1. Introduktion
This manual provides instructions for the proper use and maintenance of Avery Dennison Genuine Monarch 1131 White Labels. These labels are designed for use with the Monarch 1131 pricing gun, ensuring efficient and accurate labeling for various applications.
Image: A roll of Avery Dennison Monarch 1131 White Labels, with two smaller rolls in the foreground, illustrating the product packaging and label appearance.
2. Setup: Loading Labels
Proper loading of labels into your Monarch 1131 pricing gun is crucial for optimal performance. Follow these steps carefully:
Image: A detailed diagram illustrating the eight steps for loading labels into a Monarch 1131 pricing gun, showing the label roll, label guide, operating lever, brake wheel, feedwheel, and the path of the label strip.
- If labeler has no label guide: Snap label roll between hubs. Tear off and discard first twelve labels and backing paper.
If labeler has label guide: Snap label roll between hubs. Tear off and discard first twelve labels and backing paper. Then, insert label strip into guide slot as shown. - Squeeze and hold operating lever halfway, and feed label strip under brake wheels.
- Continue feeding label strip until about twelve labels come out here. Release operating lever.
a. Feed label strip up under plate until two labels come out here.
b. Squeeze operating lever halfway and rewind label roll until loop is removed.
- Grasp label strip and pull briskly toward operating lever. Discard separated labels.
- Tear backing paper as shown.
- Completely squeeze operating lever, exposing feedwheel. Insert backing paper into slot. When paper bows up, maintain finger pressure and release operating lever.
- Squeeze operating lever several times until backing paper exits labeler. If backing paper does not become taut and exit at rear, remove backing paper from slot and repeat steps 6 and 7.
3. Betjeningsvejledning
Once the labels are loaded, the Monarch 1131 pricing gun is ready for operation. Ensure the gun is properly set for the desired price or code before applying labels.
- Setting Characters: Refer to your Monarch 1131 pricing gun's manual for instructions on how to set the desired characters (e.g., price, date, code).
- Anvendelse af etiketter: Position the gun's applicator head firmly against the surface where the label is to be applied. Squeeze the operating lever fully to dispense and apply a single label.
- Checking Application: After applying, ensure the label is securely adhered and the print is clear and legible.
4. Vedligeholdelse og opbevaring
Proper maintenance and storage will extend the life of your labels and ensure consistent performance.
- Opbevaringsbetingelser: For optimal performance, labels should be stored and used at temperatures ranging from 60°F (15°C) to 80°F (27°C) and at a relative humidity of 50%-75%. Avoid extreme temperatures and humidity.
- Håndtering: Handle label rolls by the edges to prevent contamination or damage to the adhesive surface.
- Kompatibilitet: SENSO® labels may not be compatible with all surfaces or substrates. It is recommended to test labels under all usage conditions and environments before large-scale application.
5. Fejlfinding
If you encounter issues while using your Monarch 1131 White Labels, consider the following:
- Etiketter fremføres ikke:
- Ensure labels are loaded correctly according to the "Loading Labels" section.
- Check for any jams or obstructions in the label path of the pricing gun.
- Verify that the label roll is properly seated on the hubs.
- Dårlig vedhæftning:
- Ensure the application surface is clean, dry, and free of dust or grease.
- Check if the labels have been stored under recommended conditions. Extreme temperatures or humidity can affect adhesive performance.
- Problemer med udskriftskvalitet:
- This is typically related to the pricing gun's ink roller or print head. Refer to your pricing gun's manual for maintenance.
6. Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | Avery Dennison |
| Modelnummer | MO1131/WT |
| Varens vægt | 1.58 pund |
| Pakkedimensioner | 6.22 x 3.31 x 2.99 tommer |
| Farve | Hvid |
| Form | Rektangulær |
| Størrelse | 0.78 tommer x 0.44 tommer. |
| Fabrikant | Avery Dennison |
7. Garantioplysninger
Avery Dennison SENSO® labels are warranted to be free from defects in materials and workmanship and to operate satisfactorily with any correctly functioning Avery Dennison® or Monarch® machine for which the labels are designed. All claims under this warranty must be made within 90 days of shipment.
Vigtig bemærkning: Avery Dennison's liability arising from any connection with the products sold is limited to the purchase price of the product. This warranty does not cover compatibility issues with machines other than those specified or issues arising from improper storage or use.
8. Kundesupport
For further assistance or inquiries regarding your Genuine Monarch 1131 White Labels, please contact Avery Dennison customer support. Refer to the product packaging or the official Avery Dennison webwebsted for kontaktoplysninger.
