Indledning
Tak for købetasing the Perel PHS2000 Infrared Patio Heater. This 2000W outdoor heater is designed to provide efficient and comfortable warmth for your patio, balcony, or garden. Featuring a robust design, adjustable height, and multiple heat settings, it is an ideal solution for extending your outdoor enjoyment.
Please read this manual thoroughly before operating the device to ensure safe and proper use, and keep it for future reference.
Image: The Perel PHS2000 Infrared Patio Heater, a tall, black, freestanding unit with an oval heating element at the top, designed for outdoor use.
Sikkerhedsinstruktioner
Always follow these basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Kun udendørs brug: This heater is designed exclusively for outdoor use. Do not use it indoors or in enclosed spaces.
- Brandfarlige materialer: Maintain a safe distance of at least 1 meter (3 feet) from all flammable materials such as furniture, curtains, paper, clothing, and chemicals.
- Strømforsyning: Sørg for, at strømforsyningen voltage (230V) matches the rating on the heater. Use a grounded outlet.
- Kabelstyring: Do not run the power cord under carpeting or cover it with throw rugs. Arrange the cord away from traffic areas to prevent tripping hazards.
- Vandeksponering: Although rated IP34 (splash-proof), avoid direct exposure to heavy rain or excessive moisture. Do not immerse the heater in water.
- Overvågning: Lad ikke varmeapparatet være uden opsyn, mens det er i brug. Hold børn og kæledyr væk fra varmeapparatet.
- Ventilation: Ensure adequate ventilation around the heater. Do not block air inlets or outlets.
- Opretholdelse: Disconnect the power plug before cleaning or performing any maintenance.
- Skade: Do not operate the heater with a damaged cord or plug, or if the heater malfunctions or has been dropped or damaged in any manner.
- Stabilitet: Always place the heater on a firm, level, and stable surface to prevent tipping. The heater includes tilt protection, which will automatically shut off the unit if it tips over.
Image: The Perel PHS2000 heater positioned on a patio next to outdoor furniture, demonstrating its intended use in an outdoor living space.
Produktkomponenter
Familiarize yourself with the main parts of your Perel PHS2000 heater:
- Heating Head: Contains the infrared heating elements and protective grille.
- Justerbar stang: Allows for height adjustment of the heating head.
- Grundlag: Provides stability for the freestanding unit.
- Pull String Switch: Used to cycle through heat settings and turn the unit on/off.
- Tilt Adjustment Knob: Located on the side of the heating head, allows for adjusting the tilt angle.
- Strømledning: Tilslutter varmelegemet til stikkontakten.
Opsætning og montering
The Perel PHS2000 heater requires minimal assembly. Follow these steps:
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere opbevaring, hvis det ønskes.
- Basissamling: Attach the adjustable pole to the sturdy base. Ensure all screws are tightened securely to provide maximum stability.
- Heating Head Attachment: Secure the heating head to the top of the adjustable pole. Follow the instructions provided in the assembly diagram (if applicable, refer to product packaging for detailed diagrams).
- Placering: Place the assembled heater on a flat, stable, and non-combustible surface outdoors. Ensure it is at least 1 meter (3 feet) away from any walls, ceilings, or flammable objects.
- Strømtilslutning: Plug the power cord into a suitable 230V grounded outdoor electrical outlet. Ensure the outlet is protected from moisture.
Image: A graphic illustrating the key features of the heater: height-adjustable pole, built-in tilt protection for safety, and simple operation.
Betjeningsvejledning
Operating your Perel PHS2000 heater is straightforward:
- Tænd/sluk og varmeindstillinger:
The heater is controlled by a pull string switch. Pull the string to cycle through the following settings:
- 1st Pull: Low Heat (approx. 650W)
- 2nd Pull: Medium Heat (approx. 1300W)
- 3rd Pull: High Heat (approx. 2000W)
- 4th Pull: Off
Image: A close-up diagram of the heater's control panel, indicating the pull string mechanism and the three available heat settings: 650W (low), 1300W (intermediate), and 2000W (high).
- Justering af højde:
The heater's pole is height-adjustable from 180 cm to 210 cm. Loosen the locking mechanism on the pole, adjust to the desired height, and then securely tighten the mechanism.
- Justering af hældningsvinkel:
The heating head can be tilted up to 45 degrees. Loosen the tilt adjustment knob on the side of the heating head, position the head to direct heat as desired, and then tighten the knob firmly.
Image: A visual representation of the heater head tilting up to 45 degrees, demonstrating its adjustable heat direction feature.
Vedligeholdelse og opbevaring
Regelmæssig vedligeholdelse sikrer varmeapparatets levetid og sikre drift.
- Rensning:
Før rengøring skal du altid tage stikket ud af varmelegemet og lade det køle helt af. Brug en blød, tør klud.amp cloth to wipe down the exterior. Do not use abrasive cleaners, solvents, or immerse the heater in water. Clean the reflector and heating elements carefully with a soft, dry cloth to maintain efficiency.
- Opbevaring:
When not in use for extended periods, store the heater in a cool, dry place, protected from dust and moisture. It is recommended to use the original packaging for storage.
- Inspektion:
Periodically inspect the power cord and plug for any signs of damage. If any damage is found, do not use the heater and contact qualified service personnel.
Fejlfinding
Hvis du støder på problemer med din varmelegeme, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Varmeapparatet tænder ikke. | No power supply; Power cord not plugged in; Tilt switch activated; Faulty pull string switch. | Check power outlet and circuit breaker; Ensure plug is fully inserted; Ensure heater is upright on a stable surface; Contact customer support if switch is faulty. |
| Varmeapparatet slukker uventet. | Overheating protection activated; Heater tipped over (tilt switch). | Unplug and let cool for 30 minutes, then restart; Ensure heater is on a stable, level surface. |
| Utilstrækkelig varmeafgivelse. | Incorrect heat setting; Heater too far from target area; Dirty heating elements/reflector. | Select a higher heat setting; Move heater closer to the desired area; Clean heating elements and reflector as per maintenance instructions. |
If the problem persists after trying these solutions, please contact Perel customer support.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Perel |
| Modelnummer | PHS2000 |
| Strømudgang | 2000 W (maks.) |
| Voltage | 230 V |
| Varmeindstillinger | 3 (650W, 1300W, 2000W) |
| IP beskyttelsesklasse | IP34 (stænksikker) |
| Tilt vinkel | Op til 45° |
| Højdejustering | 180 cm - 210 cm |
| Produktmål (D x B x H) | 20 x 50 x 200 cm (ca.) |
| Vægt | 9 kg (ca.) |
| Strømkilde | Elektrisk med ledning |
| Anbefalet brug | Terrace, Balcony, Garden |
Image: A diagram illustrating the dimensions (height 180-210 cm, head width 50 cm, head depth 20 cm) and weight (8.4 kg) of the Perel PHS2000 heater.
Garanti og support
Perel products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Perel website. For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact your retailer or Perel customer service.
Kontaktoplysninger: Please refer to the contact details provided on the product packaging or the official Perel webwebstedet for de mest opdaterede supportoplysninger.
