Rega Fono Mini A2D Mk2 Phono Preamplivligere brugervejledning

1. Introduktion

The Rega Fono Mini A2D Mk2 is a high-quality phono preamplifier designet til amplify the signal from a Moving Magnet (MM) turntable cartridge to a level suitable for any line-level input on an audio amplifier. This device also features an integrated USB output with level control, allowing users to transfer their vinyl records to a computer for digital archiving or playback. Its compact design and user-friendly interface make it a valuable addition to any hi-fi setup.

Figure 1: Rega Fono Mini A2D Mk2 phono preamplifier. This image shows the compact black unit from a slightly elevated front perspective, highlighting its sleek design.

2. Sikkerhedsoplysninger

• Strømforsyning: Only use the power adapter supplied with the unit. Ensure the power adapter is compatible with your local mains voltage. Note: Some units may be supplied with a UK-standard plug. An appropriate adapter may be required for use in other regions.
• Placering: Place the unit on a stable, level surface away from direct sunlight, heat sources, and moisture. Ensure adequate ventilation.
• Forbindelser: Always ensure all audio components are switched off before making or breaking connections.
• Rensning: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.

3. Pakkens indhold

Kontroller venligst, at din pakke indeholder følgende varer:

• Rega Fono Mini A2D Mk2 Phono Preamplivligere
• Strømadapter
• USB kabel

4. Produktfunktioner

• Phono preamplifier for Moving Magnet (MM) cartridges.
• Redesigned casing to match current Rega product aesthetics.
• USB output with level control for transferring vinyl audio to your computer.
• Allows editing and storage of vinyl records using audio editing software (not included).
• Based on the phono amplivligere stage of the Rega Brio amplifier and Rega Fono MM.

Figure 2: Front panel of the Rega Fono Mini A2D Mk2. This image clearly displays the 'Level' knob and the 'USB Output' port on the front of the unit.

5. Opsætning

5.1. Connecting to a Turntable

1. Ensure your turntable is equipped with a Moving Magnet (MM) cartridge.
2. Connect the RCA output cables from your turntable to the 'Input' RCA jacks on the rear of the Fono Mini A2D Mk2. Ensure left (white) and right (red) channels are correctly matched.
3. Connect the ground wire from your turntable to the ground terminal on the Fono Mini A2D Mk2 (if your turntable has one).

5.2. Forbindelse til en Amplivligere

1. Connect RCA cables from the 'Output' RCA jacks on the rear of the Fono Mini A2D Mk2 to a line-level input on your amplifier (e.g., 'Aux', 'CD', 'Tuner'). Do ikke connect to your amplifier's 'Phono' input, as this would result in over-amplifikation.

5.3. Connecting to a Computer (for USB recording)

1. Connect the supplied USB cable from the 'USB Output' port on the front of the Fono Mini A2D Mk2 to an available USB port on your computer.
2. Your computer should automatically detect the Fono Mini A2D Mk2 as a USB audio device.

5.4. Strømtilslutning

1. Tilslut den medfølgende strømadapter til 'Power' input on the rear of the Fono Mini A2D Mk2.
2. Plug the power adapter into a suitable mains outlet. The power indicator LED on the rear will illuminate.

Figure 3: Rear panel connections of the Rega Fono Mini A2D Mk2. This image shows the RCA 'Input' and 'Output' jacks, the 'Power' input, and the ground terminal.

6. Betjening

6.1. Grundlæggende afspilning

1. Ensure all connections are made as described in Section 5.
2. Select the appropriate line-level input on your amplifier to which the Fono Mini A2D Mk2 is connected.
3. Start playing a record on your turntable.
4. Juster lydstyrken på din amplifier to your desired listening level. The Fono Mini A2D Mk2 does not have a volume control for analog output.

6.2. USB-optagelse

1. With the Fono Mini A2D Mk2 connected to your computer via USB, open your preferred audio recording software (e.g., Audacity, GarageBand).
2. In your software's audio settings, select the Fono Mini A2D Mk2 as the input recording device.
3. Start playing a record on your turntable.
4. Juster 'Level' knob on the front of the Fono Mini A2D Mk2. Monitor the input level in your recording software to ensure it is not clipping (distorting) but is sufficiently strong. Aim for peaks around -6dB to -3dB.
5. Begin recording in your software.
6. After recording, you can use your software to edit, normalize, and save your digital audio files.

7. Vedligeholdelse

• Rensning: Keep the unit clean by wiping it with a soft, dry, lint-free cloth. Avoid abrasive cleaners or solvents.
• Opbevaring: Hvis enheden skal opbevares i længere tid, skal den afbrydes fra strømforsyningen og opbevares et køligt og tørt sted.
• Ventilation: Ensure the unit has adequate airflow around it to prevent overheating. Do not block ventilation openings.

8. Fejlfinding

• Ingen lyd:
  • Check all RCA connections between the turntable, Fono Mini A2D Mk2, and amplivligere.
  • Ensure the Fono Mini A2D Mk2 is powered on (power LED illuminated).
  • Bekræft, at det korrekte input er valgt på din amplivligere.
  • Confirm your turntable is playing and its cartridge is functioning.
• Forvrænget lyd:
  • Ensure your turntable has a Moving Magnet (MM) cartridge. This unit is not designed for Moving Coil (MC) cartridges.
  • Check that the Fono Mini A2D Mk2 is connected to a line-level input on your amplifier, not a 'Phono' input.
  • For USB recording, adjust the 'Level' knob to prevent clipping in your recording software.
• Summende/Summende støj:
  • Ensure the turntable's ground wire is securely connected to the Fono Mini A2D Mk2's ground terminal.
  • Check for any loose connections or interference from other electronic devices.
• Problemer med USB-optagelse:
  • Verify the USB cable is securely connected to both the Fono Mini A2D Mk2 and your computer.
  • Ensure the Fono Mini A2D Mk2 is selected as the input device in your computer's sound settings and your recording software.
  • Restart your computer and the Fono Mini A2D Mk2.
• Incorrect Power Adapter Plug:
  • If the supplied power adapter has a plug incompatible with your region (e.g., UK plug in EU), you will need to obtain a suitable travel adapter or a compatible power supply from a reputable vendor.

9. Specifikationer

10. Garantioplysninger

The Rega Fono Mini A2D Mk2 comes with a 2 års producentgaranti. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

11. Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Rega dealer or the Rega customer support directly. Contact information can typically be found on the official Rega webhjemmeside eller gennem din forhandler.