1. Introduktion
The HID Global RP10-H (Model: 900PHRNEK00466) is a versatile multi-technology access control reader designed for secure identification. This reader supports various credential technologies including PIVCLS, SE E, and operates with HF (High Frequency) standards, SIO, SEOS, and FIPS compliance. It is engineered for robust performance in access control systems, providing reliable authentication for authorized personnel. This manual provides essential information for the proper installation, operation, and maintenance of your RP10-H reader.
Billedbeskrivelse: The image above displays the HID Global logo, which features the word "HID" in bold white capital letters against a solid blue rectangular background with rounded corners. A small registered trademark symbol (®) is visible in the upper right corner of the blue rectangle.
2. Opsætning og installation
Proper installation is crucial for the optimal performance of the RP10-H reader. It is recommended that installation be performed by qualified personnel.
2.1. Pakkens indhold
- HID Global RP10-H Reader (Model: 900PHRNEK00466)
- Monteringsudstyr (skruer, ankre)
- Installationsvejledning (dette dokument)
2.2. Monteringsvejledning
- Choose a suitable mounting location, ensuring it is flat and free from obstructions.
- Brug den medfølgende monteringsskabelon (hvis relevant) til at markere borepunkter.
- Bor pilothuller til monteringsskruerne.
- Secure the reader to the mounting surface using the provided hardware. Ensure the reader is firmly attached.
2.3. Lednings- og strømtilslutning
The RP10-H reader requires a stable power supply and proper connection to the access control panel. Refer to the wiring diagram provided with your specific access control system for detailed connections.
- Connect the reader's power input to a regulated DC power supply (typically 5-16 VDC).
- Connect the data lines (e.g., Wiegand, OSDP) to the corresponding inputs on your access control panel.
- Sørg for, at alle forbindelser er sikre og isolerede for at forhindre kortslutninger.
- Verify proper grounding to prevent electrical interference.
3. Betjening af læseren
Once installed and powered, the RP10-H reader is ready for operation.
3.1. Credential Presentation
To gain access, present your compatible access credential (e.g., PIV, SEOS card, mobile credential) within close proximity to the reader's face. The optimal reading distance may vary depending on the credential type and environmental factors.
3.2. LED and Audible Indicators
The RP10-H reader provides visual and audible feedback to indicate its status and the outcome of a credential presentation.
| Indikator | Beskrivelse |
|---|---|
| Grøn LED | Indicates successful credential read and access granted. |
| Rød LED | Indicates credential read error or access denied. |
| Amber/Yellow LED | Indicates reader busy or awaiting input. |
| Enkelt bip | Successful credential read. |
| Multiple Beeps | Error during credential read or access denied. |
4. Vedligeholdelse
The HID Global RP10-H reader is designed for minimal maintenance.
- Rensning: Tør læserens overflade af med jævne mellemrum med en blød klud.amp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Firmwareopdateringer: Firmware updates may be available from HID Global to enhance performance or add new features. Consult your system administrator or HID Global support for information on applying updates.
- Inspektion: Regularly inspect the reader and its wiring for any signs of damage or wear.
5. Fejlfinding
If you encounter issues with your RP10-H reader, refer to the following common troubleshooting steps.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Reader is unresponsive (no LEDs, no sound). | Ingen strøm eller forkert ledningsføring. |
|
| Credential not reading or access denied (Red LED/multiple beeps). |
|
|
| Intermittent reading. |
|
|
For issues not resolved by these steps, please contact HID Global technical support or your system integrator.
6. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 900PHRNEK00466 |
| Mærke | HID Global |
| Understøttede teknologier | PIVCLS, SE E, HF STD/SIO/SEOS/FIPS |
| Farve | Sort (BLK) |
| Interface | Wiegand (WG) |
| Pakkedimensioner | 8 x 8 x 8 tommer |
| Varens vægt | 1 pund |
| ASIN | B07N5872JC |
| Dato først tilgængelig | 4. september 2019 |
7. Garanti og support
For information regarding the product warranty, please refer to the warranty documentation provided with your purchase or visit the official HID Global webwebsted.
For technical support, product inquiries, or further assistance, please contact HID Global customer service or your authorized distributor.
- HID Global Official Webwebsted: www.hidglobal.com
- Teknisk support: Refer to the support section on the HID Global webwebsted for kontaktoplysninger, der er specifikke for din region.
