common issues like unresponsiveness and solutions related to compatibility, batteries, interference, and channel settings.
If the Remote Control Does Not Work or Respond:
Almindelige problemer:
- Kompatibilitet: Is the remote control compatible with your lighting fixture? This remote can only be used with compatible NEC LED ceiling lights. Please verify your fixture's model number.
- Batteriafladning: Are the batteries depleted? Replace them with new AAA alkaline batteries.
- Batteripolaritet: Is the positive (+) and negative (-) direction of the batteries inserted correctly? Reinsert them if necessary.
- Interferens: Are there electronic devices such as microwave ovens, audio equipment, or cordless phones nearby? These devices can cause electromagnetic interference. Try moving them away from the remote control and the lighting fixture.
For Lighting Fixtures:
- Vægkontakt: Is the wall switch for the lighting fixture turned ON? The light will not turn on if the wall switch is OFF.
- Channel Mismatch: Are the channels of the remote control and the lighting fixture matched? If they do not match, the remote will not respond. (This applies to remotes with a channel setting function.)
- Fjernnulstilling: Have you tried resetting the remote control? If new batteries do not resolve the issue, press the reset button on the remote (if available).
Specifikationer
| Mærke | NEC |
| Modelnummer | RE0209 |
| Dimensioner | 20.5 x 7.3 x 5.3 cm |
| Vægt | 110 g |
| Funktioner | Dimming, Color Temperature Adjustment |
| Batteritype | 2 x AAA alkaliske batterier (medfølger ikke) |
Garanti og support
Specific warranty information for the NEC RE0209 remote control is not provided in the product details. For warranty claims, technical support, or further assistance, please contact the retailer where you purchased the product or refer to the official NEC webwebsted for kontaktoplysninger til kundeservice i din region.





