FeiTian bR301 C45

FEITIAN bR301-C45 BLE Bluetooth Smart Card Reader Brugsanvisning

Model: bR301 C45

1. Introduktion

This manual provides essential information for the proper setup, operation, and maintenance of your FEITIAN bR301-C45 BLE Bluetooth Smart Card Reader. This device is designed for secure ID authentication, e-payment, and access control applications, supporting various smart card types.

2. Sikkerhedsoplysninger

  • Udsæt ikke enheden for ekstreme temperaturer, fugt eller direkte sollys.
  • Undgå at tabe eller udsætte enheden for kraftige stød.
  • Forsøg ikke at skille enheden ad eller ændre den. Dette vil ugyldiggøre garantien.
  • Brug kun det medfølgende eller anbefalede opladningskabel.
  • Opbevares utilgængeligt for børn.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

  • FEITIAN bR301-C45 BLE Bluetooth Smart Card Reader
  • USB Type-C to USB-A Charging/Data Cable
  • Lynstartguide (ikke inkluderet i denne manual)
FEITIAN bR301-C45 BLE Smart Card Reader and USB cable in packaging

Figur 3.1: Package contents including the bR301-C45 reader and USB cable.

4. Produktet er slutview

Familiarize yourself with the components of your smart card reader.

Front view of FEITIAN bR301-C45 BLE Smart Card Reader

Figur 4.1: Front view of the bR301-C45 reader, showing the card insertion slot and FEITIAN logo.

Tilbage view of FEITIAN bR301-C45 BLE Smart Card Reader with regulatory marks

Figur 4.2: Tilbage view of the bR301-C45 reader, displaying regulatory compliance marks (RoHS, CE, FC) and Bluetooth logo.

FEITIAN bR301-C45 BLE Smart Card Reader connected via USB cable

Figur 4.3: The bR301-C45 reader connected to a USB cable, illustrating the USB-C port location.

5. Opsætning

5.1 Opladning af enheden

The bR301-C45 reader includes a 350mAh Li-Ion battery. Before initial use, or if the battery is low, charge the device using the provided USB cable.

  1. Connect the USB Type-C end of the cable to the reader's port.
  2. Connect the USB-A end of the cable to a powered USB port on a computer or a USB wall adapter.
  3. The device will indicate charging status (e.g., an LED indicator, refer to specific product documentation for LED behavior).

5.2 USB Connection (Plug and Play)

For direct connection to a computer, the bR301-C45 supports plug-and-play functionality, requiring no additional drivers for basic operation.

  1. Ensure the reader is charged or connected to a power source.
  2. Connect the USB Type-C end of the cable to the reader.
  3. Tilslut USB-A-enden af ​​kablet til en ledig USB-port på din computer.
  4. Your operating system should automatically detect and configure the device.

5.3 Bluetooth (BLE) Connection

The bR301-C45 can connect wirelessly via Bluetooth Low Energy (BLE) to compatible devices.

  1. Ensure the reader is sufficiently charged.
  2. Activate Bluetooth on your host device (e.g., smartphone, tablet, computer).
  3. Put the bR301-C45 into pairing mode (refer to specific product documentation for button presses or indicators).
  4. Søg efter available Bluetooth devices on your host device.
  5. Select "FEITIAN bR301-C45" or a similar identifier from the list and complete the pairing process.

Note: For certain applications, especially those involving government CAC or PIV cards, specific software or utilities (e.g., "Smart Card Utility") may be required on your host device. These applications may involve additional licensing or configuration steps not covered in this general manual. Consult the software provider's documentation for details.

6. Betjening af enheden

6.1 Inserting a Smart Card

  1. Identify the correct orientation for your smart card. Typically, the chip on the card faces upwards and is inserted into the reader.
  2. Gently slide the smart card into the card slot until it is fully seated. Do not force the card.
  3. The reader or associated software will indicate successful card detection.

6.2 Removing a Smart Card

To remove a smart card, gently pull it out from the slot. Ensure no active operations are being performed with the card before removal to prevent data corruption.

6.3 Brug med applikationer

Once connected and a smart card is inserted, the bR301-C45 reader facilitates secure communication between the smart card and your application. This includes:

  • Secure ID Authentication: For logging into systems or verifying identity.
  • E-Payment: For secure transactions.
  • Adgangskontrol: For gaining access to restricted areas or digital resources.

The specific steps for using the reader will depend on the application you are using. Refer to the documentation for your specific software or service.

7. Vedligeholdelse

7.1 Rengøring

To clean the device, use a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or solvents, as these can damage the device.

7.2 Pleje af batterier

  • Undgå at aflade batteriet helt ofte.
  • Opbevar enheden et køligt og tørt sted, når den ikke er i brug i længere perioder.
  • Oplad enheden med jævne mellemrum, hvis den opbevares i længere tid, for at opretholde batteriets tilstand.

8. Fejlfinding

  • Enhed ikke genkendt via USB:
    • Prøv en anden USB-port.
    • Ensure the USB cable is securely connected at both ends.
    • Genstart din computer.
  • Problemer med Bluetooth-parring:
    • Ensure the reader is in pairing mode.
    • Kontroller, at Bluetooth er aktiveret på din værtsenhed.
    • Move the reader closer to the host device.
    • Remove previous pairings and try again.
  • Smart card not detected:
    • Ensure the smart card is inserted correctly and fully seated.
    • Check if the smart card is damaged or dirty.
    • Verify that the necessary software/drivers are installed and configured on your computer for the specific smart card type.
  • Batteri oplades ikke:
    • Ensure the USB cable is functional and properly connected.
    • Prøv en anden USB-strømkilde.
    • Hvis problemet fortsætter, skal du kontakte support.

9. Specifikationer

Feature Detalje
Modelnummer bR301 C45
Forbindelse USB Type C, Bluetooth Low Energy (BLE)
Understøttede korttyper 1.8V, 3V, and 5V smart cards
Batteri 350mAh Li-ion (inkluderet)
Operativsystemkompatibilitet All operating systems (Plug & Play for USB)
Dimensioner (LxBxH) 3.66 x 2.09 x 0.31 tommer
Vægt 1.27 ounce
Farve Sort

10. Garantioplysninger

FEITIAN products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official FEITIAN webwebsted. Gem din købsbevis til garantikrav.

11. Support

For further assistance, technical support, or to download the latest drivers and software, please visit the official FEITIAN webwebsted:

http://ftsafe.com/

You may also contact FEITIAN customer service through the contact information provided on their webwebsted.

Relaterede dokumenter - bR301 C45

Preview FEITIAN R502 CL Smartcard-læser Brugermanual
Brugermanual til FEITIAN R502 CL Smartcard-læseren. Detaljer om specifikationer, funktioner, applikationer, firmwareopdateringer og fejlfinding for denne hurtige kontaktløse læser fra Feitian Technologies.
Preview FEITIAN BioPass FIDO2 sikkerhedsnøgle brugermanual
Omfattende brugermanual til FEITIAN BioPass FIDO2-sikkerhedsnøglen, der beskriver dens funktioner, opsætning, fingeraftryksregistrering, PIN-administration og tekniske specifikationer.
Preview Feitian F20 FP Introduktion og specifikationer
En introduktion til Feitian F20 FP, et smart mobilt POS-produkt med PCI PTS5.1-certificering, med detaljerede oplysninger om dets funktioner, specifikationer, installation og fejlfinding.
Preview FEITIAN ePass FIDO® -NFC & MultiPass FIDO® sikkerhedsnøgle brugermanual
Brugermanual til FEITIAN ePass FIDO® -NFC og MultiPass FIDO® sikkerhedsnøgler, der dækker opsætning, registrering til Googles 2-trinsbekræftelse og Advanced Protection Program samt godkendelse via USB, Bluetooth og NFC.
Preview FEITIAN M200 Uovervåget Android POS-terminal | Specifikationer og funktioner
FEITIAN M200 er en robust, uovervåget Android POS-terminal designet til forskellige detail-, hotel- og servicemiljøer. Den har Android 11, en 5.0" HD-skærm, 2MP-kamera og understøtter MSR-, IC-, NFC- og QR-kodebetalinger. Med IP65- og IK08-klassificeringer tilbyder den holdbarhed til krævende applikationer.
Preview FEITIAN AllinPass FIDO2 Plus: Biometrisk sikkerhedsnøgle til adgangskodefri godkendelse
Udforsk FEITIAN AllinPass FIDO2 Plus, en alsidig biometrisk sikkerhedsnøgle, der kombinerer adgangskodefri godkendelse, identifikationskort og fysisk adgang. Med forbedret tilslutningsmulighed (USB-C, BLE, NFC) og robust sikkerhed er den ideel til virksomhedsmiljøer.