GE Lighting 93100348

GE Lighting LED+ Outdoor Security Flood Light Bulb

Model 93100348: Motion Sensor, Dusk-to-Dawn, Warm White

Indledning

This manual provides instructions for the installation, operation, and maintenance of your GE Lighting LED+ Outdoor Security Flood Light Bulb. This LED bulb features integrated motion sensing and dusk-to-dawn functionality, designed for outdoor security and convenience.

GE LED+ Outdoor Security Flood Light Bulb with features highlighted

Image: The GE LED+ Outdoor Security Flood Light Bulb, showcasing its design and key features like 'Linkable Motion System' and 'Dusk to Dawn' setting.

Opsætning og installation

  1. Sluk: Før installation skal du sørge for, at strømmen til lampen er slukket ved afbryderen for at forhindre elektrisk stød.
  2. Select Fixture: This bulb is designed for outdoor use in fixtures with an E26 medium base. Ensure the fixture is rated for the bulb's wattage (15W).
  3. Installer pære: Carefully screw the GE LED+ bulb into the E26 medium base socket until snug. Do not overtighten.
  4. Tænd: Restore power to the light fixture from the circuit breaker. The bulb will perform an initial self-test.
  5. Placering: For optimal motion detection, position the fixture so the bulb's sensor has a clear line of sight to the area you wish to monitor. Avoid obstructions.

Vigtig bemærkning: Denne pære er ikke compatible with dimmer switches. Using it with a dimmer switch may cause malfunction or damage.

Diagram showing dimensions of an E26 Medium Base bulb

Image: A diagram illustrating the dimensions of a standard E26 Medium Base, indicating it is the most common base size.

Betjeningsvejledning

The GE LED+ Outdoor Security Flood Light Bulb operates automatically based on ambient light levels and motion detection.

  • Dusk-to-Dawn Function: The integrated sensor detects ambient light. When it gets dark, the bulb will automatically illuminate at 50% brightness. It will remain at this level until dawn, when it will turn off.
  • Bevægelsesdetektion: When motion is detected during the dusk-to-dawn operating period, the bulb will increase its illumination to 100% brightness for approximately 3 minutes. After 3 minutes of no further motion, it will return to 50% brightness.
  • Linkbart system: This bulb can be linked with up to 30 other compatible GE LED+ Linkable Motion bulbs or fixtures to create a synchronized security lighting system. When motion triggers one linked bulb, all linked bulbs will activate to 100% brightness for 3 minutes. Refer to the product packaging or GE Lighting website for specific linking instructions if not provided here.
Side-by-side comparison of a porch light before and after motion detection

Image: A visual representation of the bulb's motion detection feature, showing a porch dimly lit before motion and brightly illuminated after a person walks by.

Overhead view of a house and driveway illuminated by multiple linked security lights

Billede: En luftfoto view demonstrating the linkable motion system, where multiple bulbs illuminate a large outdoor area simultaneously upon detection of motion.

Opretholdelse

  • Rensning: Ensure power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Udskiftning af pære: The bulb has an estimated life of 15,000 hours. When the bulb reaches the end of its life, replace it with a new compatible GE LED+ Outdoor Security Flood Light Bulb.

Fejlfinding

ProblemMulig årsagLøsning
Bulb does not turn on at night.No power to fixture; ambient light too high; faulty bulb.Check circuit breaker. Ensure fixture is not obstructed by other light sources. Replace bulb if necessary.
Bulb stays at 100% brightness constantly.Constant motion detected; sensor obstructed; bulb in a fixture with a dimmer.Ensure no continuous motion in sensor's range. Clear any obstructions from the sensor. Do not use with dimmer switches.
Bulb does not dim to 50% at night.Constant motion detected; sensor obstructed.Verify no motion is continuously triggering the sensor. Ensure the sensor is clear of debris or obstructions.
Linked bulbs do not activate together.Bulbs out of range; linking not properly established.Ensure linked bulbs are within the specified communication range. Refer to linking instructions on product packaging or GE Lighting webwebsted.

Specifikationer

FeatureSpecifikation
Modelnummer93100348
LyskildetypeLED
Lysstyrke1200 lumen
Farvetemperatur3000K (varm hvid)
Wattage15 Watts (90-Watt Replacement)
Voltage120 volt
Pære baseE26 medium
DæmpbarIngen
Rated Life15,000 timer
Estimeret energiomkostning$1.81 om året
Indendørs/Udendørs brugUdendørs
Særlige funktionerDawn-To-Dusk, Motion Sensor, Linkable
Produktdimensioner6 cm L x 3.8 cm B x 3.8 cm H
MaterialePlast

Garanti og support

This product is covered by a manufacturer's warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official GE Lighting webwebsted.

For yderligere assistance, teknisk support eller til view additional products, please visit the GE Lighting Store on Amazon or the official GE Lighting webwebsted.

Relaterede dokumenter - 93100348

Preview GE Lighting LED+ Motion Bulb Hurtigstartguide
En hurtigstartguide til GE Lighting LED+ bevægelsespære, der beskriver installation og betjening af bevægelsesaktiveret belysning.
Preview GE LED+ BR30 RGB Speaker Bulb Quick Start Guide
This guide provides instructions for setting up and using the GE LED+ BR30 RGB Speaker Bulb, a smart lighting solution with integrated Bluetooth speaker functionality. Learn about pairing, controlling music, adjusting light colors and brightness, and creating stereo sound experiences.
Preview Brugervejledning til GE Connected BR30 Smart Bulb og FCC-overholdelse
Dette dokument indeholder brugeroplysninger, sikkerhedsforanstaltninger og FCC/IC-overensstemmelseserklæringer for GE Connected BR30 Smart Bulb (CLEDR309CD1). Lær om dens funktioner, installation og retningslinjer for interferens.
Preview GE LED+ Color Changing Bulb Quick Start Guide - Model 93128968
This Quick Start Guide provides essential information for GE LED+ Color Changing bulbs, including installation steps, remote control operation, and features. Covers model number 93128968.
Preview GE LED+ PAR38 RGB Højttalerpære Lynstartguide
Kom hurtigt i gang med GE LED+ PAR38 RGB-højttalerpæren. Denne guide dækker opsætning, Bluetooth-parring, fjernbetjeningsfunktioner og avancerede funktioner som stereolydkonfigurationer til dit smarte belysnings- og lydsystem.
Preview GE Sensor Batteriskinne med bevægelsessensor - Lynstartguide
Lynvejledning til GE Lighting Sensor Battery Bar, en bevægelsesaktiveret LED-lysarmatur. Lær, hvordan du installerer og betjener enheden.