LTO-Tracker 2 Thermal Viewer Instruktionsmanual

1. Produktet er slutview

The Leupold LTO-Tracker 2 is a compact and lightweight thermal viewer designed to enhance your outdoor experience, whether for hunting, tracking, or general observation. It allows you to detect heat signatures from game, blood trails, and other objects, both day and night. Its robust design and advanced features make it a reliable companion in various conditions.

A key feature is the new Beacon-tilstand, which recalibrates the screen to improve daytime use, making it easier to identify objects with similar heat signatures to their backgrounds. Built with a durable aluminum housing and a Gorilla Glass display, the LTO-Tracker 2 is designed for rugged field use.

Figure 1: The Leupold LTO-Tracker 2 Thermal Viewer, a compact and durable device for detecting heat signatures.

2. Nøglefunktioner

• Modelnummer: 177187
• Holdbarhed: 100% waterproof, fog proof, and shockproof construction.
• Registreringsområde: Up to 600-yard detection range.
• Vise: 240 x 204 resolution display with Gorilla Glass for enhanced durability.
• Konstruktion: Lightweight and rugged aluminum housing.
• Zoom: 7x digital zoom for improved identification at longer distances.
• Farvepaletter: Six different thermal color palette options.
• Oprindelse: Designed, machined, and assembled in the USA.
• Specialtilstand: Beacon mode for improved daytime visibility.

3. Opsætning

The LTO-Tracker 2 is designed for quick and easy setup, allowing you to get it ready for use in minimal time.

3.1. Batteriinstallation

The LTO-Tracker 2 operates on a single CR123 battery. To install the battery:

1. Locate the battery cap, typically at the rear or side of the device.
2. Unscrew the battery cap counter-clockwise.
3. Insert a fresh CR123 battery with the positive (+) end facing inward, as indicated by the diagram near the battery compartment.
4. Screw the battery cap back on clockwise until it is finger-tight to ensure a waterproof seal.

3.2. Første opstart

After battery installation, press and hold the power button (refer to the device's physical buttons for exact location) for approximately 2-3 seconds until the display illuminates. The device will perform a brief startup sequence, typically taking about 5 seconds, before displaying the thermal image.

Figure 2: The LTO-Tracker 2 in use, demonstrating its compact size and clear thermal display.

4. Betjeningsvejledning

The LTO-Tracker 2 features intuitive controls for easy operation in the field.

4.1. Tænd/sluk

• For at tænde: Tryk på tænd/sluk-knappen, og hold den nede, indtil skærmen aktiveres.
• For at slukke: Tryk på tænd/sluk-knappen, og hold den nede, indtil skærmen slukker.

4.2. Valg af tilstand

The LTO-Tracker 2 typically has buttons for navigating menus and selecting modes. Consult the physical buttons on your device for specific functions (e.g., a central button for menu, and directional buttons for navigation).

4.3. Digital zoom

The device features a 7x digital zoom. Use the designated zoom buttons (often marked with '+' and '-') to magnify or reduce the thermal image. Note that digital zoom may reduce image clarity at higher magnifications.

4.4. Beacon Mode

Activate Beacon mode to recalibrate the screen, which helps improve visibility and object identification during daylight hours, especially when heat signatures are subtle or blend with the background.

4.5. Farvepaletter

The LTO-Tracker 2 offers six distinct color palettes to optimize viewing for different environments and preferences. Cycle through these palettes using the dedicated palette selection button to find the best contrast for your situation.

Figure 3: The six selectable color palettes available on the LTO-Tracker 2, including Hi-Black, Hi-White, Hi/Lo Green, Black, White, and Green.

5. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your LTO-Tracker 2.

5.1. Rensning

• Linser: Use a soft, lint-free cloth specifically designed for optics. Gently wipe away dust and debris. For stubborn smudges, use a small amount of lens cleaning solution applied to the cloth, not directly to the lens.
• Legeme: Tør enhedens kabinet af med en ren, tør kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.

5.2. Opbevaring

• Store the LTO-Tracker 2 in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for extended periods, remove the battery to prevent leakage and potential damage to the device.

5.3. Batteripleje

• Always use high-quality CR123 batteries.
• Replace batteries when the low battery indicator appears to ensure consistent performance.
• Bortskaf brugte batterier ansvarligt i henhold til lokale regler.

6. Fejlfinding

If you encounter issues with your LTO-Tracker 2, refer to the following common troubleshooting steps:

• Enheden tænder ikke:
  • Sørg for, at batteriet er korrekt installeret med den korrekte polaritet.
  • Udskift batteriet med et nyt.
  • Check that the battery cap is securely tightened.
• Sløret eller forvrænget billede:
  • Clean the objective lens and eyepiece with a suitable lens cloth.
  • Power the device off and then on again to reset the display.
  • Ensure the device is operating within its specified temperature range (-40°F to 572°F).
• Poor Thermal Detection:
  • Adjust the color palette to one that provides better contrast for your environment.
  • Sørg for, at der ikke er nogen forhindringer foran linsen.
  • Consider the distance to the target; detection range is up to 600 yards, but identification clarity decreases with distance.
• Knapper reagerer ikke:
  • Tænd og tænd for enheden.
  • Sørg for, at der ikke sidder snavs fast omkring knapperne.

If problems persist after attempting these steps, please contact Leupold customer support for further assistance.

7. Tekniske specifikationer

Figure 4: Detailed technical specifications for the LTO-Tracker 2.

Figure 5: Comparison of LTO-Tracker series handheld thermal devices, highlighting differences in resolution, detection distance, and features.

8. Garanti og support

8.1. Garantioplysninger

Leupold LTO-Tracker 2 Thermal Viewer is covered by Leupold's Gold Ring 2-Year Electronics Warranty. This warranty covers defects in materials and workmanship for a period of two years from the date of purchase. Please retain your proof of purchase for warranty claims.

8.2. Kundesupport

For technical assistance, service, or warranty claims, please contact Leupold customer support. You can find contact information and additional resources on the official Leupold webwebsted:

Visit the Official Leupold Store on Amazon

Hav venligst dit produktmodelnummer (177187) og købsoplysninger klar, når du kontakter support.