1. Introduktion
Thank you for choosing the Keenso 66mm Universal Digital LED Motorcycle Speedometer Odometer Tachometer. This manual provides essential information for the proper installation, operation, and maintenance of your new device. Please read these instructions carefully before use to ensure optimal performance and safety.
Sikkerhedsforanstaltninger:
- Always ensure the motorcycle's power is off before attempting any installation or wiring.
- Incorrect wiring can damage the device or the motorcycle's electrical system. If unsure, consult a qualified technician.
- Sørg for, at alle forbindelser er sikre og isolerede for at forhindre kortslutninger.
- Do not attempt to disassemble or modify the unit, as this may void the warranty and cause malfunction.
2. Produktet er slutview
The Keenso 66mm Universal Digital LED Motorcycle Speedometer Odometer Tachometer is a multi-functional instrument designed for motorcycles with a 12V power supply. It features a clear digital display with backlight for easy readability in various lighting conditions.

Figur 2.1: En front view of the Keenso 66mm Universal Digital LED Motorcycle Speedometer Odometer Tachometer, showcasing dens kompakte sorte casing and illuminated digital display.
Nøglefunktioner:
- Universal kompatibilitet: Designed for all motorcycles with a 12V DC power supply.
- Multifunktionsskærm: Integrates speedometer, odometer, tachometer, and fuel gauge.
- Clear LED Backlight: Anti-glare clear lens with LED backlight ensures visibility in all conditions.
- Holdbar konstruktion: High-quality metal shell provides waterproof protection and resistance to minor collisions.
- Nem installation: Comes with a mounting bracket for simplified setup.

Figure 2.2: A close-up of the digital display, clearly labeling the Tachometer (x1000r/min), Speedometer (MPH/km/h), Odometer (TRIP/ODO), and Fuel Gauge (E-F) sections.
3. Specifikationer

Figure 3.1: A diagram illustrating the dimensions of the speedometer, including its 66mm diameter, 57mm height, 34cm cable length, and 72mm mount bracket length. A table below provides key specifications such as material, voltage, measurement range, and fitment.
| Specifikation | Værdi |
|---|---|
| Mærke | Keenso |
| Modelnummer | Keensoagnmpxve4w |
| Materiale | Metal |
| Skal farve | Sort |
| Linse farve | Klar |
| Voltage | 12V DC |
| Måleområde | 0-160 km/t |
| Enhed | KM / H |
| Diameter | 66 mm / 2.6 tommer |
| Højde | 57 mm / 2.2 tommer |
| Mount Bracket Length | 72 mm / 2.8 tommer |
| Distance Between Two Mount Screws | 45 mm / 1.8 tommer |
| Kabellængde | 34 cm / 13.4 tommer |
| Pakkevægt | Ca. 274 g |
| Tilpasning | Universal for all motorcycles with 12V power supply |
| Produktmål (L x B x H) | 9 x 9 x 9 cm |
4. Opsætning og installation
This speedometer is designed for straightforward installation. Follow these steps carefully:

Figure 4.1: This image details the rear of the speedometer, highlighting the clear lens with backlight, the high-quality plastic and metal waterproof shell, and the color-coded wiring connections for power, black light display, oil level display, and tachometer display.
Installationstrin:
- Montering: Securely attach the speedometer to your motorcycle using the provided mounting bracket. Ensure it is positioned for clear visibility and does not obstruct other controls.
- Ledningsforbindelser: Connect the wires according to the diagram below. It is crucial to match the wire functions correctly to avoid damage.
Ledningsdiagram:
- Full Black Wire: Positive Pole - Power Cable
- Grøn ledning: Negative Pole - Black Light Display (Ground)
- Blå/hvid ledning: Positive Pole - Oil Level Display
- Black/Red Wire: Positive Pole - Tachometer Display
After connecting all wires, ensure they are properly insulated and secured to prevent any accidental disconnections or short circuits during operation.
5. Betjeningsvejledning
Once installed and powered, the speedometer will display various information on its digital screen.

Figur 5.1: To views of the speedometer display: one in bright conditions showing the clear digital readout, and another in low light demonstrating the bright, anti-glare LED backlight.
Displayfunktioner:
- Speedometer: Viser den aktuelle hastighed i km/t.
- Kilometertæller (ODO): Shows the total distance traveled.
- Triptæller (TRIP): Displays the distance traveled for a single trip, which can be reset.
- Omdrejningstæller: Indicates engine RPM (revolutions per minute) in x1000r/min.
- Brændstofmåler: Shows the current fuel level (E for Empty, F for Full).
Justering af baggrundslysfarve:
The backlight color can be changed. To adjust the backlight color, press and hold the button located on the rear of the unit until the color changes to your desired setting.
6. Vedligeholdelse
To ensure the longevity and optimal performance of your Keenso speedometer, follow these simple maintenance guidelines:
- Rensning: Brug en blød, damp kluden til at rengøre skærmen og casing. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Vandtæt Design: The metal shell is designed to be waterproof and resistant to light collisions. However, avoid submerging the unit in water or exposing it to high-pressure water jets.
- Regelmæssig kontrol: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de forbliver fastgjorte og fri for korrosion.
7. Fejlfinding
If you encounter any issues with your speedometer, refer to the following common problems and solutions:
- Ingen skærm/strøm:
- Check all power connections (Full Black wire for positive, Green wire for negative).
- Ensure the motorcycle's 12V power supply is active.
- Check for any blown fuses in the motorcycle's electrical system.
- Inaccurate Speed/Tachometer Reading:
- Verify the Black/Red wire connection for the tachometer signal is correct and secure.
- Ensure the speedometer sensor (if external) is properly installed and calibrated according to your motorcycle's specifications.
- Some users have reported needing to adjust the tachometer for accuracy; this may require specific calibration steps not detailed in this general manual, or consultation with a technician.
- Fejl i brændstofmåler:
- Check the Blue/White wire connection to the oil level sensor.
- Ensure the motorcycle's fuel level sensor is functioning correctly.
- Display Flickering or Irregularities:
- Tjek for løse ledningsforbindelser.
- Ensure stable 12V DC power supply.
Hvis problemet fortsætter efter at have forsøgt disse fejlfindingstrin, bedes du kontakte kundesupport.
8. Garanti og support
Keenso stands behind the quality of its products. This speedometer comes with a 100% product guarantee. If you experience any issues or have questions regarding your Keenso 66mm Universal Digital LED Motorcycle Speedometer Odometer Tachometer, please do not hesitate to contact our customer service team via email. We are committed to providing the best customer service and will respond to your inquiries within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official Keenso store page.