1. Introduktion
This manual provides comprehensive instructions for the installation, setup, and operation of your LoraTap WiFi Smart Curtain Switch. This device allows for convenient control of motorized curtains, blinds, and projection screens via touch, mobile application, and voice commands through compatible smart home systems.
Læs venligst denne manual grundigt inden installation og brug for at sikre korrekt funktion og sikkerhed.
2. Produktfunktioner
- Timing funktion: Schedule automatic opening and closing of curtains via the mobile application.
- App kontrol: Remote control from anywhere using the "Smart Life" application (2.4 GHz Wi-Fi required).
- Stemmestyring: Kompatibel med Amazon Alexa og Google Home for håndfri betjening.
- Safe Touch Panel: 4mm tempered glass panel for safe operation, even with wet hands.
- Bred kompatibilitet: Works with most smart curtains, blinds, and projection screens that use a 4-wire motor.
Billede: Overview of control methods including remote, timer, touch, and voice control.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x LoraTap WiFi Curtain Switch
- 1 x Brugervejledning (dette dokument)
4. Specifikationer
| Input bindtage | 100-250V 50/60Hz |
| Ledningsføring | Live wire and Neutral wire required |
| Belastningskapacitet | ≤600W |
| Glasplade | 4 mm hærdet glas |
| Wi-Fi-standard | 2.4 GHz 802.11 b/g/n (5GHz Wi-Fi not supported) |
| Standby strømforbrug | ≤0.5W |
| Arbejdstemperatur | -30°C til 70°C (-22°F til 158°F) |
| Dimensioner | 72 x 120 x 39mm (approximately 2.83 x 4.72 x 1.54 inches) |
| Materiale | Acrylonitril Butadien Styren (ABS) |
| Nuværende vurdering | 6 Amps |
| Operation Voltage | 250 volt |
Image: Physical dimensions of the switch and demonstration of its waterproof tempered glass panel.
5. Sikkerhedsoplysninger
- Elektrisk fare: Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Sluk: Always turn off power at the circuit breaker before installing, removing, or servicing the switch.
- Ledningsføring: This switch requires both a live wire and a neutral wire for operation. Ensure your electrical box has both.
- Motorkompatibilitet: This switch is designed for 4-wire motorized curtains/blinds/shutters (Brown-Open, Blue-Common, Black-Close, Yellow&Green-Ground). It is not compatible with 2-wire motors.
- Kun indendørs brug: Do not install this device in outdoor environments or areas exposed to direct water.
6. Installation
- Sluk for strømmen: Find afbryderen, der styrer strømmen til kontaktplaceringen, og sluk den. Kontroller, at strømmen er slukket, ved hjælp af en lydstyrkemåler.tage tester.
- Fjern den gamle switch: Carefully remove your existing curtain switch from the wall box.
- Identificér ledninger: Identify the Live (L), Neutral (N), Open (L1), Close (L2), and Ground wires. This switch requires a neutral wire.
- Tilslut ledninger: Connect the wires to the LoraTap WiFi Curtain Switch according to the wiring diagram below. Ensure all connections are secure.
- Monter afbryder: Gently push the switch into the wall box and secure it with screws. Attach the glass panel.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.
7. Ledningsdiagram
The LoraTap WiFi Curtain Switch requires a 4-wire motor connection. Refer to the diagram below for correct wiring:
- Indgang L: Live Wire (from mains power)
- Indgang N: Neutral Wire (from mains power)
- Udgang N: Neutral Wire (to motor)
- Udgang L1: Open Wire (to motor, typically Brown)
- Udgang L2: Close Wire (to motor, typically Black)
- Jord: Ground Wire (to motor, typically Yellow & Green)
Image: Detailed wiring diagram showing connections for Input L, Input N, Output N, Output L1, Output L2, and Ground. Also illustrates variable use cases for curtains, blinds, and projector screens.
Vigtig: Ensure your motor has 4 wires (Open, Common, Close, Ground). The common wire from the motor connects to Output N on the switch.
8. App Setup (Smart Life App)
- Download app: Download appen "Smart Life" fra App Store (iOS) eller Google Play Store (Android).
- Registrer/Log ind: Åbn appen, og opret en ny konto, eller log ind med en eksisterende.
- Wi-Fi-krav: Sørg for, at din mobilenhed er forbundet til en Wi-Fi-netværk på 2.4 GHz. This switch does not support 5 GHz Wi-Fi. If you have a dual-band router, you may need to separate the 2.4 GHz and 5 GHz bands in your router settings.
- Tilføj enhed: I Smart Life-appen skal du trykke på "+"-ikonet i øverste højre hjørne for at tilføje en enhed.
- Vælg enhedstype: Choose "Curtain Switch" or "Wall Switch (Wi-Fi)" from the list of device types.
- Parringstilstand: Følg instruktionerne i appen for at sætte kontakten i parringstilstand. Dette indebærer normalt at trykke på og holde en knap på kontakten nede, indtil en indikatorlampe blinker hurtigt.
- Forbinde: Enter your 2.4 GHz Wi-Fi network password in the app and proceed with the connection.
- Omdøb enhed: Once connected, you can rename the switch for easier identification (e.g., "Living Room Curtains").
Image: The LoraTap Smart Curtain Switch shown alongside a smartphone running the Smart Life application, demonstrating app control.
9. Integration af stemmestyring
The LoraTap WiFi Smart Curtain Switch can be integrated with Amazon Alexa and Google Home for voice control.
9.1. Amazon Alexa-integration
- Åbn Amazon Alexa-appen.
- Go to "Skills & Games".
- Søg efter "Smart Life" and enable the skill.
- Link your Smart Life account with your Alexa account.
- Discover devices. Alexa will find your LoraTap Curtain Switch.
- You can now use voice commands like: "Alexa, open [Curtain Name]", "Alexa, close [Curtain Name]".
9.2. Google Home Integration
- Åbn Google Home-appen.
- Tap "+" then "Set up device" > "Works with Google".
- Søg efter "Smart Life" and link your Smart Life account.
- Assign your LoraTap Curtain Switch to a room.
- You can now use voice commands like: "Hey Google, open [Curtain Name]", "Hey Google, close [Curtain Name]".
Image: Illustration of automatic curtain scheduling and voice control integration with Amazon Alexa.
10. Betjening
10.1. Betjening med berøringsskærm
- Pil op: Tryk for at åbne gardinerne.
- Square (Pause): Touch to pause the curtains at their current position.
- Pil ned: Tryk for at trække gardinerne for.
10.2. Appkontrol
- Open the "Smart Life" app.
- Select your LoraTap Curtain Switch.
- Use the virtual buttons to open, close, or pause your curtains.
- Set schedules or timers for automated operation.
Image: Demonstrates that multiple users can control one switch, and one command can control a group of switches.
11. Vedligeholdelse
- Rensning: Tør glaspanelet af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Firmwareopdateringer: Tjek regelmæssigt Smart Life-appen for tilgængelige firmwareopdateringer for at sikre optimal ydeevne og sikkerhed.
- Undgå vand: While the panel is tempered glass, avoid excessive water exposure to the internal components.
12. Fejlfinding
- Kontakten reagerer ikke:
- Kontroller om afbryderen er slået til.
- Kontroller, at ledningsforbindelserne er sikre og korrekte.
- Ensure the motor is a 4-wire type and functioning correctly.
- Kan ikke oprette forbindelse til Wi-Fi:
- Confirm your router is broadcasting a 2.4 GHz Wi-Fi network.
- Ensure your phone is connected to the 2.4 GHz network during setup.
- Kontroller Wi-Fi-signalstyrken på switchens placering.
- Genstart din router, og prøv at parre igen.
- Ensure the switch is in pairing mode (indicator light flashing rapidly).
- Stemmestyring virker ikke:
- Verify the Smart Life skill/service is enabled and linked in your Alexa/Google Home app.
- Ensure the device name in Smart Life matches the name you are using for voice commands.
- Prøv at genopdage enheder i din Alexa/Google Home-app.
- Curtains Move in Wrong Direction:
- In the Smart Life app, check if there's an option to reverse motor direction.
- Alternatively, swap the L1 (Open) and L2 (Close) wires at the switch (after turning off power).
13. Garanti og support
LoraTap products are designed for reliability and performance. For warranty information, technical support, or assistance with your LoraTap WiFi Smart Curtain Switch, please refer to the contact information provided with your purchase or visit the official LoraTap webwebsted.
Gem venligst dit købsbevis for garantikrav.
