1. Produktet er slutview
The Caso Design Fomini Crema Inox Electric Milk Frother is engineered to produce rich and creamy hot or cold milk froth, ideal for beverages such as Latte Macchiato, Cappuccino, or hot chocolate. Its design incorporates a double non-stick coating to prevent milk from burning and features an automatic shutoff for safe operation.
Figur 1.1: Forside view of the Caso Design Fomini Crema Inox Electric Milk Frother, showcasing its sleek stainless steel design and control buttons.
Nøglefunktioner:
- Electric appliance for frothing and heating milk, suitable for home use.
- Optimized for preparing hot chocolate, latte macchiato, and cappuccino.
- Features a non-stick coating and auto shutoff to prevent milk from burning.
- Designed for small portions: heats up to 6.8 fl. oz. and froths up to 3.4 fl. oz.
- Sleek stainless steel construction with a heat-insulating comfort grip.
2. Sikkerhedsinstruktioner
Please read all safety instructions carefully before using the appliance to ensure safe operation and prevent damage.
- Tilslut altid apparatet til en jordforbundet stikkontakt.
- Do not immerse the appliance base, cord, or plug in water or other liquids.
- Sørg for, at apparatet er placeret på en stabil, plan og varmebestandig overflade.
- Brug ikke apparatet, hvis ledningen eller stikket er beskadiget, eller hvis apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde.
- Keep the appliance out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities.
- Do not fill above the maximum fill line indicated inside the frother.
- Lad apparatet afkøle helt inden rengøring.
- Use only the provided whisk attachments.
3. Inkluderede komponenter
Your Caso Design Fomini Crema Inox Electric Milk Frother package includes the following items:
- 1 x mælkeskummerenhed
- 2 x Whisk Attachments (one for frothing, one for heating)
- 1 x brugermanual
- 1 x garantikort
Figur 3.1: Interiør view of the frother, showing the whisk attachment securely placed at the bottom. The interior features a non-stick coating and fill level indicators.
4. Opsætning
Følg disse trin før første brug:
- Pakker ud: Fjern forsigtigt alle emballagematerialer, og kontroller for eventuelle skader.
- Ren: Wash the interior of the frother and the whisk attachments with warm soapy water. Rinse thoroughly and dry. Do not immerse the exterior of the frother or the base in water.
- Placering: Place the frother unit on a clean, dry, and stable surface near a power outlet.
- Fastgør piskeris: Select the appropriate whisk attachment (frothing whisk for foam, heating whisk for just heating) and place it securely onto the pin at the bottom of the frother's interior.
5. Betjening
The Caso Design Fomini Crema Inox Electric Milk Frother features two main buttons for operation: one for hot frothing/heating and one for cold frothing.
Figur 5.1: Nærbillede view of the control panel, showing the hot (three wavy lines) and cold (snowflake) buttons for different functions.
5.1. Frothing Hot Milk (for Cappuccino, Latte Macchiato)
- Ensure the frothing whisk attachment is correctly installed.
- Pour cold milk into the frother. Do not exceed the "MAX FROTH" fill line (approx. 3.4 fl. oz.).
- Læg låget på skummeren.
- Press the top button (indicated by three wavy lines) once. The button will illuminate, and the frother will begin heating and frothing the milk.
- Skummeren stopper automatisk, når processen er færdig.
- Fjern forsigtigt låget og hæld den skummede mælk over.
5.2. Frothing Cold Milk (for Iced Coffee, Cold Foam)
- Ensure the frothing whisk attachment is correctly installed.
- Pour cold milk into the frother. Do not exceed the "MAX FROTH" fill line (approx. 3.4 fl. oz.).
- Læg låget på skummeren.
- Press the bottom button (indicated by a snowflake icon) once. The button will illuminate, and the frother will begin frothing the milk without heating.
- Skummeren stopper automatisk, når processen er færdig.
- Carefully remove the lid and pour the cold frothed milk.
5.3. Heating Milk (without Frothing)
- Replace the frothing whisk with the heating whisk attachment (if provided, typically a flat ring).
- Pour cold milk into the frother. Do not exceed the "MAX HEAT" fill line (approx. 6.8 fl. oz.).
- Læg låget på skummeren.
- Press the top button (indicated by three wavy lines) once. The button will illuminate, and the frother will begin heating the milk.
- The frother will automatically stop when the milk reaches the optimal temperature.
- Carefully remove the lid and pour the hot milk.
Figure 5.2: The frother in operation, with the hot frothing button illuminated in red, indicating the heating and frothing process is active.
6. Vedligeholdelse og rengøring
Proper cleaning ensures the longevity and optimal performance of your milk frother. Always unplug the appliance before cleaning.
- Tag stikket ud og køl ned: Disconnect the frother from the power outlet and allow it to cool down completely after each use.
- Fjern piskeris: Carefully remove the whisk attachment from the frother.
- Rent interiør: Wash the interior of the frother and the whisk attachments with warm water and a mild dish soap. Use a soft sponge or cloth to avoid scratching the non-stick coating.
- Skyl og tør: Rinse the interior and whisk thoroughly with clean water. Dry all parts completely before storing.
- Rent ydre: Tør ydersiden af skummeren af med enamp klæde. Brug ikke slibende rengøringsmidler eller skuresvampe.
- Vigtig: Do not immerse the main frother unit or its electrical base in water or any other liquid.
Figure 6.1: Detail of the heat-insulating comfort grip, which should be wiped clean with a damp klæde.
7. Fejlfinding
If you encounter issues with your milk frother, please refer to the following table for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skummeren tænder ikke. | Ikke tilsluttet; problem med stikkontakt; funktionsfejl på apparatet. | Ensure the frother is securely plugged into a working outlet. Try a different outlet. If problem persists, contact customer support. |
| Mælken skummer eller varmes ikke ordentligt. | Incorrect whisk attachment; milk level too high/low; type of milk; whisk not properly installed. | Ensure the correct whisk is used for the desired function. Check milk levels are within MIN/MAX lines. Use cold, fresh milk (dairy or suitable plant-based). Re-install whisk securely. |
| Milk overflows during operation. | Overfilled frother. | Do not exceed the "MAX FROTH" or "MAX HEAT" fill lines. |
| Brændende lugt eller mælk, der klistrer til bunden. | Residue from previous use; internal issue. | Clean the frother thoroughly after each use. If the problem persists after cleaning, discontinue use and contact customer support. |
8. Specifikationer
| Ejendom | Værdi |
|---|---|
| Mærke | Caso Design |
| Modelnavn | Fomini Crema Inox Electric Milk Frother |
| Modelnummer | 11663 |
| Farve | Sort |
| Materiale | Rustfrit stål |
| Kapacitet (opvarmning) | 6.8 væskeouncer (ca. 200 ml) |
| Kapacitet (skumdannelse) | 3.4 væskeouncer (ca. 100 ml) |
| Strømkilde | Elektrisk |
| Produktdimensioner | 7.9 x 3.93 x 7.87 tommer (20.07 x 9.98 x 19.99 cm) |
| Varens vægt | 2.25 pund (1.02 kg) |
| GTIN | 04047849116635 |
| Plejevejledning | Kun håndvask |
| Dato først tilgængelig | 13. december 2018 |
9. Garanti og support
Your Caso Design Fomini Crema Inox Electric Milk Frother comes with a manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of the warranty.
For technical support, service, or warranty claims, please contact Caso Design customer service. Contact information can typically be found on the warranty card or the official Caso Design webwebsted.
For more information, visit the official Caso Design Store: Caso Design Store on Amazon
