1. Produktet er slutview
The Paulmann 92924 LED Recessed Wall Spot is designed for discreet wall installation, providing decorative lighting effects and enhancing safety in areas such as hallways or staircases. This round fixture integrates a 1.7-watt LED, emitting a warm white light at 2700 Kelvin, similar to traditional incandescent bulbs. Its compact design and energy-efficient LED technology make it suitable for various indoor applications.
Image 1.1: The Paulmann 92924 LED Recessed Wall Spot, a round white fixture with an oval light opening.
2. Sikkerhedsinstruktioner
- Elektrisk sikkerhed: Installation must be performed by a qualified electrician or a person with appropriate electrical knowledge to prevent electric shock or fire hazards. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
- Tiltænkt brug: This product is designed for indoor use only. Do not install in wet or damp steder.
- Installationshøjde: The maximum recommended installation height for this wall spot is 50 centimeters from the floor to ensure optimal lighting effect and safety.
- Integreret LED: The LED light source is permanently integrated into the fixture and cannot be replaced by the user. Do not attempt to open or modify the LED module.
- Rensning: Brug en blød, tør klud til rengøring. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 1x Paulmann 92924 LED Recessed Wall Spot (with integrated LED bulb)
- Mounting instructions (this document)
4. Opsætning og installation
Follow these steps for proper installation of your Paulmann 92924 LED Recessed Wall Spot. Ensure power is disconnected before proceeding.
- Forbered installationsstedet: Choose a suitable wall location, ensuring it is within the recommended maximum height of 50 cm from the floor. A standard round electrical box (not included) is typically required for recessed installation.
- Ledningsforbindelse: Carefully connect the electrical wires from your mains supply to the terminals on the back of the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Refer to Image 4.1 for a visual guide to the wiring box and fixture.
Billede 4.1: En eksample of a green electrical wiring box with connected wires next to the Paulmann 92924 fixture, showing its rear connection points.
- Sikre armaturet: Once wired, carefully insert the fixture into the prepared electrical box in the wall. Ensure it sits flush and is securely fastened. Refer to Image 4.2 for a visual guide.
Image 4.2: Hands guiding the Paulmann 92924 fixture into a green electrical box recessed in a white wall, showing the connection process.
- Fastgør frontdækslet: Place the decorative front cover onto the main fixture body, ensuring it clicks into place or is securely attached as per the design. Refer to Image 4.3 for a visual guide.
Image 4.3: Hands carefully positioning the white round front cover onto the Paulmann 92924 recessed fixture, completing the installation.
- Gendan strøm: Når installationen er færdig, og alle komponenter er sikkert på plads, skal strømmen genoprettes ved hovedafbryderen.
Image 4.4: Multiple Paulmann 92924 recessed wall spots illuminating a hallway, demonstrating the installed appearance and light distribution.
5. Betjeningsvejledning
The Paulmann 92924 LED Recessed Wall Spot operates via your standard wall switch connected to the electrical circuit. There are no additional controls on the fixture itself.
- Tænd/sluk: Brug vægkontakten til at tænde eller slukke lysarmaturet.
6. Vedligeholdelse
The Paulmann 92924 LED Recessed Wall Spot requires minimal maintenance.
- Rensning: To clean the fixture, ensure power is off. Use a soft, dry, lint-free cloth to gently wipe the surface. Avoid using liquid cleaners, sprays, or abrasive materials, as these can damage the finish or electrical components.
- LED levetid: The integrated LED has an average lifespan of 30,000 hours. No bulb replacement is necessary or possible.
7. Fejlfinding
If you encounter issues with your Paulmann 92924 LED Recessed Wall Spot, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning. | Check the wall switch and circuit breaker. Ensure power is restored to the circuit. |
| Lyset flimrer eller er svagt. | Løs ledningsforbindelse. | WARNING: Disconnect power before checking connections. Verify that all electrical connections are secure. If unsure, consult a qualified electrician. |
| Armaturet er varmt at røre ved. | Normal operation (LEDs generate some heat). | A slight warmth is normal. If it is excessively hot or emits a burning smell, immediately disconnect power and contact Paulmann support. |
If the problem persists after attempting these solutions, please contact Paulmann customer support.
8. Specifikationer
| Mærke | Paulman |
| Modelnummer | 92924 |
| Produktmål (L x B x H) | 7.8 x 7.8 x 3.5 cm |
| Vægt | 91 gram |
| Materiale | Plast |
| Farve | Hvid |
| Stil | Traditionel |
| Form | Rund |
| Antal pærer | 1 (integreret LED) |
| Voltage | 230 volt |
| Specifikke anvendelser | Wall (Indoor) |
| Særlige funktioner | Lavt energiforbrug |
| Installationstype | Forsænket |
| Pære type | LED |
| Lysstrøm | 107 lm |
| Wattage | 1.1 watt (LED) |
| Glødelignende ækvivalent | 12 watt |
| Farvetemperatur | 2700 Kelvin (varm hvid) |
| Gennemsnitlig levetid | 30,000 timer |
| IP-vurdering | IP20 |
9. Garanti og support
For warranty information or technical support regarding your Paulmann 92924 LED Recessed Wall Spot, please refer to the official Paulmann website or contact their customer service department directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's webwebsted.
Paulmann is a brand committed to quality lighting solutions. For further assistance, please have your model number (92924) and purchase details ready when contacting support.
