1. Introduktion
This manual provides detailed instructions for setting up, operating, and maintaining your ARRIS SURFboard mAX W130 Tri-Band Mesh WiFi 6 System. This system is designed to provide extensive and high-speed wireless coverage throughout your home, leveraging Tri-Band technology and Wi-Fi 6 for optimal performance.
1.1 Pakkens indhold
The ARRIS SURFboard mAX W130 system typically includes:
- Two (2) SURFboard mAX W30 units
- To (2) strømadaptere
- Et (1) Ethernet-kabel
- Lynstartguide (se denne manual for yderligere oplysninger)
Image: The ARRIS SURFboard mAX W130 system, showing the product packaging and the two cylindrical mesh units.
2. Opsætningsvejledning
Follow these steps to set up your ARRIS SURFboard mAX W130 Mesh WiFi 6 System.
2.1 Før du begynder
- Ensure your existing modem/router is configured in bridge mode if you intend to use the SURFboard mAX as your primary router. Consult your internet service provider or modem/router manual for instructions on enabling bridge mode.
- Download SURFboard Central app on your smartphone or tablet. This app is essential for setup and management.
- Ensure Bluetooth is enabled on your mobile device for the initial setup process.
Image: An icon indicating the download of the SURFboard Central app.
2.2 Step-by-Step Setup
- Placering: Place the primary SURFboard mAX unit near your existing modem. Ensure it is in an open area, away from obstructions and other electronic devices that may cause interference.
- Connect Primary Unit:
- Connect one end of the provided Ethernet cable to the WAN/LAN port on the bottom of the primary SURFboard mAX unit.
- Connect the other end of the Ethernet cable to an available LAN port on your modem (or the WAN port if your modem is in bridge mode).
- Connect the power adapter to the primary SURFboard mAX unit and plug it into a power outlet.
- App-guidet opsætning:
- Open the SURFboard Central app on your mobile device.
- Follow the on-screen instructions within the app to configure your primary unit. The app will guide you through creating your Wi-Fi network name (SSID) and password.
- The initial setup uses Bluetooth, so keep your phone close to the primary unit.
- Place Satellite Unit: Once the primary unit is configured, the app will guide you on placing and connecting the satellite unit. Place the satellite unit in a central location within your home, ideally halfway between the primary unit and areas with weak Wi-Fi signal.
- Connect Satellite Unit:
- Connect the power adapter to the satellite SURFboard mAX unit and plug it into a power outlet.
- The satellite unit will automatically attempt to connect to the primary unit. The app will indicate when the connection is successful.
- Netværksoptimering: The mesh network will automatically optimize itself for the best performance as you move around your home.
Image: A smartphone displaying the SURFboard Central app interface, showing network speed, connected devices, and network optimization status.
Video: A short clip demonstrating the SURFboard mAX system in a home environment, highlighting its seamless integration and use by family members.
3. Betjening af dit system
The ARRIS SURFboard mAX W130 system provides advanced features for a robust and secure home network.
3.1 Tri-Band Wi-Fi 6 Technology
Your system utilizes Tri-Band (2.4GHz/5GHz/5GHz High) Wi-Fi 6 technology. This design dedicates one 5GHz band for communication between the mesh units (backhaul), ensuring a stable 1 Gbps connection. The other two bands (2.4GHz and 5GHz) are used for connecting your devices, optimizing speeds for both older 2.4GHz devices and newer, faster 5GHz devices. Each unit features eight Wi-Fi 6 streams, supporting speeds up to 7,800 Mbps and covering up to 6,000 sq ft.
Image: Logo indicating Tri-Band Gigabit Wi-Fi 6 technology.
Image: A diagram showing how the mesh WiFi system provides seamless coverage across multiple floors and rooms in a house.
Video: A short clip illustrating the system's capability to handle multiple, simultaneous 4K video streams, demonstrating its high performance.
3.2 SURFboard Central App Features
The SURFboard Central app provides comprehensive control over your network:
- Forældrekontrol: Set time limits, pause internet access for specific devices, and create reward-based activities for children.
- Who's Home: Receive alerts when devices connect or disconnect from your network.
- Servicekvalitet (QoS): Prioriter netværkstrafik til bestemte applikationer eller enheder (f.eks. spil, streaming).
- Gæstenetværk: Opret et separat Wi-Fi-netværk til gæster, og hold dit primære netværk sikkert.
- Enhedsparring: Easily manage and pair new devices to your network.
- Smart Home Integration (IFTTT, IoT): Enable IFTTT to connect with third-party smart home brands like Sonos, Fitbit, Ring, Philips Hue, and Google.
- Overvågning i realtid: View connected devices and network status.
Image: An icon symbolizing parental controls, depicting adult and child figures within a shield.
3.3 Alexa Support
The SURFboard mAX system supports Alexa commands, allowing for voice control of certain network functions. Refer to the SURFboard Central app or Alexa app for specific commands and integration details.
Image: The "Works with Alexa" logo, indicating compatibility with Amazon Alexa voice services.
4. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your SURFboard mAX system.
4.1 Generel pleje
- Keep the units in a cool, dry place, away from direct sunlight and heat sources.
- Ensure adequate ventilation around the units. Do not block the ventilation holes.
- Clean the units with a soft, dry cloth. Avoid using liquid cleaners or aerosols.
4.2 firmwareopdateringer
Your SURFboard mAX system is designed to automatically update its firmware to ensure the latest features and security enhancements. No manual intervention is typically required.
4.3 Rebooting the System
If you experience network issues, a simple reboot can often resolve them.
- Unplug the power adapter from both SURFboard mAX units.
- Vent i cirka 30 sekunder.
- Plug the power adapters back into both units.
- Allow a few minutes for the units to power on and re-establish the network connection.
If you unplug the primary unit, it may also be necessary to unplug and replug your modem to re-establish the internet connection.
5. Fejlfinding
This section addresses common issues you might encounter with your SURFboard mAX system.
5.1 Ingen internetforbindelse
- Tjek modemet: Sørg for, at dit internetmodem fungerer korrekt, og at der er en aktiv internetforbindelse.
- Kabelforbindelser: Verify that all Ethernet cables are securely connected between the primary SURFboard mAX unit and your modem.
- Genstart systemet: Perform a full system reboot as described in Section 4.3.
- Modem Bridge Mode: Confirm your modem is in bridge mode if the SURFboard mAX is acting as the primary router.
5.2 Weak or Intermittent Wi-Fi Signal
- Enhedsplacering: Ensure both units are placed in optimal locations, away from large metal objects, thick walls, and other sources of interference (e.g., microwaves, cordless phones).
- Backhaul Connection: If the backhaul connection between units is weak, try repositioning the satellite unit closer to the primary unit. The SURFboard Central app can help monitor signal strength.
- Interferens: Minimér interferens fra andre elektroniske enheder.
5.3 SURFboard Central App Issues
- Appen forbinder ikke: Ensure your mobile device is connected to the SURFboard mAX Wi-Fi network. If the app reports "Unable to connect to remote," this may indicate an issue with the system's cloud connectivity. A system reboot (Section 4.3) may resolve this.
- Begrænset funktionalitet: The app is the primary interface for managing the system. There is no separate web-based interface for advanced configurations.
5.4 Device Identification in App
The app may display devices by IP address or generic names. While you cannot rename devices directly within the app, you can often identify them by their IP address and then apply parental controls or QoS settings.
5.5 Nulstilling af systemet
If troubleshooting steps do not resolve your issues, you may need to perform a factory reset. This will erase all custom settings and return the system to its default configuration. Refer to the SURFboard Central app for instructions on performing a factory reset.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | ARRIS |
| Modelnavn | W130 |
| Trådløs type | 802.11ax (Wi-Fi 6) |
| Frekvensbåndsklasse | Tri-Band (2.4GHz, 5GHz, 5GHz High) |
| Max hastighed | Op til 7.8 Gbps (AX7800) |
| Dækning | Op til 6,000 sq ft |
| Forbindelsesteknologi | Ethernet, trådløs |
| Havne | WAN/LAN ports (Link Aggregation capable) |
| Operativsystemkompatibilitet | Android, iOS (for SURFboard Central app) |
| Særlige funktioner | LED Indicator, Parental Control, QoS, Alexa Support |
| Varens vægt | 8.22 pund (i alt for systemet) |
| Emnedimensioner (LxBxH) | 5 x 9.65 inches (per unit) |
| Farve | Sort |
| Voltage | 120-240 volt |
Billede: A view of the bottom of an ARRIS SURFboard mAX unit, detailing the power input, multiple Ethernet ports, and labels for WAN and LAC (Link Aggregation Control).
7. Garantioplysninger
For detailed warranty information regarding your ARRIS SURFboard mAX W130 Tri-Band Mesh WiFi 6 System, please refer to the official ARRIS webwebstedet eller garantikortet, der fulgte med dit produkt. Garantivilkårene kan variere afhængigt af region og forhandler.
8. Support
If you require further assistance or have questions not covered in this manual:
- SURFboard Central-appen: The app provides real-time monitoring and management tools, and may offer direct access to support resources.
- Online support: Besøg den officielle ARRIS-support webwebsted for ofte stillede spørgsmål, fejlfindingsvejledninger og kontaktoplysninger.
- Kundeservice: Contact ARRIS customer service directly for technical support.
