CTEK 56-108

CTEK XS 7000

Brugermanual

Indledning

The CTEK XS 7000 is an advanced, fully automatic 7-step battery charger designed for optimal charging and maintenance of 12V lead-acid batteries. This charger is suitable for a wide range of battery sizes, from 14Ah up to 150Ah for charging, and up to 225Ah for maintenance charging. Its user-friendly design allows for a simple plug-and-forget operation, ensuring your battery is always in peak condition.

Nøglefunktioner

  • Fully Automatic 7-Step Charging: Ensures optimal battery performance and longevity.
  • Patented Desulphation Function: Helps to restore sulphated batteries.
  • Automatic Battery Diagnosis: Determines if the battery can receive and hold a charge.
  • Letlæselig LED-skærm: Provides clear indication of the charging process.
  • Sikker betjening: Spark-free, reverse polarity protected, and short-circuit proof.
  • Holdbart design: Splash and dustproof (IP65 rated) for various environments.
  • Patented Maintenance Charge: Extends battery life for long-term storage.

Pakkens indhold

Upon unboxing your CTEK XS 7000, please ensure all the following components are present:

  • CTEK XS 7000 Battery Charger Unit
  • Connection Cables with Eyelet Connectors
  • Connection Cables with Clamp Connectors (High Quality Clips)
CTEK XS 7000 charger accessories including eyelet and clamp stik

Image: Included accessories for the CTEK XS 7000, showing both the eyelet and clamp stikkabler.

Opsætning og tilslutning

Follow these steps to safely set up and connect your CTEK XS 7000 battery charger:

  1. Klargør batteriet: Sørg for, at batteripolerne er rene og fri for korrosion.
  2. Tilslut til batteri: Choose the appropriate connection cables (eyelet or clamp). Connect the red (+) cable to the positive battery terminal and the black (-) cable to the negative battery terminal. Ensure a secure connection.
  3. Tilslutning til elnettet: Sæt opladerens netledning i en passende stikkontakt.
  4. Start opladning: The charger will automatically begin its diagnostic and charging process. There is no need to press a mode button.
CTEK XS 7000 charger connected to a battery with clamp stik

Image: The CTEK XS 7000 charger connected to a battery using the provided clamp stik.

Betjeningsvejledning

The CTEK XS 7000 operates as a fully automatic 7-step charger. Once connected, it will proceed through the following stages:

  • Step 1: Desulphation: Detects sulphated batteries and applies a pulsed voltage to remove sulphate from the lead plates, restoring battery capacity.
  • Step 2: Soft Start: Tests if the battery can accept charge. This step prevents charging a defective battery.
  • Step 3: Bulk: Hovedopladning stage where 80% of the charge is delivered. The charger delivers maximum current until the battery voltage reaches a set level.
  • Step 4: Absorption: Completes the charge up to 100%. The current decreases as the battery voltage reaches its maximum.
  • Step 5: Analyze: Tests if the battery can hold charge. If the battery voltage drops, the charger will restart the charging cycle.
  • Step 6: Recond (Recondition): This step is for deeply discharged batteries. It mixes the battery acid and restores the battery capacity. (Note: The XS 7000 does not have a manual Recond mode, it's part of the automatic process if needed).
  • Step 7: Float: Maintains the battery at maximum charge by providing a constant voltage opladning.
  • Step 8: Pulse (Maintenance Charging): Maintains the battery at 95–100% capacity. The charger monitors the battery voltage and gives a pulse when needed.

The clear LED display on the charger indicates the current charging stage and battery status. If the charger detects an issue, such as reverse polarity, an error indicator will light up.

Top-down view of the CTEK XS 7000 battery charger with LED indicators and reset button

Billede: Top view of the CTEK XS 7000, showing the LED indicators for charging stages and the 'RESET' button.

Genstarts knap: If an error occurs or you wish to restart the charging process, press the 'RESET' button on the charger.

Opretholdelse

The CTEK XS 7000 is designed for durability and minimal maintenance. Its IP65 rating means it is splash and dustproof. To ensure optimal performance and longevity:

  • Keep the charger clean and free from excessive dust or debris.
  • Store the charger in a dry, well-ventilated area when not in use.
  • Inspect cables and connectors periodically for any signs of damage or wear. Replace if necessary.
  • Nedsænk ikke opladeren i vand.

Fejlfinding

If you encounter issues with your CTEK XS 7000, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Charger does not start / No LEDs light upNo mains power; Poor battery connection; Battery voltage for lavt.Check wall outlet and power cord. Ensure secure connection to battery terminals. The charger requires a minimum battery voltage (typically 2V) to start.
Fejl-LED lyserOmvendt polaritetstilslutning; Kortslutning; Batterifejl.Disconnect from mains and battery. Reconnect ensuring correct polarity (+ to +, - to -). Check for any short circuits in the cables. If the error persists, the battery may be faulty.
Opladning tager for lang tidBattery is very large or deeply discharged; Battery is old/damaged.This is normal for large or deeply discharged batteries. If excessively long, the battery may be nearing end-of-life.
Opladeren bliver varmNormal drift.It is normal for the charger to get warm during the bulk charging phase. Ensure adequate ventilation around the unit.

If the problem persists after trying these solutions, please contact CTEK customer support.

Specifikationer

FeatureSpecifikation
MærkeCTEK
ModelnavnCTEK XS 7000
Modelnummer56-108
Udgang Voltage12 volt
Nuværende vurdering7 Amps
Batterikapacitet (opladning)14-150 Ah
Batterikapacitet (vedligeholdelse)Op til 225 Ah
BeskyttelsesklasseIP65 (stænk- og støvtæt)
Dimensioner (pakke)25.9 x 18.6 x 5.7 cm
Vægt960 g
SikkerhedsfunktionerSpark-free, Reverse Polarity Protected, Short Circuit Proof
Specifikation MetEnergy Star

Garanti og support

For warranty information and technical support, please refer to the official CTEK webwebstedet eller kontakt din forhandler. Gem din købsbevis i tilfælde af garantikrav.

CTEK Official Webwebsted: www.ctek.com

Relaterede dokumenter - 56-108

Preview CTEK MXS 5.0 Batterioplader Brugermanual
Omfattende brugermanual til CTEK MXS 5.0 (1090) 12V batterioplader, der dækker sikkerhedsinstruktioner, betjeningsprocedurer, opladningsprogrammer, tekniske specifikationer og garantioplysninger.
Preview CTEK Comfort Connect batterioplader brugermanual
Omfattende brugermanual til CTEK Comfort Connect batteriopladeren, med detaljerede oplysninger om opladningstilstande, tilslutningsinstruktioner, sikkerhedsforanstaltninger og tekniske specifikationer.
Preview CTEK D250SE & SMARTPASS 120S Dual Battery System User Manual
Comprehensive user manual for CTEK D250SE and SMARTPASS 120S dual battery chargers, covering installation, functions, safety, troubleshooting, and technical specifications for optimal battery management in vehicles and boats.
Preview CTEK PRO25S Acculader Brugervejledning
Detaljeret brugervejledning til CTEK PRO25S batterilader. Leer hoe du loodzuur- en lithiumaccus er sikker og effektiv oplaadt med den forbedrede teknologi fra CTEK SWEDEN AB.
Preview CTEK MULTI US 7002 Fejlfindingsvejledning | Problemer med batterioplader
Omfattende fejlfindingsvejledning til CTEK MULTI US 7002-batteriopladeren, der beskriver almindelige LED-indikatorproblemer, forklaringer og anbefalede tests til at løse problemer.
Preview Instrukcja Obsługi CTEK XS 0.8: Ładowarka Akumulatorów
Szczegółowa instrukcja obsługi og specyfikacja techniczna ładowarki akumulatorów CTEK XS 0.8. Zawiera informacje o programie ładowania, podłączaniu, bezpieczeństwie og pomocy technicznej.