Signature Hardware SH433254

Signature Hardware Cooper 23-3/4" Solid Brass Towel Rack (Model SH433254)

Instruction Manual - Chrome Finish

1. Introduktion

Thank you for choosing the Signature Hardware Cooper 23-3/4" Solid Brass Towel Rack. This manual provides essential information for the safe installation, proper use, and maintenance of your new towel rack. Please read these instructions thoroughly before beginning installation and retain them for future reference.

The Cooper Towel Rack is designed to provide a stylish and functional solution for organizing towels in your bathroom. Constructed from solid brass with a durable chrome finish, it offers long-lasting performance and aesthetic appeal.

2. Sikkerhedsoplysninger

Overhold venligst følgende sikkerhedsforanstaltninger under installation og brug:

  • Brug altid passende personlige værnemidler, såsom sikkerhedsbriller, under installationen.
  • Ensure the mounting surface is structurally sound and capable of supporting the weight of the towel rack and any towels placed on it.
  • Use only the provided mounting hardware or suitable alternatives recommended for your specific wall type.
  • Keep small parts and tools out of reach of children.
  • Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret fagmand.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • Cooper 23-3/4" Solid Brass Towel Rack (Chrome Finish)
  • Monteringshardware (skruer, ankre osv.)

If any parts are missing or damaged, please contact Signature Hardware customer support.

4. Opsætning og installation

The Cooper Towel Rack is designed for wall-mounted installation. All necessary mounting hardware is included for a standard installation.

  1. Vælg placering: Select a suitable location on your bathroom wall, ensuring it is at an appropriate height and clear of any electrical wiring or plumbing.
  2. Marker monteringspunkter: Hold the towel rack against the wall at the desired height and use a pencil to mark the locations for the mounting screws. Ensure the marks are level.
  3. Forbered væg: Depending on your wall material (e.g., drywall, tile), drill pilot holes at the marked locations. If installing into drywall, insert appropriate wall anchors.
  4. Sikre monteringsbeslag: Attach the mounting brackets to the wall using the provided screws, ensuring they are firmly tightened.
  5. Attach Towel Rack: Position the towel rack onto the secured mounting brackets. Tighten any set screws or fasteners to firmly secure the rack to the brackets.
  6. Endelig kontrol: Gently pull on the installed towel rack to ensure it is securely fastened to the wall before placing towels on it.
Signature Hardware Cooper 23-3/4 inch Solid Brass Towel Rack in Chrome, mounted on a wall with towels.
This image displays the Signature Hardware Cooper Towel Rack, featuring a chrome finish. It is wall-mounted above a lower towel bar, holding folded towels. The design includes a top shelf for folded towels and a bar below for hanging towels.

5. Brug

The Cooper Towel Rack provides convenient storage for your bathroom towels:

  • Use the top shelf for neatly folded bath towels, hand towels, or other bathroom essentials.
  • Hæng damp towels on the lower bar to allow them to air dry.
  • Avoid overloading the rack beyond its intended capacity to ensure stability and longevity.

6. Vedligeholdelse

To maintain the appearance and durability of your chrome-finished towel rack, follow these cleaning guidelines:

  • Rengør regelmæssigt med en blød, damp klæde.
  • For more thorough cleaning, use a mild soap solution and rinse thoroughly with clean water.
  • Dry the surface immediately with a soft, dry cloth to prevent water spots and maintain the shine.
  • Gør ikke use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.

7. Fejlfinding

If you encounter any issues with your towel rack, consider the following:

  • Loose Rack: If the towel rack feels loose, check the mounting screws and set screws. Tighten them as necessary. Ensure the wall anchors (if used) are properly installed and secure.
  • Mat finish: Refer to the maintenance section for proper cleaning techniques to restore shine.

For persistent issues or concerns not addressed here, please contact Signature Hardware customer support.

8. Specifikationer

SpecifikationDetalje
ModelnummerSH433254
MærkeSignatur hardware
MaterialeMassiv messing
Finish TypeChrome
FarveChrome
Samlet bredde65.09 cm (25-5/8")
Width (Center to Center)60.32 cm (23-3/4")
Højde11.43 cm (4-1/2")
Depth (Projection)21.59 cm (8-1/2")
InstallationstypeVægmonteret
Varens vægt2 pund (0.91 kg)
UPC781889520253
Dato først tilgængelig28. november 2018

9. Garanti og support

The Signature Hardware Cooper Towel Rack is covered by a 10 års begrænset garantiDenne garanti dækker materiale- og fabrikationsfejl under normal brug og service.

For warranty claims, technical assistance, or any questions regarding your product, please contact Signature Hardware customer support directly. Please have your model number (SH433254) and proof of purchase available when contacting support.

You can find more information and contact details on the official Signature Hardware webwebsted.

Relaterede dokumenter - SH433254

Preview Provincetown Bathroom Accessories Parts Breakdown - Signature Hardware
Detailed parts breakdown and illustration for the Provincetown collection of bathroom accessories by Signature Hardware. Includes SKUs, part numbers, and multilingual part names.
Preview Drea Bathroom Accessories - Signature Hardware Parts & Installation Guide
Explore the Drea collection of bathroom accessories from Signature Hardware. This document details parts, SKUs, and installation components for towel bars, robe hooks, towel rings, and toilet paper holders, including a comprehensive parts list.
Preview Lexia badeværelsestilbehør installationsvejledning
Trinvise installationsvejledninger til Signature Hardwares Lexia badeværelsestilbehør, inklusive værktøj, materialer og vigtige råd før installation.
Preview Berwyn Bathroom Accessory Installation Guide | Signature Hardware
Detailed installation instructions for the Berwyn Bathroom Accessory collection from Signature Hardware. Includes tools, materials, and step-by-step guidance for easy setup of towel bars and tissue holders.
Preview Specifikationer for Signature Hardware Lexia trykbalanceret bruseventil til trim og indbygningsventil
Comprehensive specifications for the Signature Hardware Lexia Pressure Balance Shower Valve Trim (SHLE8010) and the associated Pressure Balance Tub & Shower Rough-In Valve (SH4001). Details include features, materials, flow rate, dimensions, certifications, and model numbers.
Preview Installationsvejledning til Signature Hardware Supply Stop
Detaljerede installationsvejledninger til Signature Hardware Supply stopventiler, inklusive SKU-numre SH231, SH251 og SH254. Dækker forberedelse, værktøj, indløbs- og udløbsinstallation til kobberkompressions- og svedfittings.