Brugermanual til 200A højpræcisions effektanalysator med wattmeter

1. Produktet er slutview

The Makerfire 200A High Precision Power Analyzer Wattmeter is a professional battery tester designed for accurate measurement of electrical parameters. It is ideal for applications involving RC models, battery systems, solar installations, and wind power generation. This device provides real-time readings and accumulates data for comprehensive analysis.

Figure 1: The Makerfire 200A High Precision Power Analyzer Wattmeter, showing its LCD display with current and voltage aflæsninger.

This wattmeter conveniently calculates and displays voltage, current, power, charge (Amp-hour), and discharge time. It also captures and records peak current (Ap), maximum power (Wp), and minimum voltage (Vm) during operation, providing critical data for system performance evaluation and protection.

2. Sikkerhedsforanstaltninger

For at sikre sikker drift og forhindre skader på enheden eller personskade, bedes du overholde følgende forholdsregler:

• Voltage og strømgrænser: Overskrid ikke den maksimale volumentage of 60V or the maximum current of 200A. Exceeding these limits will damage the wattmeter and may cause personal injury.
• Beskyttelsesudstyr: Always use appropriate safety equipment when working with electrical systems.
• Proper Control: Ensure that current and voltage are properly controlled for your specific application.
• Inline Use Only: The wattmeter is designed as an inline meter for measurement purposes. Do not use it as a power supply.
• Sikre forbindelser: Loose connections can lead to component damage and inaccurate readings. Ensure all connections are secure.

Figure 2: The product packaging and included manual, which outlines safety precautions and wiring instructions.

3. Produktfunktioner

• Høj præcisionsmåling: Measures current from 0-200A (0.01A resolution) and voltage from 0-60V (0.01V resolution).
• Omfattende data: Calculates and displays voltage, current, power, charge (Amp-hour), and energy (Watt-hour).
• Peak and Minimum Value Capture: Records peak current (Ap), maximum power (Wp), and minimum voltage (Vm) during operation.
• LCD-baggrundsbelyst display: Features a 16x2 LCD screen with backlight for clear visibility in various lighting conditions, including direct sunlight.
• Wide Operating Voltage: Operates from 4.8V to 60V. Can function at 0V with an optional auxiliary battery.
• Overstrømsbeskyttelse: Helps prevent peak currents from damaging batteries, motor controllers, motors, wiring, and connectors.
• Effektivt design: Incorporates a ventilation hole design for heat dissipation and uses high-quality tin-copper core for high load capacity and low resistance.

Figure 3: The wattmeter's versatility, showing its application with different power sources such as batteries, solar panels, and wind turbines, as well as various loads.

4. Opsætning og forbindelser

The wattmeter is designed for inline measurement. Connect it between your power source (e.g., battery, solar panel) and your load (e.g., motor, RC aircraft). Ensure correct polarity and secure connections.

• Kildeforbindelse: Connect the "SOURCE" side of the wattmeter to your power source. The red wire is positive (+), and the black wire is negative (-).
• Belastningsforbindelse: Connect the "LOAD" side of the wattmeter to your device or system that consumes power. The red wire is positive (+), and the black wire is negative (-).
• Auxiliary Battery (Optional): For measurements at 0V or for powering the display when the main circuit voltage is too low, an optional auxiliary battery (6.0V-60V) can be connected to the dedicated port.

Figur 4: Detaljeret view of the wattmeter's connections, showing the "SOURCE" and "LOAD" terminals and the clear LCD display.

Figure 5: A close-up image highlighting the auxiliary battery port on the side of the wattmeter, used for powering the display independently.

5. Betjeningsvejledning

Once connected, the wattmeter will automatically power on and display real-time measurements on its LCD screen. The display shows various parameters simultaneously.

5.1. Vis aflæsninger

The LCD screen provides the following information:

• Nuværende (A): Instantaneous current flow in Amperes.
• Voltage (V): Øjeblikkelig voltage i volt.
• Effekt (W): Instantaneous power consumption in Watts.
• Charge (Ah): Accumulated charge in Amp-hours. This value accumulates until reset or power off.
• Energi (Wh): Accumulated energy in Watt-hours. This value accumulates until reset or power off.
• Peak Current (Ap): The highest current recorded during the measurement period.
• Maximum Power (Wp): The highest power recorded during the measurement period.
• Minimum Voltage (Vm): Den laveste voltage recorded during the measurement period.

5.2. Resetting Accumulated Values

The accumulated Charge (Ah) and Energy (Wh) values will reset when the device is powered off or manually reset. Refer to the included English manual for specific instructions on manual reset procedures, if available.

6. Vedligeholdelse

To ensure the longevity and accuracy of your wattmeter, follow these maintenance guidelines:

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the wattmeter in a cool, dry place away from direct sunlight and extreme temperatures.
• Forbindelser: Periodically check all connections for tightness and signs of wear or corrosion.
• Undgå påvirkning: Protect the device from drops and impacts, which can damage internal components or the LCD screen.

7. Fejlfinding

If you encounter issues with your wattmeter, refer to the following common troubleshooting steps:

8. Specifikationer

Figure 6: The physical dimensions of the wattmeter (83mm length, 42mm width, 24mm height) and an illustration of its ventilation system for heat dissipation.

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your product or contact Makerfire customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: PinBoTronix

Brand: Makerfire