1. Introduktion
This manual provides essential information for the safe and efficient operation of your Goplus 1.6HP Shallow Well Pump with Pressure Tank. This pump is designed for various water supply applications, including residential homes, farms, cabins, and irrigation systems. It features a 1200W motor, a 5-gallon pressure tank, and is capable of delivering up to 1000 GPH with a maximum lift of 164 feet.

Billede 1.1: Overview of the Goplus Shallow Well Pump with Pressure Tank, highlighting its purpose to enhance water experience.
2. Sikkerhedsinstruktioner
Følg altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade.
- Ensure the power supply matches the pump's specifications (120V/60Hz).
- Brug ikke pumpen med en beskadiget ledning eller stik.
- Hold børn og uautoriserede personer væk fra den pumpe, der er i drift.
- Disconnect power before servicing or performing maintenance.
- Beskyt pumpen mod frost.
- Sørg for korrekt jording for at forhindre elektrisk stød.
- Do not pump flammable or corrosive liquids.
- The pump is rated IPX4 for splash resistance; avoid submerging it.
3. Produktkomponenter
Familiarize yourself with the main components of your shallow well pump:

Image 3.1: Detailed diagram illustrating the various parts of the Goplus Shallow Well Pump, including the motor, pressure tank, and controls.
- Motor: 1.6HP permanent magnet separation capacitor motor with 1200W power.
- Tryktank: 5-gallon capacity to maintain consistent water pressure.
- Trykmåler: Displays real-time pressure within the system.
- Automatisk trykafbryder: Automatically turns the pump ON when pressure drops below 20 PSI and OFF when it reaches 40 PSI.
- Sikkerhedsafbryder: Provides overheat protection and is IPX4 rated.
- Skydeventil: For nem betjening og kontrol.
- Varmeafledningsventil: Ensures proper cooling of the motor.
- Inlet (1" NPT): Connection point for water intake.
- Outlet (1" NPT): Connection point for water discharge.
- Skridsikker base: Giver stabilitet under drift.
- Strømledning: 4 ft long cord for electrical connection.
4. Opsætning og installation
Proper installation is crucial for optimal performance and longevity of your pump.
4.1 Valg af sted
- Choose a dry, level, and well-ventilated location.
- Ensure the pump is protected from direct sunlight, rain, and freezing temperatures.
- Place the pump as close to the water source as possible to minimize suction lift.
4.2 VVS-tilslutninger
- Connect the suction line (from the water source) to the 1" NPT Inlet.
- Connect the discharge line (to your irrigation system or home) to the 1" NPT Outlet.
- Use appropriate thread sealant on all connections to prevent leaks.
- Ensure all pipes are securely fastened and supported.
4.3 Spædning af pumpen
Before first use or after the pump has run dry, it must be primed:

Image 4.1: Illustration of adding clean water to the pump's priming port before initial operation.
- Sørg for, at alle forbindelser er tætte.
- Locate the priming port (usually a cap on top of the pump housing).
- Remove the priming cap.
- Slowly fill the pump housing with clean water until it overflows.
- Replace the priming cap securely.
- The pump is now primed and ready for operation.

Image 4.2: Visual guide demonstrating the priming process, emphasizing the use of clean water after connecting inlet and outlet hoses.
5. Betjeningsvejledning
Follow these steps for safe and effective operation of your Goplus pump.
- Sørg for, at pumpen er korrekt primet (se afsnit 4.3).
- Bekræft, at alle forbindelser er sikre og lækagefri.
- Sæt netledningen i en jordet 120V/60Hz stikkontakt.
- Turn on the safety switch. The pump will start automatically when the pressure drops below 20 PSI and stop when it reaches 40 PSI.
- Overvåg trykmåleren for at sikre korrekt drift.
- After use, if the pump will not be used for an extended period, disconnect power and drain the pump to prevent freezing.

Image 5.1: Diagram illustrating the pump's performance capabilities, including maximum lift (164 ft), maximum flow (1000 GPH), and maximum suction (26 ft).

Image 5.2: Flow diagram demonstrating how the pump moves water from a well to a tap, detailing flow rates at various lift heights.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer pumpens levetid og effektive drift.
- Rensning: Periodically clean the exterior of the pump. Do not use harsh chemicals.
- Vinterisering: In cold climates, drain the pump completely before freezing temperatures to prevent damage. Store in a dry, warm place.
- Inspektion: Regularly inspect the power cord, connections, and pump housing for any signs of wear or damage.
- Grunding: Re-prime the pump if it runs dry or after maintenance that involves draining the system.
7. Fejlfinding
Se dette afsnit for almindelige problemer og deres mulige løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pumpen starter ikke | Ingen strøm; udløst afbryder; defekt afbryder. | Kontroller strømforbindelsen; nulstil afbryderen; inspicer afbryderen. |
| Pumpen kører, men der kommer ikke noget vand | Pump not primed; air leak in suction line; clogged inlet. | Prime the pump; check suction line for leaks; clear inlet. |
| Lavt vandtryk | Partial clog; air in system; worn impeller. | Check for clogs; re-prime; contact service for impeller replacement. |
| Pumpen kører for ofte | Pressure tank issue; small leak in system. | Check pressure tank air charge; inspect system for leaks. |
| Pumpen overopheder og slukker | Motor overload; insufficient ventilation; running dry. | Allow to cool; ensure proper ventilation; ensure pump is primed. |
8. Specifikationer
Technical specifications for the Goplus 1.6HP Shallow Well Pump:

Image 8.1: Visual representation of the pump's dimensions and key performance specifications.
- Model: SU-25184
- Nominel effekt: 1.6 HP (1200W)
- Voltage: 120V/60Hz
- Max flowhastighed: 1000 GPH
- Max løft: 164 FT
- Max sugning: 26 FT
- Pressure Tank Capacity: 5 gallons
- Automatic Pressure Switch Settings: ON < 20 PSI, OFF > 40 PSI
- Indløbs-/udløbsstørrelse: 1" NPT
- Beskyttelsesklasse: IPX4
- Max vandtemperatur: 95°F (35°C)
- Materiale: Cast Iron (Motor Housing)
- Varens vægt: 30.2 lbs
- Strømkabellængde: 4 fod
9. Garanti og support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Goplus webwebsted. Du kan også besøge Goplus Store on Amazon for yderligere ressourcer.
Gem venligst din købskvittering i tilfælde af garantikrav.
10. Ansøgninger
The Goplus Shallow Well Pump is versatile and suitable for a variety of applications:
- Home Water Supply: Providing fresh well water to residential homes and cabins.
- Garden & Lawn Irrigation: Efficiently watering gardens, lawns, and agricultural structures.
- Water Boosting: Increasing water pressure for low-pressure systems.
- Cleaning Tasks: Suitable for tasks like car washing or general outdoor cleaning.
- Pool vedligeholdelse: Assisting with pool filling or drainage (ensure water is clean).

Billede 10.1: En collageudstillingasing various applications of the pump, including gardening, agriculture, pool maintenance, and cleaning.





