1. Vigtige sikkerhedsoplysninger
Læs og forstå alle instruktioner, inden installationen påbegyndes. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller personskade.
- All electrical work must be performed by a qualified, licensed electrician.
- Afbryd strømmen ved afbryderen før installation eller service.
- Ensure the mounting structure can support the weight of the fan (at least 35 lbs).
- Brug ikke ventilatoren med beskadigede vinger eller kabinet.
- Hold en minimumsafstand på 7 meter fra gulvet til bunden af ventilatorbladene.
- Ensure blades are at least 18 inches from any walls or obstructions.
- Denne ventilator er kun designet til indendørs brug.
2. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Motorhussamling
- Ventilatorblade (4)
- Nedstang
- Baldakin
- Monteringsbeslag
- Light Kit Assembly (with integrated LED)
- Fjernbetjening og modtager
- Hardwarepakke (skruer, skiver, trådmøtrikker)
3. Opsætning og installation
3.1 Tjekliste før installation
- Sluk for strømmen ved hovedafbryderen.
- Sørg for at have alt nødvendigt værktøj (skruetrækker, afisoleringstang, stige osv.).
- Confirm the ceiling junction box is rated for fan support.
3.2 Montering af ventilatoren
Attach the mounting bracket to the ceiling junction box. Secure the down rod to the motor housing, then carefully lift the fan assembly and hang it from the mounting bracket. It is recommended to have a second person assist during this step.
3.3 Ledningsinstruktioner
Connect the fan's electrical wires to the household wiring according to local electrical codes. Ensure all connections are secure. The remote receiver will be wired between the household supply and the fan motor/light kit. Consult a qualified electrician if you are unsure about any wiring steps.
3.4 Montering af knivene
Securely attach each of the four ABS blades to the motor housing using the provided screws. Ensure all screws are tightened to prevent wobble.
3.5 Installation af lyssættet
Connect the light kit wiring to the fan motor wiring. Secure the light kit assembly to the bottom of the fan motor housing. The integrated LED light does not require bulb installation.
4. Opsætning af fjernbetjening
4.1 Batteriinstallation
Open the battery compartment on the back of the remote control. Insert two AAA batteries (not included), ensuring correct polarity (+/-). Close the compartment.
4.2 Parring af fjernbetjeningen
The remote control and receiver are typically pre-paired from the factory. If the fan does not respond to the remote after installation, follow these steps:
- Ensure power to the fan is OFF at the wall switch or circuit breaker.
- Genopret strømmen til ventilatoren.
- Within 30 seconds of restoring power, press and hold the 'HI' button on the remote control for 5 seconds.
- The fan light should blink or the fan should briefly spin to indicate successful pairing.
5. Betjeningsvejledning
Use the remote control to operate your Lucci Air Aria ceiling fan.
5.1 Blæserhastighedskontrol
- Press 'HI' for high speed.
- Press 'MED' for medium speed.
- Press 'LOW' for low speed.
- Press 'OFF' to turn the fan off.
5.2 Lysstyring
- Press the light bulb button to turn the integrated LED light ON or OFF.
5.3 Reversible Motor Function (Summer/Winter Mode)
The fan features a reversible motor to optimize air circulation for different seasons. A switch on the fan's motor housing controls the direction of rotation.
- Sommertilstand (rotation mod uret): Skaber en nedadgående luftstrøm, hvilket giver en kølende effekt.
- Vintertilstand (rotation med uret): Creates an upward airflow, circulating warm air near the ceiling down into the room, which can help reduce heating costs.
To change the direction, ensure the fan is OFF and completely stopped. Locate the reverse switch on the motor housing (often near the down rod) and slide it to the desired position. Turn the fan back on.
6. Vedligeholdelse
6.1 Rengøring
To maintain the appearance and performance of your fan, regular cleaning is recommended.
- Always turn off power to the fan before cleaning.
- Brug en blød, damp en klud til at tørre ventilatorbladene og motorhuset af.
- Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
- Avoid getting water into the motor housing.
6.2 Generel pleje
Periodically check all screws and connections for tightness. Over time, vibrations can cause them to loosen. Tighten any loose screws to ensure safe operation and prevent excessive wobble.
7. Fejlfinding
If you experience issues with your fan, refer to the following common solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ventilator starter ikke | Ingen strømforsyning Løse ledningsforbindelser Fjernbetjeningen er ikke parret Motor overbelastningsbeskyttelse aktiveret | Kontroller afbryderen og vægafbryderen Verify all wiring connections are secure (consult electrician) Re-pair remote control (Section 4.2) Turn off power for 5 minutes, then restore |
| Lys virker ikke | No power to light kit Løse ledningsforbindelser Fjernbetjeningen er ikke parret | Kontroller afbryderen og vægafbryderen Verify light kit wiring connections Re-pair remote control (Section 4.2) |
| Fjernbetjening virker ikke | Døde batterier Fjernbetjeningen er ikke parret Forhindring mellem fjernbetjening og modtager | Udskift batterierne Re-pair remote control (Section 4.2) Ensure clear line of sight to fan receiver (if applicable) |
| Excessive fan wobble | Løse knivskruer Ubalancerede klinger Løst monteringsbeslag | Spænd alle knivskruer Use a blade balancing kit (sold separately) Ensure mounting bracket and down rod are secure |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Lucci Air |
| Modelnavn | Aria |
| Modelnummer | 21299401 |
| Farve | White with White High Performance ABS Blades |
| Størrelse | 48 tommer |
| Produktdimensioner | 48" D x 48" B x 13" H |
| Antal blade | 4 |
| Strømkilde | Elektrisk med ledning |
| Voltage | 110V |
| Wattage | 55 watt |
| Lys type | Integrated LED (18-watt) |
| Kontrolmetode | Fjernbetjening |
| Indendørs/Udendørs brug | Indendørs |
| Varens vægt | 12.6 pund |
| Fabrikant | Beacon belysning |
| UPC | 811769030319 |
9. Garantioplysninger
This Lucci Air Aria ceiling fan comes with a limited lifetime warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact customer support.
10. Kundesupport
For technical assistance, replacement parts, or warranty inquiries, please contact Beacon Lighting customer support. Have your model number (21299401) and purchase date available when contacting support.
- Fabrikant: Beacon belysning
- Webwebsted: Besøg Lucci Air Store på Amazon
- Kontaktoplysninger: Please refer to the contact details provided in your product packaging or the manufacturer's official webwebsted.
