MST MT29 Custom Wheel User Manual

1. Produktet er slutview

The MST MT29 Custom Wheel is designed for automotive applications, offering a specific set of dimensions and characteristics for vehicle fitment. This manual provides essential information for the proper installation, maintenance, and care of your new wheel.

Nøglefunktioner omfatter:

• Wheel Size: 15x6.5 inches
• Bolt Pattern: 4x100
• Offset: 35mm
• Center Bore: 73.1mm
• Farve: Mat sort

Figur 1: Forside view of the MST MT29 Custom Wheel, showcasing its five-spoke design and matte black finish.

2. Specifikationer

3. Opsætning og installation

Proper installation of your new wheels is crucial for safety and performance. It is highly recommended that wheel installation be performed by a qualified automotive technician. Incorrect installation can lead to serious injury or damage to your vehicle.

3.1 Kontrol før installation

• Verify that the wheel specifications (size, bolt pattern, offset, center bore) match your vehicle's requirements.
• Inspect each wheel for any signs of damage from shipping. Do not install damaged wheels.
• Ensure you have the correct lug nuts for these wheels. Tapered seat lug nuts are typically required for aftermarket wheels.
• Confirm that the hub bore of the wheel fits snugly over the vehicle's hub. If the wheel's center bore is larger than the vehicle's hub, hub centric rings are required to ensure proper wheel centering and prevent vibrations.

3.2 Installationstrin (professionel installation anbefales)

1. Safely lift and support the vehicle using appropriate jack stands.
2. Remove the old wheel and tire assembly.
3. Clean the vehicle's hub surface thoroughly to remove any rust, dirt, or debris.
4. Mount the new wheel onto the hub, ensuring it sits flush. If using hub centric rings, install them first.
5. Install lug nuts by hand, ensuring they thread smoothly. Do not use power tools for initial tightening.
6. Lower the vehicle partially so the tire just touches the ground, preventing the wheel from spinning freely.
7. Using a torque wrench, tighten the lug nuts in a star pattern to the vehicle manufacturer's specified torque settings. Refer to your vehicle's owner's manual for correct torque values.
8. Fully lower the vehicle and remove jack stands.
9. After driving approximately 50-100 miles, re-torque all lug nuts to ensure they remain properly tightened.

Figur 2: Bagside view of the MST MT29 Custom Wheel, highlighting the hub area and the 4x100 bolt pattern.

4. Operating and Usage Considerations

While wheels do not have "operating" functions in the traditional sense, proper usage and care are essential for their longevity and your safety.

• Dækmontering: Always have tires mounted by a professional using proper equipment to avoid damaging the wheel finish or structure.
• Balancering: Ensure wheels and tires are properly balanced after mounting to prevent vibrations and uneven tire wear.
• Road Hazards: Avoid driving over potholes, curbs, or other road hazards that could bend, crack, or otherwise damage the wheel.
• Belastningskapacitet: Do not exceed the maximum load capacity of the wheel, which is designed for passenger car use.

5. Vedligeholdelse

Regular maintenance will help preserve the appearance and integrity of your MST MT29 wheels.

5.1 Rengøring

• Rengør hjulene regelmæssigt med mild sæbe og vand.
• Avoid harsh abrasive cleaners, acid-based cleaners, or stiff brushes, as these can damage the matte black finish.
• Skyl grundigt med rent vand og tør med en blød klud for at undgå vandpletter.
• For stubborn brake dust, use a pH-neutral wheel cleaner specifically designed for matte finishes.

5.2 Eftersyn

• Undersøg regelmæssigt hjulene for tegn på skader, såsom revner, bøjninger eller dybe ridser.
• Check lug nuts for proper torque at regular intervals, especially after tire rotations or any wheel removal.
• Ensure valve stems are intact and not leaking air.

6. Fejlfinding

This section addresses common issues that may arise with automotive wheels.

6.1 Vibrations After Installation

• Årsag: Improper balancing, loose lug nuts, incorrect hub centering, or bent wheel.
• Løsning:
  • Re-check lug nut torque.
  • Have wheels and tires re-balanced by a professional.
  • Verify that hub centric rings are correctly installed if needed.
  • Inspect wheels for damage.

6.2 Air Loss from Tire

• Årsag: Puncture, faulty valve stem, improper tire bead seal, or cracked wheel.
• Løsning:
  • Inspect tire for punctures.
  • Check valve stem for leaks.
  • Have a professional inspect the tire bead and wheel for damage.

7. Garanti og support

Specific warranty information for MST products is typically provided at the point of purchase or on the manufacturer's official webwebsted. Gem venligst din købsbevis i tilfælde af garantikrav.

For technical support, installation questions, or warranty inquiries, please contact MST customer service or your authorized dealer. Contact information can usually be found on the MST official webhjemmeside eller gennem din produktforhandler.

Note: Damage caused by improper installation, misuse, neglect, road hazards, or unauthorized modifications is typically not covered under warranty.