Aquascape Stacked Slate Sphere Water Fountain

1. Introduktion

This manual provides instructions for the installation, operation, and maintenance of your Aquascape Stacked Slate Sphere Water Fountain, Model 78288. This water feature is designed to add the sights and sounds of water to your outdoor environment. The fountain is constructed from a durable fiber-resin composite, providing the aesthetic of natural stacked slate.

Image 1.1: Aquascape Stacked Slate Sphere Water Fountain (Model 78288)

2. Sikkerhedsoplysninger

Read and understand all instructions before installing and operating this product. Failure to follow these instructions may result in electrical shock, fire, or serious injury.

• Elektrisk sikkerhed: Always disconnect power to the pump before performing any maintenance or installation. Ensure the power cord is protected from sharp objects and excessive heat. Do not operate if the cord is damaged.
• Vandsikkerhed: Do not allow children or pets to play with the fountain unsupervised. Ensure the fountain is placed on a stable, level surface to prevent tipping.
• Installation: Use only approved components and follow all local electrical and plumbing codes.
• Generel: This product is for outdoor use only. Do not use with flammable liquids.

3. Pakkens indhold

The Aquascape Stacked Slate Sphere Water Fountain (Model 78288) package includes:

• One (1) Aquascape Stacked Slate Sphere Water Fountain (32-inch diameter)

Items Sold Separately (Required for Operation):

• AquaBasin 45 basin reservoir (Item # 78224) for water storage and circulation.
• Ultra 1500 Water Pump (Item # 91009) for water circulation.
• Appropriate tubing and fittings to connect the pump to the fountain.

Valgfrit tilbehør (sælges separat):

• Aquascape Fire Fountain Add-On Kit (Item # 78221) for adding a fire element.

4. Opsætning

4.1 Valg af sted

Choose a level location in your yard or garden that has access to a GFCI-protected electrical outlet. Ensure the area can support the weight of the fountain when filled with water. Consider proximity to trees or plants that may drop debris into the fountain.

4.2 Basin Installation

Install the AquaBasin 45 (or equivalent reservoir) according to its specific instructions. The basin should be buried flush with the ground or placed on a stable surface, ensuring it is level.

4.3 Pump and Tubing Connection

1. Place the Ultra 1500 Water Pump inside the basin.
2. Connect appropriate tubing from the pump outlet to the inlet at the bottom of the Stacked Slate Sphere fountain. Ensure all connections are secure to prevent leaks.
3. Route the pump's power cord out of the basin, ensuring it is not pinched or damaged.

Billede 4.1: Eks.ample of fountain installation with basin and pump connections.

4.4 Fountain Placement

Carefully place the Stacked Slate Sphere fountain onto the installed basin, ensuring the tubing is properly aligned and not kinked. The fountain should sit securely and level on the basin.

Image 4.2: The fountain integrated into a landscape.

4.5 Filling the Basin

Udfyld b'etasin with clean water until the pump is fully submerged and the water level is sufficient for the fountain to operate without drawing air. The water will circulate up through the center of the sphere and cascade over its stacked slate texture.

5. Betjening

5.1 Første opstart

Når basin is filled, plug the pump into a GFCI-protected electrical outlet. Water should begin to flow from the top of the sphere and cascade down. Allow a few minutes for the water to fully circulate and settle.

5.2 Vandstandsovervågning

Kontroller regelmæssigt vandstanden i basin, especially during warm or windy weather, as evaporation will occur. Refill as needed to ensure the pump remains fully submerged and operates efficiently.

5.3 Justering af vandgennemstrømning

If your pump has an adjustable flow rate, you can modify it to achieve your desired water effect. Refer to your pump's instruction manual for specific adjustments.

6. Vedligeholdelse

6.1 Regelmæssig rengøring

• Fjernelse af affald: Periodically remove leaves, twigs, and other debris from the basin and the fountain surface to prevent clogging and maintain water quality.
• Algae Control: Algae can form in water features. Use an appropriate, pond-safe algaecide or beneficial bacteria treatments to control algae growth. Clean the fountain surface with a soft brush and water as needed.
• Pumpe rengøring: Disconnect power to the pump and remove it from the basin. Clean the pump impeller and intake screen to ensure optimal performance. Refer to your pump's manual for detailed cleaning instructions.

6.2 Vinterisering

In regions with freezing temperatures, proper winterization is crucial to prevent damage to the fountain and pump.

• Afløbsvand: Completely drain all water from the fountain and basin.
• Fjern pumpen: Disconnect and remove the pump. Clean it thoroughly and store it in a frost-free location submerged in a bucket of water to keep seals lubricated.
• Cover Fountain: Clean the fountain surface. If possible, move the fountain to a protected area. If it must remain outdoors, cover it with a breathable, waterproof cover to protect it from snow and ice.

7. Fejlfinding

8. Specifikationer

Image 8.1: Available sizes of Aquascape Stacked Slate Sphere Fountains.

9. Garanti og support

For warranty information and customer support, please refer to the official Aquascape webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Aquascape Contact Information:

• Webwebsted: www.aquascapeinc.com
• Se produktemballagen for specifikke kontaktoplysninger eller regionale supportnumre.