GRIFEMA G4001W Kitchen Tap Instruction Manual

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your new GRIFEMA G4001W Kitchen Tap. Please read these instructions carefully before installation and retain them for future reference. Proper installation and care will ensure optimal performance and longevity of your product.

Sikkerhedsoplysninger

• Sørg for, at hovedvandforsyningen er slukket, inden installationsarbejdet påbegyndes.
• Brug passende personlige værnemidler, såsom handsker og øjenbeskyttelse.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
• Do not use abrasive cleaners or harsh chemicals on the tap's finish.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x GRIFEMA G4001W Kitchen Tap (White finish)
• 2 x 40 cm Flexible Hose Pipes (for hot and cold water connection)
• 1 x Installation Kit (includes mounting hardware, washers, and nuts)

Image: The GRIFEMA G4001W kitchen tap in white, shown with its main components including the tap body, flexible hoses, and mounting hardware.

Specifikationer

Image: Detailed dimensions of the GRIFEMA G4001W kitchen tap, showing spout height (9.7 inches / 246mm) and overall height (15.1 inches / 383mm).

Installationsvejledning

Følg disse trin for en vellykket installation:

1. Forbered installationsområdet: Turn off the main water supply. Clear the area under the sink and ensure the mounting surface is clean and dry. The tap requires a single hole for mounting.
2. Install the Tap Body: Insert the tap body into the mounting hole on your sink or countertop. Ensure the tap is correctly oriented.
3. Fastgør hanen: From underneath the sink, slide the rubber washer, metal washer, and then the fixing nut onto the threaded shank of the tap. Tighten the fixing nut securely using the provided tool or an adjustable wrench. Do not overtighten.
4. Tilslut vandslanger: Attach the two flexible hose pipes to the corresponding hot and cold water inlets on the tap body. Ensure a tight seal. Connect the other ends of the flexible hoses to your hot and cold water supply lines. Use appropriate adapters if necessary (e.g., 3/8" to 15mm).
5. Tjek for lækager: Once all connections are secure, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are present, turn off the water supply and re-tighten the connections.
6. Test drift: Allow water to run through the tap for a few minutes to flush out any debris. Check the hot and cold water flow and the swivel function.

Image: The GRIFEMA G4001W tap dispensing water, highlighting the integrated water-saving aerator (NEOPERL Flow Ready) for efficient water usage.

Operation

The GRIFEMA G4001W Kitchen Tap features a single lever handle for controlling both water flow and temperature, along with a 360° swivel spout for convenience.

• Vandstrømskontrol: Lift the lever handle upwards to increase water flow. Push it downwards to decrease or stop the flow.
• Temperature Control (Cold Start - Kelogic):

  The tap incorporates a Cold Start system. When the lever is in the central position, only cold water flows, helping to save energy. To obtain hot water, move the lever to the left. Moving it to the right will increase the cold water flow.

  

  Image: Illustration of the Cold Start (Kelogic) system, showing the lever position for cold water (center) and hot water (left), emphasizing water and energy savings, and low noise operation.
• Drejelig tud: The spout can rotate 360 degrees, allowing for flexible use across multiple sink bowls or for filling large pots outside the sink area.

  Image: The GRIFEMA G4001W kitchen tap demonstrating its 360-degree swivel functionality, showing the spout rotating freely.

Vedligeholdelse og pleje

Regular cleaning and proper care will help maintain the appearance and functionality of your GRIFEMA G4001W Kitchen Tap.

• Rengøring af finishen: Clean the tap regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots. Avoid abrasive cleaners, scouring pads, or harsh chemicals (e.g., ammonia, bleach, alcohol-based cleaners) as these can damage the finish.
• Vedligeholdelse af belufter: If water flow becomes restricted, the aerator may be clogged with debris or mineral deposits. Unscrew the aerator from the end of the spout, clean it under running water, and remove any particles. You can soak it in a vinegar solution to dissolve mineral buildup. Reassemble the aerator securely.
• Keramisk skivepatron: The tap is equipped with a durable ceramic disc cartridge. In case of persistent drips or leaks from the handle, the cartridge may need replacement. This is typically a task for a qualified plumber.

Fejlfinding

Se tabellen nedenfor for almindelige problemer og deres mulige løsninger:

Garanti og support

GRIFEMA products are designed for quality and durability. For specific warranty details and customer support, please refer to the warranty card included with your purchase or visit the official GRIFEMA website. Our customer service team is available to assist with any questions or concerns regarding your product.

For further assistance, please contact GRIFEMA customer support through their official channels.