Climma Marine klimaanlæg B 220 V 12000 Btu/t brugermanual
Model: 50.241.12
1. Vigtige sikkerhedsoplysninger
Please read all instructions carefully before installing or operating the unit. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Sørg for, at strømforsyningen stemmer overens med enhedens specifikationer (220V).
- Alle elektriske tilslutninger skal udføres af en kvalificeret elektriker i overensstemmelse med lokale og nationale el-forskrifter.
- Do not operate the unit with damaged power cords or plugs.
- Keep hands and objects clear of moving parts and air vents.
- Bloker ikke luftindtag eller udstødningsventiler.
- Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af apparatet af en person, der er ansvarlig for deres sikkerhed.
2. Produktet er slutview
The Climma Marine Air Conditioner is designed to provide efficient cooling and dehumidification for marine environments. Its compact design allows for flexible installation.
2.1 Komponenter
- Main Unit (Compressor, Evaporator, Condenser)
- Control Panel (Integrated or Remote)
- Drainage Hose Connection
- Air Intake/Exhaust Connections
2.2 Funktioner
- Kølekapacitet: 12000 Btu/t
- Voltage: 220 volt
- Special Feature: Dehumidifier
- Kontrolmetode: Fjernbetjening
An image showing the compact design of the Climma marine air conditioner unit, highlighting its main components including the compressor, heat exchanger coils, and integrated control panel.
3. Installation og opsætning
3.1 Udpakning
Carefully remove the unit from its packaging. Inspect for any shipping damage. Retain packaging for future transport or storage.
3.2 Monteringsovervejelser
Select a stable, level location that can support the unit's weight. Ensure adequate clearance around the unit for proper airflow and maintenance access. Consider the routing of air ducts and drainage lines.
3.3 Elektrisk tilslutning
Connect the unit to a dedicated 220V power supply circuit. Ensure the circuit is protected by an appropriately sized circuit breaker. Consult a qualified electrician for all electrical wiring.
3.4 Drainage and Ducting
Connect the drainage hose to the unit's condensate drain outlet and route it to a suitable discharge point, ensuring a continuous downward slope for gravity drainage. Install air intake and exhaust ducts according to the system design, ensuring airtight connections.
4. Betjeningsvejledning
4.1 Kontrolpanel overview
The unit features an integrated control panel and can also be operated via a remote control. Common controls include Power On/Off, Mode Selection, Temperature Adjustment, and Fan Speed.
4.2 Grundlæggende betjening
- Tænd/sluk: Tryk på tænd/sluk-knappen på kontrolpanelet eller fjernbetjeningen for at tænde eller slukke enheden.
- Valg af tilstand: Use the Mode button to cycle through available modes: Cooling, Dehumidify.
- Temperaturjustering: Use the Up/Down arrows to set the desired temperature in Cooling mode.
- Blæserhastighed: Adjust fan speed (Low, Medium, High) as needed for comfort and noise level.
4.3 Fjernbetjening
Point the remote control directly at the unit's receiver. Ensure there are no obstructions between the remote and the unit. Replace batteries when the remote's range decreases.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på dit klimaanlæg.
5.1 Regelmæssig rengøring
- Luftfiltre: Clean or replace air filters every 2-4 weeks, or more frequently in dusty environments. Dirty filters reduce efficiency and airflow.
- Spoler: Periodically inspect and clean the evaporator and condenser coils. Use a soft brush or vacuum cleaner to remove dust and debris.
- Afløbsbakke og -ledning: Check the condensate drain pan and line for blockages or algae growth. Clean as necessary to prevent overflow.
5.2 Sæsonbestemt vedligeholdelse
Before and after the cooling season, perform a thorough inspection. Check all electrical connections for tightness and signs of corrosion. Ensure all components are securely mounted.
6. Fejlfinding
Se tabellen nedenfor for almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | No power supply; Circuit breaker tripped; Remote control batteries dead | Check power connection; Reset circuit breaker; Replace remote batteries |
| Enheden køler ikke effektivt | Dirty air filter; Blocked air vents; Low refrigerant; Incorrect mode setting | Clean/replace filter; Clear vents; Contact service for refrigerant check; Select Cooling mode |
| Vand lækker fra enheden | Blocked drain line; Unit not level | Clear drain line; Ensure unit is level |
| Usædvanlig støj | Loose parts; Fan obstruction | Check for loose components; Remove any obstructions from fan |
7. Tekniske specifikationer
| Specifikation | Værdi |
|---|---|
| Mærke | Osculati |
| Modelnummer | 50.241.12 |
| Kølekapacitet | 12000 British Thermal Units (Btu/h) |
| Voltage | 220 volt |
| Speciel funktion | Affugter |
| Materiale Type | Metal |
| Kontrolmetode | Fjern |
| Strømkilde | Elektrisk med ledning |
8. Garanti og kundesupport
This product comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Osculati customer support through their official webstedet eller autoriserede servicecentre.
Keep your purchase receipt and model number (50.241.12) readily available when contacting support.
