TFA Dostmann 35.1150.01 Trådløs Vejrstation Brugsanvisning

1. Introduktion

Welcome to your new TFA Dostmann 35.1150.01 Wireless Weather Station. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device to ensure optimal performance and longevity. Please read this manual thoroughly before using the weather station.

Figur 1: The main display unit of the TFA Dostmann 35.1150.01 Wireless Weather Station, showing outdoor and indoor temperature/humidity, weather forecast, moon phase, relative pressure history, and time/date.

2. Pakkens indhold

Kontroller venligst pakkens indhold for at sikre, at alle varer er til stede:

• TFA Dostmann 35.1150.01 Main Display Unit
• Wireless Outdoor Temperature/Humidity Sensor
• Instruktionsmanual

3. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre skader på enheden eller personskade:

• Udsæt ikke hovedenheden for ekstreme temperaturer, direkte sollys eller fugt.
• The outdoor sensor is weather-resistant but should be placed in a sheltered location to prolong its lifespan.
• Use only the specified battery type (AA) and ensure correct polarity during installation.
• Bland ikke gamle og nye batterier eller forskellige typer batterier.
• Fjern brugte batterier med det samme for at forhindre lækage.
• Opbevar batterier utilgængeligt for børn.
• Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret personale for service.

4. Opsætning

4.1 Batteriinstallation

1. Hoveddisplayenhed: Open the battery compartment cover on the back of the main unit. Insert 3 new AA batteries, observing the correct polarity (+/-). Close the cover.
2. Trådløs udendørs sensor: Open the battery compartment cover on the back of the outdoor sensor. Insert 2 new AA batteries, observing the correct polarity (+/-). Close the cover.

4.2 Sensorplacering

For accurate readings and optimal wireless transmission:

• Place the outdoor sensor in a location that is sheltered from direct sunlight and rain.
• Ensure the sensor is mounted vertically and away from heat sources (e.g., vents, windows) or cold sources (e.g., air conditioning units).
• The maximum transmission range between the main unit and the sensor is approximately 100 meters (330 feet) in open areas. Walls, metal structures, and electronic devices can reduce this range.

Figur 2: The wireless outdoor temperature and humidity sensor, designed for remote placement.

4.3 Indledende synkronisering

After inserting batteries into both units, the main display unit will automatically search for the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature and humidity readings will appear on the main display.

• If the outdoor readings do not appear, press the 'SEARCH' or 'CHANNEL' button on the main unit (if available) to initiate a manual search.
• Ensure both units are within range and free from interference.

5. Betjening af vejrstationen

5.1 Display overview

Hoveddisplayenheden giver et omfattende overblikview of weather data:

• Udendørs sektion: Displays current outdoor temperature and humidity, along with signal strength for the wireless sensor.
• Indendørs sektion: Viser den aktuelle indetemperatur og luftfugtighed.
• Vejrudsigt: Weather forecast icons (e.g., sunny, cloudy, rainy) based on atmospheric pressure changes.
• Månefase: Indicates the current phase of the moon.
• Relative Pressure History: A bar graph showing atmospheric pressure trends over the last 12 or 24 hours.
• Tid og dato: Displays the current time, day of the week, and date.

5.2 Button Functions (General)

While specific button labels may vary, common functions include:

• MODE/SET: Used to cycle through display modes or enter setting mode.
• UP/DOWN (or +/-): Used to adjust values during setting mode or view historiske data.
• KANAL: If multiple outdoor sensors are supported, this button cycles through sensor channels.
• ALERT: To set temperature or humidity alerts.

5.3 Indstilling af tid og dato

Refer to the specific instructions in your manual for detailed steps on setting the time, date, and alarm functions. Typically, this involves pressing and holding the 'SET' or 'MODE' button to enter setting mode, then using 'UP'/'DOWN' buttons to adjust values and 'SET'/'MODE' to confirm and move to the next setting.

5.4 Valg af enhed (°C/°F)

Most weather stations allow you to switch between Celsius (°C) and Fahrenheit (°F) for temperature readings. Look for a dedicated button or a setting option within the 'SET' menu.

6. Vedligeholdelse

• Rensning: Tør displayenheden og sensoren af ​​med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af batteri: Replace batteries in both units when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Sensorpleje: Periodically check the outdoor sensor for debris or insect nests that might obstruct its ventilation openings.

7. Fejlfinding

8. Tekniske specifikationer

Figur 3: The main display unit with indicated dimensions: 17.5 cm width, 16.5 cm height, and 3.2 cm depth.

9. Garanti og support

TFA Dostmann products are manufactured with quality and precision. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official TFA Dostmann website. For technical support or service inquiries, please contact your retailer or the TFA Dostmann customer service department.

Gem venligst din købsbevis i tilfælde af garantikrav.