Indledning
Thank you for choosing the Behringer NX4-6000 Ultra-Lightweight 6000-Watt 4-Channel Class-D Power AmpDenne manual indeholder vigtige oplysninger til sikker og effektiv drift af din nye amplifier. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its lifespan. Keep this manual for future reference.
The NX4-6000 is designed for professional audio applications, offering high power output in a compact and lightweight form factor. Its Class-D technology ensures high efficiency and cool operation, while the Smart Sense Loudspeaker Impedance Compensation provides reliable performance with various speaker loads.
Vigtige sikkerhedsinstruktioner
Følg altid disse grundlæggende sikkerhedsforanstaltninger, når du bruger elektrisk udstyr:
- Læs disse instruktioner.
- Gem disse instruktioner.
- Overhold alle advarsler.
- Følg alle instruktioner.
- Brug ikke dette apparat i nærheden af vand.
- Rengør kun med en tør klud.
- Bloker ikke nogen ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Undgå at omgå sikkerhedsformålet med det polariserede stik eller stik med jordforbindelse. Et polariseret stik har to knive, hvor den ene er bredere end den anden. Et stik med jordforbindelse har to knive og et tredje jordstik. Det brede blad eller det tredje ben er tilvejebragt for din sikkerhed. Hvis det medfølgende stik ikke passer i din stikkontakt, skal du kontakte en elektriker for at få udskiftet den forældede stikkontakt.
- Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det punkt, hvor de kommer ud af apparatet.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Brug kun den vogn, stativ, stativ, beslag eller bord, der er specificeret af producenten eller solgt sammen med apparatet. Når en vogn bruges, skal du være forsigtig, når du flytter kombinationen af vognen/apparatet for at undgå skader ved at vælte.
- Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
- Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
Produkt overview
The Behringer NX4-6000 is a powerful 4-channel amplifier designed for demanding audio environments. Its front panel features intuitive controls and indicators for each channel, while the rear panel provides comprehensive connectivity options.
Figur 1: Front view of the Behringer NX4-6000 Power Amplifer. Dette billede viser amplifier's front panel, featuring four distinct channels, each equipped with signal and protect/limit indicators. Below these indicators are individual gain control knobs for each channel (CH A, CH B, CH C, CH D). A prominent power button is located on the right side. The unit is presented in a sleek black finish, designed for rack-mounting, with ventilation grilles on both sides of the front panel.
Frontpanelets funktioner:
- Kanalforstærkningskontroller: Individual rotary knobs for adjusting the input level of each of the four channels (CH A, CH B, CH C, CH D).
- Signalindikatorer: LED indicators for each channel that illuminate when an audio signal is present.
- Protect/Limit Indicators: LEDs that indicate when the amplifier is in protect mode (due to overload or fault) or when the signal is clipping (limiting).
- Power knap: Main switch to turn the amplivligere til eller fra.
- Ventilationsgitre: Designed for optimal airflow to keep the unit cool during operation.
Funktioner bagpanel (generelt):
- Indgangsstik: Typically XLR and/or 1/4" TRS for balanced audio input.
- Udgangsstik: Speakon connectors for connecting to loudspeakers.
- Strømindtag: IEC connector for the AC power cord.
- Køleventilatorer: Til termisk styring.
- Modeskift: (e.g., Stereo, Mono, Bridge) and Crossover settings (if applicable).
Opsætning
Udpakning og inspektion:
- Pak forsigtigt ud amplifier and retain the packaging materials for future transport or storage.
- Undersøg enheden for tegn på skader, der kan være opstået under transporten. Kontakt straks din forhandler, hvis der konstateres skader.
Placering og ventilation:
- Sørg for tilstrækkelig ventilation omkring amplifier. Do not block the ventilation openings.
- For rack-mounting, ensure proper airflow within the rack. Avoid placing the ampvarmelegeme direkte over varmeproducerende udstyr.
- Placer amplifier on a stable, level surface if not rack-mounting.
Forbindelser:
Før du foretager nogen tilslutninger, skal du sørge for, at ampApparatet er slukket og taget ud af stikkontakten.
- Indgangsforbindelser: Tilslut din lydkilde (mixer, forforstærker)amplifier, etc.) to the input connectors on the rear panel using high-quality balanced XLR or 1/4" TRS cables. Ensure correct channel assignment (e.g., Left to CH A, Right to CH B).
- Udgangsforbindelser: Connect your loudspeakers to the Speakon output connectors. Ensure the correct impedance matching between the amplifier and your speakers. Refer to the amplifier's specifications and your speaker's specifications for compatible impedance ranges. The NX4-6000 features Smart Sense Loudspeaker Impedance Compensation for optimized performance.
- Strømtilslutning: Connect the supplied AC power cord to the power inlet on the rear panel and then to a grounded electrical outlet. Ensure the power supply voltage matcher amplifier's requirements (100V as per specifications).
Note: Always use appropriate cables for audio signals and speaker connections to prevent signal loss or damage.
Betjeningsvejledning
Tænd/sluk:
- Ensure all gain controls on the front panel are set to their minimum position (fully counter-clockwise) before powering on.
- Tryk på tænd/sluk-knappen på frontpanelet for at tænde amplifier on. The Power LED will illuminate.
- When powering off, first reduce all gain controls to minimum, then press the Power button.
Justering af forstærkning:
- Start with the gain controls at their minimum.
- Play audio through your source at a moderate level.
- Slowly increase the gain control for each channel until the desired volume is achieved.
- Monitor the Signal and Protect/Limit LEDs. The Signal LED should flicker with audio presence. If the Protect/Limit LED illuminates frequently or stays on, reduce the gain to prevent clipping and potential damage to speakers or the amplivligere.
Operating Modes (Refer to Rear Panel):
The NX4-6000 may feature switches on the rear panel to select different operating modes:
- Stereo-tilstand: Each channel operates independently, receiving its own input signal and driving its own speaker.
- Mono-tilstand: Combines input signals to a single mono output, typically used for driving multiple speakers with the same signal.
- Brotilstand: Combines two channels into a single, more powerful mono output, typically used for driving a single, high-power subwoofer. Consult the manual for specific bridging instructions and minimum impedance requirements.
Forsigtighed: Incorrect impedance matching in Bridge mode can severely damage the amplifier and speakers. Always verify speaker impedance before operating in Bridge mode.
Opretholdelse
Rensning:
- Afbryd altid ampFjern strømforsyningen fra strømforsyningen før rengøring.
- Brug en blød, tør klud til at rengøre de udvendige overflader.
- Do not use abrasive cleaners, solvents, or waxes.
- Periodically clean the ventilation grilles to ensure proper airflow and prevent dust buildup. A soft brush or vacuum cleaner with a brush attachment can be used.
Opbevaring:
- Hvis du opbevarer amplifier for an extended period, ensure it is clean and dry.
- Store it in a cool, dry place, away from direct sunlight and extreme temperatures.
- Det anbefales at opbevare amplifier in its original packaging to protect it from dust and physical damage.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm / Enheden tænder ikke. | Netledning ikke tilsluttet; Stikkontakt defekt; Intern sikring sprunget. | Check power cord connection; Try a different outlet; Contact qualified service personnel. |
| Ingen lydudgang. | Input cables disconnected/faulty; Speaker cables disconnected/faulty; Gain controls set too low; Amplifer i beskyttelsestilstand. | Check all cable connections; Increase gain slowly; Check Protect/Limit LED – if lit, power cycle the unit and check speaker impedance. |
| Distorted sound / Clipping. | Input signal too high; Gain set too high; Speaker impedance mismatch. | Reduce input signal level from source; Reduce amplifier gain; Verify speaker impedance matches amplifier specifikationer. |
| Amplifier overheats. | Blocked ventilation; Excessive load/continuous high output. | Ensure ventilation openings are clear; Reduce output level or provide additional cooling. |
| Protect/Limit LED constantly on. | Overload, short circuit, or thermal issue; Speaker impedance too low. | Sluk amplifier, disconnect speakers, wait a few minutes, then reconnect and power on. If issue persists, check speaker impedance and cables for shorts. Contact service if problem continues. |
If the problem persists after attempting these solutions, please contact qualified service personnel or Behringer customer support.
Specifikationer
| Feature | Detalje |
|---|---|
| Model | NX4-6000 |
| Mærke | Behringer |
| Type | Ultra-Lightweight 4-Channel Class-D Power Amplivligere |
| Output Wattage | 6000 Watts (Peak), 6400 Watts (as per some specifications) |
| Kanaler | 4 |
| Teknologi | Class-D with Smart Sense Loudspeaker Impedance Compensation |
| Produktdimensioner | 48.31 x 31.6 x 9.4 cm (ca. 19 x 12.4 x 3.7 tommer) |
| Varens vægt | 6.1 kg (ca. 13.45 lbs) |
| Farve | Sort |
| Strømkilde | Elektrisk med ledning |
| Voltage | 100V (as per specifications) |
| Kompatible enheder | Smartphone, Tablet, MP3-afspiller, Stationær computer, Fjernsyn, Projektor, Bærbar computer |
| Connector Type | RCA, Speakon (Inputs typically XLR/TRS, Speakon for outputs) |
| Fabrikant | Intellimix MG CA |
| Dato først tilgængelig | 11. november 2018 |
Garanti og support
Behringer products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Behringer webwebsted. Garantivilkårene kan variere fra region til region.
For technical support, service, or spare parts, please contact your authorized Behringer dealer or visit the support section of the Behringer website. When contacting support, please have your product model number (NX4-6000) and serial number ready.
Online ressourcer:
