Itek Patriot Mini Evo Case User Manual

Indledning

Velkommen til brugermanualen til Itek Patriot Mini Evo mATX PC Case. This manual provides essential information for setting up, operating, and maintaining your new computer case. Please read this manual thoroughly before beginning installation to ensure proper assembly and safe operation.

Sikkerhedsoplysninger

Always observe the following safety precautions when handling and installing computer components:

• Ensure your computer is unplugged from the power outlet before opening the case or performing any installation.
• Avoid touching internal components unnecessarily. Static electricity can damage sensitive electronics.
• Handle all components with care to prevent physical damage.
• Hold kabinettet og komponenterne væk fra væsker og overdreven fugt.
• Sørg for tilstrækkelig ventilation omkring kabinettet for at forhindre overophedning.

Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Itek Patriot Mini Evo PC Case
• Accessory Screw Kit
• Brugervejledning (dette dokument)

Produkt overview

Familiarize yourself with the various parts of your Itek Patriot Mini Evo case.

Ekstern View

This image shows the overall external design of the Itek Patriot Mini Evo PC case from a front-left angle. It features a compact mini-tower form factor with a mesh front panel for airflow and a solid side panel.

Internt layout

Det indre view highlights the motherboard tray, compatible with mATX motherboards. It includes designated mounting points for 2.5-inch SSDs and 3.5-inch HDDs, along with cutouts for efficient cable management.

Bagpanel

The rear panel features the bottom-mounted power supply unit (PSU) bay, expansion slots for graphics cards and other add-in cards, and a rear fan mounting area for exhaust.

Front I/O panel

Located on the top front of the case, the I/O panel provides easy access to one USB 3.0 port, one USB 2.0 port, HD audio jacks (headphone and microphone), power and reset buttons, and a convenient SD/TF card reader.

Opsætning og installation

Follow these steps to install your components into the Itek Patriot Mini Evo case.

1. Forberedelse af sagen

1. Placer etuiet på en flad, stabil overflade.
2. Remove the side panel by unscrewing the thumbscrews at the rear and sliding the panel backward.

2. Installation af bundkort

1. Install the necessary motherboard standoffs into the case tray according to your mATX motherboard's screw holes.
2. Carefully place your mATX motherboard onto the standoffs, aligning the screw holes.
3. Fastgør bundkortet med de passende skruer fra tilbehørssættet.

3. Drevinstallation

1. 2.5" SSD'er: Mount SSDs directly onto the designated 2.5" drive bays using screws.
2. 3.5" harddiske: Install HDDs into the 3.5" drive cage, typically secured with screws.

4. Installation af strømforsyningsenhed (PSU)

1. Slide your PSU into the bottom mounting bay from the rear of the case.
2. Secure the PSU with screws from the outside rear of the case.

5. Kabelforvaltning

1. Route power cables and data cables through the cable management cutouts behind the motherboard tray.
2. Use zip ties or Velcro straps (not included) to bundle and secure cables for better airflow and a cleaner build.

6. Tilslutning af frontpanelkabler

1. Connect the USB 3.0, USB 2.0, HD Audio, Power SW, Reset SW, Power LED, and HDD LED cables from the case's front panel to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Operation

Once all components are installed and connected, replace the side panel and secure it with the thumbscrews. You can now connect your peripherals and power cable to the system.

• Tænder: Press the Power button on the top front I/O panel to turn on your computer.
• Brug af USB-porte: Connect USB devices to the available USB 3.0 or USB 2.0 ports on the front panel.
• Using Card Reader: Insert SD or TF cards into the dedicated card reader slot on the front panel to access data.
• Lydforbindelser: Plug your headphones or microphone into the HD audio jacks.

Opretholdelse

Regular maintenance helps ensure the longevity and optimal performance of your PC case and components.

• Støvrensning: Periodically clean dust from the case, especially from the front mesh panel and any fan filters, using compressed air or a soft brush. Dust buildup can impede airflow and lead to overheating.
• Udvendig rengøring: Tør ydersiden af ​​kabinettet af med en blød, tør klud.amp klud. Undgå barske kemikalier eller slibende materialer.
• Intern inspektion: Every few months, open the side panel to inspect internal components for dust and ensure all cables are securely connected.

Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

Specifikationer

Key technical specifications for the Itek Patriot Mini Evo PC Case:

Garanti og support

Specific product warranty information is not provided within the available product details. For warranty claims, technical support, or inquiries regarding spare parts, please contact Itek customer support directly through their official webwebsted eller autoriserede distributører.