1. Introduktion
Tak for købetasing the American DJ HYDRO BEAM X1. This professional IP65-rated moving head beam fixture is designed for outdoor use, featuring a powerful 100W Osram Sirius HRI discharge lamp that produces a razor-sharp 3-degree beam. This manual provides essential information for the safe installation, operation, and maintenance of your unit. Please read these instructions thoroughly before operating the fixture to ensure proper use and to prolong its lifespan.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for brand, elektrisk stød eller personskade:
- Elektrisk sikkerhed: Sørg for, at strømforsyningen voltage matches the fixture's requirements. Always disconnect from power before servicing or cleaning.
- Jording: This fixture must be properly grounded to prevent electric shock.
- Udendørs brug: The HYDRO BEAM X1 is IP65 rated for outdoor use. Ensure all connections are securely sealed with their rubber protective covers when used outdoors.
- Montering: Always mount the fixture securely using appropriate clamps and safety cables. Ensure the mounting surface can support the fixture's weight.
- Varme: Allow adequate ventilation around the fixture. Do not operate in enclosed spaces. Maintain a minimum distance of 0.5 meters from flammable materials.
- Øjensikkerhed: Avoid direct eye exposure to the light source. Never look directly into the beam.
- Service: Overlad al service til kvalificeret servicepersonale. Forsøg ikke at reparere enheden selv.
3. Pakkens indhold
Bekræft, at din pakke indeholder følgende varer:
- 1 x American DJ HYDRO BEAM X1 Moving Head Beam Light
- 1 x Power Cable (IP65 rated)
- 1 x Brugermanual (dette dokument)
- 2 x Omega Brackets with Quick-Lock Fasteners
4. Produktet er slutview
The HYDRO BEAM X1 is a robust and versatile moving head fixture. Key features include a 100W LED light source, precise pan and tilt movement, a 3-degree beam angle, and an IP65 rating for environmental protection. It supports DMX512 control and offers wireless DMX capabilities.
Figur 4.1: Forside view of the HYDRO BEAM X1, showing the light output lens and control panel.
The rear panel features all necessary connections, including 5-pin DMX In/Out, locking power In/Out, and a USB port for software updates. All connections are IP65 rated with rubber protective covers to ensure water and dust resistance.
Figur 4.2: Bagside view of the HYDRO BEAM X1, highlighting the DMX, power, and USB connections.
The fixture also includes a 16-facet circular prism with overlay and an independent frost filter for wash effects, allowing for diverse visual outputs.
Figure 4.3: Visual representation of the 16-facet circular prism effect (left) and the frost filter for wash effects (right).
5. Opsætning
5.1 Montering
The HYDRO BEAM X1 can be mounted in various positions (truss, floor, wall) using the included Omega brackets. Always ensure the fixture is securely fastened and use a safety cable as a secondary attachment.
- Attach the Omega brackets to the bottom of the fixture using the quick-lock fasteners.
- Secure the brackets to a truss or other suitable mounting structure using appropriate clamps (medfølger ikke).
- Always attach a safety cable from the fixture to the mounting structure.
5.2 Strømtilslutning
Connect the supplied IP65-rated power cable to the locking power input on the rear of the fixture. Ensure the power source matches the voltage requirements specified on the fixture.
5.3 DMX-tilslutning (valgfrit)
For DMX control, connect a 5-pin DMX cable from your DMX controller to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain DMX cables from the DMX OUT of one fixture to the DMX IN of the next. Ensure all DMX connections are sealed with their rubber covers.
5.4 Trådløs DMX-opsætning
The HYDRO BEAM X1 features built-in wireless DMX. Refer to the fixture's internal menu for wireless DMX pairing instructions. Typically, this involves setting a common wireless DMX address or group for all fixtures and the transmitter.
6. Betjeningsvejledning
The HYDRO BEAM X1 is controlled via a digital display and four buttons: MENU, UP, DOWN, and ENTER. These buttons allow navigation through the menu options and adjustment of settings.
6.1 Kontrolpanel
- MENU: Accesses the main menu or returns to the previous menu level.
- OP NED: Navigerer gennem menupunkter eller justerer parameterværdier.
- GÅ IND: Bekræfter et valg eller gemmer en indstilling.
6.2 DMX-adressering
To control the fixture via DMX, you must set a unique DMX start address for each unit. Use the control panel to navigate to the DMX Address setting and adjust the value. Consult your DMX controller's manual for channel assignments and programming.
6.3 DMX-kanaltilstande
The HYDRO BEAM X1 offers multiple DMX channel modes (e.g., 14-channel, 16-channel). Select the desired mode via the control panel to match your DMX controller's setup. Each mode provides different levels of control over the fixture's features (Pan, Tilt, Dimmer, Strobe, Color, Gobo, Prism, Frost, Focus, etc.).
6.4 Stand-alone betjening
The fixture can operate without a DMX controller using its built-in programs:
- Auto Program Mode: Select from various pre-programmed light shows. Adjust speed and other parameters via the menu.
- Lyd aktiv tilstand: The fixture will react to sound via its internal microphone. Adjust sensitivity as needed.
7. Vedligeholdelse
Regular maintenance ensures optimal performance and extends the life of your HYDRO BEAM X1.
- Rensning: Rengør udvendigt med jævne mellemrumasing, lenses, and cooling fins with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure the fixture is powered off and cool before cleaning.
- Firmwareopdateringer: Tjek den amerikanske DJ website for available firmware updates. Updates can be installed via the USB port on the rear of the fixture. Follow the instructions provided with the firmware update package.
- Inspektion: Undersøg regelmæssigt strømkabler, DMX-kabler og monteringsudstyr for tegn på slid eller skader. Udskift beskadigede komponenter med det samme.
- Opbevaring: Når armaturet ikke er i brug, skal det opbevares tørt og støvfrit, helst i originalemballagen eller en passende flightcase.
8. Fejlfinding
If you encounter issues with your HYDRO BEAM X1, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Armaturet tænder ikke | No power supply; Faulty cable; Internal fuse blown | Check power connection; Test cable; Contact service for fuse replacement. |
| Ingen DMX kontrol | Incorrect DMX address; Faulty DMX cable; Incorrect DMX mode; DMX terminator missing | Verify DMX address; Check/replace DMX cables; Ensure DMX mode matches controller; Use a DMX terminator on the last fixture. |
| Fixture not responding to wireless DMX | Not paired; Interference; Transmitter issue | Re-pair the fixture with the wireless DMX transmitter; Check for sources of interference; Verify transmitter operation. |
| Movement is erratic or restricted | Mechanical obstruction; Calibration issue; DMX signal problem | Check for obstructions; Perform a fixture calibration via the menu; Verify DMX signal integrity. |
| Lysudbyttet er svagt eller ujævnt | Dirty lens; LED degradation; Internal fault | Clean the lens; Contact service if LED performance is degraded. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | HYD100 |
| Lyskilde | 100W Osram Sirius HRI Discharge Lamp |
| Strålevinkel | 3 grader |
| DMX kanaler | Multiple DMX channel modes available |
| Kontrollere | DMX512, Wireless DMX, Standalone (Auto, Sound Active) |
| Forbindelser | 5-pin DMX In/Out, Locking Power In/Out, USB Port |
| IP-vurdering | IP65 (støv- og vandafvisende) |
| Produktdimensioner | 17 x 14.5 x 21 tommer (43.18 x 36.83 x 53.34 cm) |
| Varens vægt | 2 pund (0.91 kg) |
| Fabrikant | Amerikansk DJ |
| Dato først tilgængelig | 9. januar 2019 |
10. Garanti og support
American DJ products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official American DJ website. For technical support, service, or parts, please contact American DJ customer service. They offer exceptional customer support and have over 35 years of experience in the industry.
Kontaktoplysninger: Besøg venligst www.adj.com for the latest support information, contact details, and service centers.
